MEGA-ADAPTER. Connect almost anything to anything!

 Santhosh_r 267 points

To make HK consider your suggestion try posting it at HK forum or support.

 Ben Presten 16 points

they were garbage on mine I just cut it up and used it for the connectors

 ArduinoFlyer 29 points

They probably need to use a PCB to keep everything neat and then shrink wrap it with that amount of wires.

 drakred 16 points

The cable is one pics but hobby king dose sell a deans to xt60 cable

 drakred 16 points

Sky : 258000018

 Prouso01 4 points

ok thanks

 RVaitor 1155 points

Yes. It has the TRX plug on it.

 Dukes Of Hazzard 108 points

i have 2 of thowes and they come with the red banana connector but it will be best to sotter on a traxxas female connector

 Discus2a 80 points

Nope, there is no 4mm bullet connector on there. You can find other adapters on HK, like the "T-60 to HXT 4mm Battery Adapter Lead (2pc)".

 Umit 6 points

Nope, there is no 4mm bullet connector on there

 Ktm_lino 3 points

Yes. Plug the battery Hold 5.0 without any problems. Use a lot of time in Batteries 5.0 and 6.0 and never had a problem.

 Discus2a 80 points

Yes, for charging, so you can connect any type of battery to any type of charging lead. Not for use in the RC model it self, it's too large and heavy for most planes.

 Ahsan 98 points

What do you mean by ( Not for use in the RC model it self, it's too large and heavy for most planes.)

 Discus2a 80 points

Well it would work to connect your ESC with your battery, but there are different (smaller, less heavy) adapters for that. This adapter is very suitable if you want to connect your charger with many different kinds of batteries (which have different connectors)! Good luck. Hope this helps

 Jeferson 3 points

Com certeza! aí estão praticamente todas as pontas usadas em lipos! ëclaro que tens que ter também um carregador!

 adubb 22 points

I use it for charging but use different adapters for running.

 Nicolas 8 points

yes you can use this to charge your lipo.

 gerryblue 71 points

It won't fit a Nine Eagle 1S connector. You will have to make an adaptor.

 Capt. Morgan 170 points

I can't buy adapter or charger?? How do I make one??

 SC10RCR 4 points

Well the easy way would be to take a set of deans connectors (both male and female) , and swap them on your existing battery and charger.Or you could swap the connector on the battery to a female deans plug and use a normal lipo charger that comes with a deans connector.Note that most lipo chargers are capable of charging 1 sell batteries.

 Capt. Morgan 170 points

The Nine eagles battery for the Micro Solo Pro is a slide in connector right on the battery itself??

 jurajsun 10 points

super price

 Wahoo 24 points

Sure you can, plug this adapter in XT60 output of your charger and you will get a male tamiya connector.

 David 24 points

This adapter has male and female XT60s, male and female Tamiya, and male and female Deans, so it should connect to either or both of the plugs you said. I personally use Traxxas plugs but I have deans as well, and this charges them both.

 thomvh 46 points

yes it will work

 MARCOS HAIALA 4 points

conceertaza ele ira funicionar , otimo adaptadores

 SC10RCR 4 points

My suggestion,just convert your battleries to deans and buy a new pigtail for your chager that has a male deans connector (as the connector on the battery should be female.)

 Arthur 26 points

backorder means that you can buy it but u will receive only when they receive some units back in stock

 Kobrar 13 points

backorder is when the product is out of stock. You can order it, but your order won't be shipped until it is back in stock

 ccatalin 240 points

It means PAY NOW and when they will have in stock they will send it to you

 timaovr 6 points

nao tem no estoque, vc pagou e qdo chegar sera enviado

 metzik 11 points

pay and when it will be back in stock they will send it

 lilkrazy 18 points

backorder means that you can buy it but u will receive only when they receive some units back in stock. so to make it easier for you it means to pay for it now and get it when they are in stock www.link

 Miguel 4 points

backorder = they don't have this product in stock, so you will received only when they received the product and sent to you!

 hsp25 28 points

it means a long wait most of the time lmao. the eta in never correct

 Einnor 8 points

..just keep logging-in regularly...it's a fast moving items probably bcoz of it's useful characteristics..

 ty 8 points

i have this item and i have used it a few time but it is missing a few adapters it doesn't have all of them.

 maoescobar 25 points

Hello. should be aware of its publication, is sufficient demand and sometimes the action only lasts a day. (Maoescobar)

 Miguel 4 points

keep waiting, sometimes take more time that you think, but you'll received the product!

 ryan100 5 points

Yes it's true, one time it took 4 weeks!

 MADDIVER 180 points

Yes! You can!

 Andras 3 points

If your charger has only 4 mm banana plug to charge the batteries, the answer is no. But, if you have an charger cable, wich you can connect to this multiadapter, then the answer is YES!

 Heikki 3 points

Thx for the reply Andras. Just ordered this item and you just gave me the answer to my question :) I only have to cut the Tamiya connector off and put 4mm bullet cons to it and have my new battery in working order. Btw are the wires 12, 14 or 16 AWG?

 traxxmaster 5 points

yes you can. just try to keep the other plugs away from each other. ive had one short out on me before because i didnt have the covers on and the ruined a charger, a lipo, and the wiring harness

 Sofia 12 points

Sure you can!

 Miguel 4 points

shure! this is perfect to adapt it to charge a battery!

 Daredee 47 points

yes it is )

 Dany7 24 points

si puoi fare tutte le combinazioni possibili ed il cavo è molto spesso 10 awg

 FlyBart 123 points

questo non è completo manca la spina jr per batterie rx

 Jose 23 points

Just be cautious, because one the battery is connect, all exposed terminals are ENERGYZED

 Walter 5 points

ottimo multi connettore, si può utilizzare con tutti gli apparati per la carica/scarica dei pacchi batteria. sopporta alti amperaggi di esercizio

 Grant 3 points

It is a GREAT adapter... You Really can connect anything

 shitHK 4 points

don't know why I bought it...don't need and all charges come with it! Therefore I don't recommend

 Ikarus 99 51 points

Yes you can !

 Arsenio 266 points

Con este producto no tienes que soldar nada, el problema pesa demasiado para usarlo en un modelo es bueno para cargar pero no para usarlo en vuelo.

 snwbrdflyr 20 points

I have this item and use it for testing different E-aircraft combinations as it really can join almost anything. This saves time in testing my aircraft. If it was used in a plane it would be too heavy. In a car it would not only be to bulky but would add uneccesary weight if racing.

 Pedro 6 points

Perfeito - pronto a todo momento!!!! SHOW DE BOLA

 maoescobar 25 points

Es excelente, y por semejante precio no dudes en adquirirlo

 InSynR8 47 points

Yes you could, but you would have a giant dongle hanging near your battery and esc.

 Jeff-Ch 39 points

just to share batttery with friend...
for price very good....

 Edsel 73 points

You can use to run, but I think it is bigger to let into battery case.

 Merrell 7 points

Fo sho!! I've even used it to go male to male and it worked!!

 Turbo442 51 points

You can run this in a plane or car as an adaptor. Really this big dongle would be most likely be used when charging.

 Maxilimiano 6 points

you could make a return payment, it didn't available for months, i guess it's out of stock already

 James 5 points

These are now back in stock.

 Helimaniacos 900 points

is now in stock

 mhavanti 11 points

The charger always has male connectors to fit into the female connectors in your batteries.

 Jacob 6 points

the input connectors are the ones to the left of the cables in the picture

 dklein 25 points

input connectors are also one of just about anything. i.e. most inputs > most outputs All connections tie together in the bundle

 __Raju 2727 points

This has no input connector* it is not actually charging harness. it is basically convertor which allow you to convert any type connector to any type connector, for example if your battery has XT60 connector but your charging plug is Dean (T-Connector) then you can use this MEGA-ADAPTER in between the charging plug and battery.

 gerryblue 71 points

There is no banana connector, so yo can't connect to a charger. Is more for connecting batteries to ESCs.

 Maxilimiano 6 points

You can plugging in it to the correct one of course, between JST-XT, TAMIYA, BANANA, T-PLUG

 rcnewbie 9 points

The connectors on one side will connect to connectors on other side. Such as HXT-60 on one end to Deans on other end.

 FloridaHeli 8 points

I have one of these and just don't find many uses for it. Thought I'd use it a lot but in reality i use it infrequently.

 Tom 4 points

HA HK. When is this item going to be back in stock? I have ordered 2x of these over 2 months ago!

 Compa 36 points

i got it backorderd for nearly 2 months, this thing is RARE

 TurboJimmy 68 points

They are a fantastic bit of kit.

BUT you have to wait for them becouse they are so popular just be paitent its worth it

 Maxilimiano 6 points

It's now backonstock, check it now :)

 James 5 points

These are now back in stock.

 Helimaniacos 900 points

now in stock

 Drax21 54 points

Back in stock Now!

 Axel 4 points

no, take a look at the picture, its only for connecting BIG batteries with known connections

 Fearless Fly 5 points

I have only just ordered it.I'll let you know when it arrives.

 Barney_5 100 points

no just the connectors that are listed

 TurboJimmy 68 points

No it doesn't

 Rupske 31 points

no thre no banana on it, i miss it also.

 __FENZ 20 points

there isn't 1.5mm banana, only 4mm

 Compa 36 points

what you see is what you get dude

 Maxilimiano 6 points

No it doesnt have the JST connector

 rcnewbie 9 points

No,just XT60, Traxxas, Tamiya, EC3 or Deans T-connector.

 sebastian 9 points

you can use it for flying too. but you should take a look that u dont to high with Amperes (think not over 100A). and the Adapter is truly heavy! if u have a small/light weight Plane yout should better solder ur own Adapter for ur needs.

 Barney_5 100 points

you can use it flying (*85 grams its a bit heavy) or for charging or jumping batteries in a parallel circuit

 Fearless Fly 5 points

I wouldn't think it would be too heavy for flight.If it is,you could use the weight to help balance the C of G

 Barney_5 100 points

you can make it lighter by cutting off the ends you dont use just make sure that you insulate them if you do

 TurboJimmy 68 points

It would have to be a large model. It is quite bulky and weighs about 50g.

 nguyentran 21 points

im sure you can use to fly, but it will be heavier. If ur planes are not weight sensitive then i guess its fine

 MrGravity 14 points

I only use it for charging - I recommend you do the same. Your plane connectors should be matched for ESC and Battery plugs. It does add weight and is bulky in a plane.

 Tyler 8 points

its fairly heavy though it can be used in flight

 TheNiceGuy 82 points

It's heavy. No good for flying. And there are no JST connectors on it - the main reason I bought it.

 Compa 36 points

use it as you would but as you said in a plane it maybe heavy and a solo conversion would be better

 Maxilimiano 6 points

it's better to use it with charging, the cable is pretty big

 rcnewbie 9 points

I just use mine for charging, a little heavy to put in most regular sized aircraft. Try to make most connectors alike, saves alot of grief. Try XT-60's from Hobby-King they work great and are not expensive, and easier than most to dis-connect when you need to!!!

 shaun 5 points

would like too know also, it says orders arriving every 2 weeks,but i haven't seen anything arrive for 2 months! how many more months should i wait for my order?? O.o

 Andrew 25 points

It should be in stock right now.

 Tyler 8 points

it is in stock now on december 2

 Tyler 8 points

in stock now december 2

 MechEng 14 points

Thanks for your replies. My order just arrived today. It just took a little over 5 weeks for the item to change from 'backordered' to 'reserved' The items just arrived today (8 weeks total to Canada). I had flagged the item on my e-mail alert so I was aware when they were finally back in stock. I sent the question because it seemed to be taking forever to come back in stock given the estimate on the webpage and wanted to ask HK for a better estimate at the time.

 Fearless Fly 5 points

Hi,mine is on it's way,and it shows there are 10 in stock.

 Compa 36 points

this thingy needs looooong time to come.

 Maxilimiano 6 points

It's now back on stock, buy it now before it's back out of stock again :)

 Drax21 54 points

They are in stock now, I just bought one.

 Andrew 25 points

www.link

 Fearless Fly 5 points

Gee mate,for $4.00 buy one and see for yourself.

 Maxilimiano 6 points

JST - XT, TAMIYA, T-PLUG, BANANA

 Eric1180 2281 points

What's struth ?

 HItchingbar 29 points

Aussie for WOW!?!

 Graham Daniel 497 points

Struth= it'[S truth]

  James 635 points

.

'struth - arabic for: "f*ck me dead."

.

 Eric1180 2281 points

Yup they all come from different manufactures. To bad it's impossible to have a connector work with every battery size. A plug on a 6S 5000mah is way to heavy for a 2s 800mah LOL But like JST for every thing under # and XT60 for every thing above # would be nice. To bad XT60 is the new kid on the block. It's a great connector and i think a lot of people are starting to make the switch.

 nko16 38 points

XT60s are great.. have m on all my packs, even on my 12s 550 system.. works beatifull

 Nickeystar 219 points

guess I'll adopt it to

 Tyler 8 points

i know it is stupid

 Loukatos 66 points

You are right!!! www.link

 Drax21 54 points

Wow yes I see what you mean.

 Eric1180 2281 points

Yah buts thats not a battery used to power a plan... Plus that would be kinda weird having a glow plug connector on something like that. All i fly is glow

 Tyler 8 points

no it isnt

 Eric1180 2281 points

? do you have pictures to back up your claim. Because i really don't believe that a electronics factory would hire some one who was color blind.

 Wheels 299 points

Exactly right Eric, they don't hire color blind people...... also they never ever hire anyone who ever has, or ever will make a mistake. Absolute perfection on absolutely every product is all that is possible. In fact if ever a mistake occured in a chinese electronics factory the universe as we know it would simply pop out of existence with a sound quite similar to plucking your finger out of an empty pop bottle.

Pictures? Give me a break man, I've recieved whole battery packs wired backwards (not from hobbyking) and got a refund without supplying pictures.

 STEPHEN 393 points

Good on ya Wheels!

 the3kid 129 points

There is a male side and a female side of every connector shown. If you look closely you can see that the left side is the female side and the right side is the male connectors. The xt-60's are harder to see and the deans male has a cap over it to prevent shorts. They should have included a cap for the traxxas style male connector. But I see this as a charging cable. Not to run and bash with. To many things that can get caught, create more clutter and if it isn't 100% soldered it might come loose.