USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Radios & Receivers > Complete systems
> Radios & Receivers > 2.4Ghz Futaba
> Radios & Receivers > 2.4Ghz FrSky ACCST

  RATED:

FrSky DF 2.4Ghz Combo Pack for Futaba w/ Module & RX

FrSky DF 2.4Ghz Combo Pack for Futaba w/ Module & RX
FrSky DF 2.4Ghz Combo Pack for Futaba w/ Module & RX

FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again!

New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times per second in the 2.4GHz band. This means that the system is completely resistant to interference in that band.

The Two-way Radio System developed by FrSky provides an additional return link that would be used for monitoring the Rx’s voltage, temperature, location, speed and so on.

Features:
Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility.
Easy to bind and very fast link-up.
Excellent reboot time.
True Diversity with two antennas.
All channels can be programmed with Failsafe, quickly and easily.
Quick and extremely stable in performance.
Precise and smooth servo response.
Extended range (1.5km-2.5km).

V8FT:
Futaba: 3PM, 3PK, 7U, 8U, 9C, 10C, 9Z, FN-Series, T10C, FC-18, FC-28.
Hitec: Optic 6, Eclipse 7, Prism 7 
WFLY: WFT09, WFT-08
 
Receiver Specification:
Operating voltage: 3.5~10.0V
Power consumption: 100mA
Resolution: 3072
Latency: 22ms
Analog voltage: 0~3.3V
Number of channels: 8
Range: 1.5km-2.5km
Dimensions: 55 x 25 x 14 mm
Weight: 12.4g
Version: 2.0
 
Module specification:
Operating voltage: 6.0V-13.0V (can handle 3S!)
Power consumption: 50mA
Output Power:: 60mW
Resolution: 3072 (11bit)
Dimensions: 58.5x37.5x22mm
Version: 2.0

Included:

1 x 8-channel transmitter module DFT
1 x Transmitter Antenna
1 x 8-channel receiver D8R-II PLUS


PRODUCT ID: DFT


Weight: 175g Quantity: 
stock
10+
Price$47.99


acc.
  • 2.4Ghz 7DB Antenna for FrSky Modules (And compatible Radios/Modules)

    Combo Price: $5.51   IN STOCK

  • FrSky USB Cable

    Combo Price: $8.29   IN STOCK



Further discounts available for registered & logged-in customers.
 Customer rated
596
crowns
  
 
Total of 192 discussions.
Fg Dude  28 points - 4/9/2014
 
Yes, thats the most common question ask, I hope they send me a mail if it comes on stock again.
DeeJayKerem  181 points - 4/9/2014
 
When will be in stock again?
Roberto  1 points - 3/23/2014
 
Works on Turnigy 9x?
 Dbtchrman 2309 points
Yes in did! you need to install the correct module! that by the way is for sale here! Internal or external, your choice
 Dbtchrman 2309 points
please consider to award best answer if this answer your inquiries
Morgan  6 points - 3/19/2014
 
Thanks Dbtchrman. For sure the other way would be to have the no-case module, Signal point would be the accessible on the "studient/learning" connectors. But I was not able to find it around. I wanted to have this cased TX module, as operation will be a siimple one: un-plug the old 72MHz, put the new 2.4 on back into place. Just to be sure before going in for this cased-module: the 72MHZ RF module have an 8 all-in-line femelle connector whereas male pins are on the TX case. Then what kind of connector does have the FrSky TX module. If this is not the case, what is the module pins' affectation? Thanks.
 Dbtchrman 2309 points
Well if you for some reason happen to reverse the voltage you will literally fry the module. But let use not worry about that, here you can find the normal working pin out of the module, for the futaba 9Z, and the FrSky module perhaps you can find out at least the the power and ground match, in that way you can make sure that you don't fry your module. www.link
 Dbtchrman 2309 points
or at least you can just turn around and "Google Futaba 9Z pinout " and look for the diagram.
 Dbtchrman 2309 points
please consider to award best answer if this answer your inquiries
 Dbtchrman 2309 points
Sorry for the stupid remark! I'm going around looking for people that I answer and didn't get no one else to help them! "Apologies"
Morgan  6 points - 3/18/2014
 
Hi, I'm looking to upgrade an old but pleasant Robbe Promars FMSS to 2.4 GHz. Could you tell me if this set (TX RX) is compatible or not with this good old girl? Cheers.
 Dbtchrman 2309 points
Well I use this combo on my Futaba 9Z and it literally work like a charm, I'm not sure that the pins work on and under the same sequence, if you have any kind of doubts. I'll say that your best bet is to buy the module with out the case! That by the way they sell it here, and you can install the module internally! making sure that you can put the power and and signal correctly so you don't finish loosing your money and your radio! Good luck.
BEST ANSWER CREDIT AWARDED
Customer Reviews
Review Blogs for this item
FrSky Telemetry Module in the Hitec Aurora 9
wwmilan
please help
Overall Rating
wwmilan
616 likes
ValueUNRATED
QualityUNRATED
4 thumbs up!
I purchase this Unit to put then in my Hitec Aurora 9 (doing some modification obviously) and it is working perfect, to get this install I did not even need to open the Aurora it was so simple that I could not believed. I been using the JR FrSky (normal w/o telemetry) on my Turnigy 9X also and is been reliable also. Very happy with this module. Highly recommended.


6 comments. Reply..

Create an account
Overall Rating
gaekay
218 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
excellent achat de tres bonne manufacture.. vraiment facile d'utilisation bien que sans notice papier! premier achat en 2,4Ghz et vraiment satisfait


2 comments. Reply..

Overall Rating
Customer
67 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
Everything seems to work perfectly in my Hitec Optic. Remounting the antenna making it point upwards was a simple task.

Rumours said that the beta version of FrSky couldn't handle cold weather (had problems at -1C/30,2F, but this one works fine in -19C/-2.2F

Works with both telemetry and non-telemetry receivers, but you will have to change some tiny fragile switches on the module each time. It's better to go all telemetry or non-telemetry.


5 comments. Reply..

Overall Rating
hubcap
20 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
hi what an i doing wrong ,cant get it to bind,read the instruction 10 times still wont bind,after switching receiver back on it only has red light on not green,do you plug battery into ch 8,no battery id on case ,this is v2


1 comment. Reply..

Overall Rating
sebip
35 likes
ValueUNRATED
QualityUNRATED
1 thumbs up!
Frsky telemetry 8ch distance on ground test, on futaba 9c
The tx was cca 40m above rx points.
At 5.37 km distance the bind was working 100pcnt www.link


4 comments. Reply..

.....click here to see all reviews
Aff. Link