Please confirm your location:



USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Chargers & Accessories > Battery Charger (DC only)

  RATED:

IMAX B6 Charger/Discharger 1-6 Cells (COPY)

IMAX B6 Charger/Discharger 1-6 Cells (COPY)

This is a copied B6 charger.
It's quality and reliability is not as good as the Genuine iMAX B6.

Features;
Microprocessor controlled
Delta-peak sensitivity
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.

Spec.
Input Voltage: 11~18v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Discharge current range: .1~1.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 277g
Dimensions: 133x87x33mm

This charger has a JST-XH charge plug, which makes it compatible with TURNIGY and ZIPPY LiPo.
Note: Power supply not included. 

ATTENTION: If you would like accurate and reliable charging, please see the related link below for the iMAX B6 GENUINE.


PRODUCT ID: IMAXB6-FAKE

This product available from a warehouse near you!


Weight: 465g
Quantity: 
International Warehouse
stock
10+
USA West Warehouse Out Of Stock
Price  $15.70

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
545
crowns
  
 
Total of 83 discussions.
ray BR  40 points - 1/29/2015
 
segundo o pessoal,esse carregador bate de frente com o GENUINE. segundo eles esse carregar é* tã*o bom como o GENUINE. estou confiando no pessoal e vou compra ele. according to the staff, this beats charger front with GENUINE.segundo them this charge is as good as the GENUINE. I'm trusting the staff and I will buy it.
 Paulo henrique 2 points
Ja comprei varias veses e te garanto que e de boa qualidade, pode comprar sem medo.
NewToHobbyKing  14819 points - 1/4/2015
 
How do you KNOW if you have a FAKE or not?
 NewToHobbyKing 14819 points
It does seem no one knows. I do know one has Square Rubber Feet and One has Round Rubber Feet. But which one????
 Mathias 32 points
If you have a hologram on the downside ist a original one ao af ake one the logo isnt as clear as it is by an original imax b6 for more Information look here https://www.youtube.com/watch?v=JacYAHJcjzo
BEST ANSWER CREDIT AWARDED
 NewToHobbyKing 14819 points
Well the Logo is clear on both but only one has a Hologram thanks!
 JOSH 16 points
That is right since I had this charger before but the real one not this fake one.
 Patrick 4 points
The descriptions states it's a copy and there's a link to the genuine Imax.
gewizz2  28 points - 1/2/2015
 
can i use a home power supply? a 6a 12v ac dc converter.
 NewToHobbyKing 14819 points
Gewizz2 this charger requires a external power supply. So you need a DC Power Supply that is in the Range of 11v to (No More Than) 18v. (I plugged a 19v DC power supply and the LCD said "Error Input Voltage"). The MANUAL says "AC to DC adaptor (DC11.0~18.0V/5A)". But I have used a 12V 1A supply with no issue. (As long as I keep the charge Amps to below 1A).
 JOSH 16 points
The best to use is a 12 volt battery.
Patrik  9 points - 12/6/2014
 
My charger says "Input vol Err" But i have selected the correct voltage and mAh. It´*s like that on both the two batteries i have tested. Any ideas?
 Patrik 9 points
Seems it needed a more powerful adaptor with more mAh, the first one i used was 1500 mAh which was not enough apparently?
 NewToHobbyKing 14819 points
Pat I have used a 12V 1A supply with no issue. (As long as I keep the charge Amps to below 1A). I only got the "Input vol Err" when I used a supply that was 19v.
Patrik  9 points - 9/25/2014
 
Which cables are included with this charger, the ones up in the right corner of the picture or?
 Matthias 10 points
The included wires are useless in my opinion. I did soler my own cables, and I do recommend that to anybody else...
 JOSH 16 points
Buy a charger lead from ************ or a amain website or go to your local hobby shop.
Customer Reviews
Create an account
Overall Rating
giampiero
48 likes
ValueUNRATED
QualityUNRATED
Like it?
ottimo prezzo consigliato


1 comment. Reply..

Overall Rating
raposao
314 likes
ValueUNRATED
QualityUNRATED
Like it?
Comprei este carregador mas veio com defeito.
Ele só escreve ( REVERSE POLARITY ) e não sai desta tela mesmo sem baterias conectadas.
Alguem esta com este mesmo problema?

Google translator:

I bought this charger but it came defective.
He only writes (REVERSE POLARITY) and this screen does not come out even without batteries connected.
Someone is with this same problem?


6 comments. Reply..

Create an account
Overall Rating

156 likes
ValueUNRATED
QualityUNRATED
Like it?
working as a charger... diffrent between orignal imax and fake: button ok but ori is better to press sound not as sharp as ori and a little bit shatter sound connector only for car battery to imax and imax to lipo (xt connector) connector for stater of nitro engine (not included) connector for 2 cell (not included) connector for tx lipo/nicd (notincluded)


No comments. Reply..

Create an account
Overall Rating
sefefra
286 likes
Value
Quality
Like it?
no encuentro diferencia con el original


5 comments. Reply..

Overall Rating
unleaded
308 likes
Value
Quality
Like it?
had mine for 5 months now and it is a great charger have used on both home charge and field charge (connected to car) and had no problems balencer also very accurate


No comments. Reply..

.....click here to see all reviews
Aff. Link