Turnigy 1258TG Digital Titanium Gear Servo 57g/13.5kg/.10sec

Total of 14 discussions.

Marcel

6 points - 5/13/2013

splain is the splain of this servo JR type i want to use it as rudder servo and put hk rad arm on it

abpst11

2 points - 4/13/2013

Will i need a glitch buster with this servo in a 1/10 short course truck. I have a 6V BEC 2a. I know i needed one in my 1/10 buggy with the Savox 1258

abpst11

2 points

To answer my question, Yes, just like the savox, this servo needs a lot of power. Very fast servo, though

mc399

3 points - 3/15/2013

I was stating that the mounting holes are pretty much standard. Same as any other standees servo mounting holes. I have now purchased 3 of these servos all from the USA warehouse. There great servos. Equal to my savox 1258. Uses a futaba horn just like the savox as well! For the money u can't beat the quality.

mc399

3 points - 3/13/2013

this is a standard servo. the mounting holes are the same as any other standard servo

celsoborella

21 points

friend rather standard for all servants 56g

Obertoni

25 points - 2/19/2013

Will this Servo fits on KDS Inova 550 at Swashplate. N680 are a little bit longer in the description on KDS Website, i think. Are the mounting holes at the correct place?

celsoborella

21 points

yes friend serves 550 t rex t rex 600 550 600 kds

BEST ANSWER CREDIT AWARDED

Adam

41 points - 2/9/2013

whats the horn count? 25?

MadBiker

15 points

Yes it's a 25t like futaba.

Rick

1 points - 1/24/2013

Hi guys, what device do you use to test or program this servo ? I am planning to purchase 3 of these servos to be use as cyclic ( Turnigy 1258TG ) and a rudder servo ( Turnigy 1256TG will be use with Turnigy GR302-AD gyro, is this a good combo ) for my HK600gt project. Can this device be use with any servos ? And is it a must have device and why ? Please educate me on this, I am still new to this hobby ( been in it for a year now and Loving it ). Thanks in advance. Rick

Patrick

2 points - 1/21/2013

Is there any way to program these servos? They're great, but actually (believe it or not) too fast for my application.

Bubu38

33 points - 1/19/2013

Hi! Do these servos match with flybarless systems?

Weppies

3 points - 12/17/2012

I am going to put these servos on a HK550, what is the best power management setup? Which UBEC would work best or do you recommend connecting the receiver directly from the ESC (Turnigy dlux 100A)?

Bluescreen

2 points - 8/10/2012

Wich Frequency and center position? Same like Savox 1258TG (250Hz / 1520us)?

jean-bernard

13 points

hello turnigy 1258 run with 250 or 333 hz allways 1520us

derek

5 points - 1/20/2012

Can this be used on an unregulated a123 like the ds-120 servo?

Wish_Mastera

17 points

This servo is not rated for high voltage. Probably will handle it but there is no point to risk. Specifications on 6v are good enough.

fluffy11

134 points

yes, I have been running it with a 2cell 123 no problems I have 25 fights on it so far, but will work just as good at 6volt. hope this helps

PT-153

6 points - 1/6/2012

Can I use this servos in a airmodel with dle30 or it is only to heli?

H-KING_SCOTT

5161 points

It should be fine in an aircraft.

HenryPel

48 points - 11/29/2011

Waht servo arms will fit on these => Futaba??

mrblobby

169 points

Yes, Futaba will fit perfectly.

Pedro

3 points

Are this 12 bit servos as the Savox 1258TG…*?

Customer Reviews

Overall Rating		Wish_Mastera 9 likes
Value
Quality

Like it?

I'm using this servo from 2 weeks and I'm disappointed. Speed is good, torque it enough at 5.7v. I mounted it on my 1/8 truggy and everything is looking good, except 1 thing. When I turn fast left-right-left-right the fan of the ESC almost stops. LED of the receiver also glows much lower. There is no difference if servo is tested with loaod or not. At end position of the servo horn happens the same. I though its from very big current consumption, but there is no difference whe using 5A external BEC. Other thing in hand is that this servo goes hot. I'm not sure if there is a problem with my servo, or it "normal" for this model, but I dont like it.

6 comments. Reply..

Overall Rating		cyberbug001 2 likes
Value
Quality

Like it?

I've been using this servo running 6V on my 7HV for about 20 flights with mild 3D and so far, it's been excellent!...Centering, torque and speed is excellent. This is the best cheaper Servos I've used and I highly recommend it. How long will it last?...Time can only tell, but o far it's excellent!

1 comment. Reply..

Overall Rating		Methos 5 likes
Value
Quality

Like it?

Got 2 of these yesterday, and tested them in my widened Turnigy Trailblazer www.link The servos are FAST, have great torque, perfect centering and turn the tires on my truck with absolute ease! They do have titanium gears and should hold up well.

No comments. Reply..

Overall Rating		guigsy 16 likes
Value
Quality

Like it?

Very fast Servo. Has enough torque for a 1/8 EBuggy. I am using it in a LRP S8 bxe since one month. Not having any issues until now.

No comments. Reply..

Overall Rating		guigsy 16 likes
Value
Quality

Like it?

I am using the servo now since 4 months in a LRP S8 bxe and now in an Asso B4.1 as a steering servo. Great product. Very fast, precise and strong enough for a buggy. I would not recommend it in a Truggy as 13 kg is not enough torque.

No comments. Reply..

.....click here to see all reviews