Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Chargers & Accessories > Battery Charger (DC only)

  RATED:

Turnigy Smart6 80w 7A Balance Charger with Graph Screen

Turnigy Smart6 80w 7A Balance Charger with Graph Screen
Turnigy Smart6 80w 7A Balance Charger with Graph Screen

The Turnigy Smart6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 17S with a charge rate up to 7amp. The Smart6 also offers unique functions usually found in much more expensive equipment. The LCD screen shows an amps/volts graph throughout the charge/discharge process giving you easy to read, realtime data. Also shown are individual cell voltage during charge with realtime updates throughout the charge cycle. There is also resistance display for checking the condition/performance of your packs, no more guesswork!

Features;
Charge/Discharge paremeters Graph Display
Adjustable cut-off for charge/discharge functions
Measures the internal resistance of your battery for perfromance checking
Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
7A Max charge current
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store 10 packs in memory)
Battery break in and cycling.

Spec.
Input Voltage: 10~18v
Circuit power: Max Charge: 80W / Max Discharge: 5W
Charge Current Range: 0.1~7.0A
Discharge current range: 0.1~1.5A
Ni-MH/NiCd cells: 1~17
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 255g
Dimensions: 135x80x25mm

This charger has built in JST-XH balance ports, which makes it compatible with Flightmax,Turnigy, Rhino and any pack with a JST-XH adapter.



PRODUCT ID: Turnig-X6

Shipped from:
International Warehouse

Price

$46.80

acc.
  • Turnigy Lipo Bunker - Lipoly Safety Charge Box

    Combo Price: $22.91   IN STOCK
    Add to Cart

  • Car Cigarette Lighter Adapter for Battery Chargers

    Combo Price: $2.26   BACKORDER
    Add to Cart



Further discounts available for registered & logged-in customers.
 Customer rated
447
crowns
  
 
Total of 92 discussions.
Telmo  2 points - 2/27/2016
 
The charger is returning the following error Warning: Bat Pack Err when checking the battery, which is strange given that it can measure the voltage in each cell Any idea how to solve this?
 Caue 6 points
This chager has many firmware bugs! This the worst charger. My alway have some error message without any reason.
dejovano  1 points - 2/22/2016
 
I would like to know the exact range for "Professional User Only" settings for Terminal Voltage Control (TVC) (aka Adjustable cut-off for charge/discharge functions) for charge and discharge functions of LiPo, LiIo and LiFe batteries. I have read the whole manual and those information are missing. Thanks!
Joao  1 points - 12/31/2015
 
How can put my lipos in balance mode whit this charger ?? Lipos in question is 4s 5.200mha 10c tks in advance
 Caue 6 points
Yes you can, but I really do not recommend you to buy this one, it has many firmware bugs.
Michel_sn  8 points - 12/1/2015
 
Dear Sirs, after almost one year of use this units is showing a problem. The total voltage, that is a check prior to initialize the charger process, is showing unreal elevated voltage values, example: individual 3s cells showing correct values cells 4.0 * 4.0 *4.0 but total value shows 15V that abort charging start by "voltage err". Any idea to fix or calibrate it ?
 Caue 6 points
I've try to contact the manufctorer but they do not help me! This is the worst charger I've bought!
mikec@aloha.net  432 points - 2/12/2015
 
i'm disappointed. i used it with my 104 watt 7 a psu and i get an error message. like high voltage. 10 - 18 volts is the voltage range for this psu. the charger doesn't like 15 volts. i'll test it under 15 volts to see if it works. i may have to return this unit.
Customer Reviews
Review Blogs for this item
Turnigy Smart6 Balance Charger Review
Toumal
Overall Rating
FinnSpeed
81 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
This review is based on very quick test. I deliberately selected a worn 3s Lipo for this test knowing that the middle cell was beginning to give up and running lower than the two others. I had used a balancer but apparently the imbalance was too bad for it to fully deal with it and it could not charge the battery completely any more. To my surprise, this charger noticed what was going on, dropped the charge current to 300mA and kept the other two cells at 4.20V while the middle one was charging up. It took a little while but it looks like the middle cell was charged up to almost full capacity as well. Probably this battery is close to the end of its life but this test proves that this charger does something right! Being a skeptic person, I also followed the charging voltage with a Fluke 189 multimeter which has accuracy of ±0.025 when measuring DC voltage. The results were pretty good here as well: On the first three cells, the measurement differences were between 6mV and 15mV to the multimeter. In all cases the charger was underestimating the voltage which causes it to overcharge slightly but the error is very well within acceptable limit. I have not checked all the 6 channels (cells) since I had only 3s batteries to test with. There is a way to adjust the maximum charge voltage for each chemistry if you want to make sure that the cells are kept below recommended maximum. I


2 comments. Reply..

Overall Rating
wwmilan
641 likes
ValueUNRATED
QualityUNRATED
Like it?
Turnigy Smart 6
The unit Work very good, have charge 2200/4000 mamp 3S Lipo and 4000 4s Lipos w/o a problem, balance is very good (check or QC with a good voltmeter) so no complaints, I like very much this little charger, the Graphs is OK to understand how the battery is performing but I wish they had provided a manual with some explanations to interpreted better the graphs, HobbyKing should MINIMUM supply a manual in PDF format so you can download that is why one less star.
Pros: Good Quality, small foot print (easy to port to the field), accurate, user friendly (very intuitive menu), good quality
Cons: Letters on the screen are a little small (in my opinion), it don’t come with a complete set of charging cables (basically it only come with XT60 charging connector no deans or etc.) so you better get the others if you need then, no manual, No banana plugs to connect to the Power Supply (it only come with alligator clip connectors), discharging is only 2 Amps will be better is it was around 4 or 5 amps.


2 comments. Reply..

Overall Rating
HOOXSKY
19 likes
ValueUNRATED
QualityUNRATED
Like it?
i tested with 2200mah 3s lipo battery after full charge with smart6, cells are 4.20x4.20x4.20 full charged. easy menu, good cooling (not more noise), what i need i can see with one touch. and i plug "Temperature Sensor w/ Futaba plug (product id 11777)" to smart6 then i can read of battery temperature correctly.
and the smart6 charger manual link is www.link stars product to this price. thank HK and turnigy


1 comment. Reply..

Create an account
Overall Rating
ebiscom
38 likes
ValueUNRATED
QualityUNRATED
Like it?
acquisto deciso per le impostazioni manuali del voltaggio minimo e massimo che permettono di simulare la funzione storage, altrimenti non prevista nel menù


1 comment. Reply..

Create an account
Overall Rating
atomas72
29 likes
ValueUNRATED
QualityUNRATED
Like it?
Without storage function as described. Good product for this price.


1 comment. Reply..

.....click here to see all reviews
Aff. Link