USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Hi folks,
I am building a tricopter v2.5. I'm not experienced at all in electronics and soldering, so a friend is helping me.
When i tried connecting this servo to a KK2.0 board and connected the battery, the servo moved to the extreme right side and stayed there.
When arming the board, the motors did respond to throttle stick together but the servo was not responding. From the smell, i realized that it was burnt :(
What could be the reason for this?
Thx
Does anyone know what's the servo's framerate? 'Ordinary' (non digital) servos are manufactured for 50Hz and can work up to 65Hz. Digital, usually, allow higher framerates - up to 333Hz. I'm asking because I would like to use these servos with microbeast (BeastX) and it supports framerates up to 200Hz for cyclics...
thats my plan too that why i pick this digital servo for cyclics! thats a good question, haven't heard of anyone using this as a tail servo with digital gyros to get the real frame rate of this product.. if you have the beastx already you can try it out already, try it with one servo first, just hold the servo and see movements! i dont believe a servo will just burn that fast, you'll feel it buzzing if it the frame rate is not matched!
This servos will work OK at 200Hz, I have this servos working with an Align 3GX that works at 300Hz with no problems. This are great precise and strong servos.
oh, i bought a package of bolts and nuts from our local hobby store, assorted bolts and nuts! you need the same dia but longer 5/8 long! be sure the ELEVATOR servo is mounted outside the frame... not inside as th the manual, the horns and ball links will be exact with the balls on the swash if mounted outside!
digital servos are fast servos, its has very low latency or delay. actually the accuarcy of digtal stepping has wider range than analog, and is non suseptable to interference and noise bcoz its is digital
thanks man also do you know it its normal wen i can hear a slite humming sound wen ther not even moving? i was thinking maybe its coz im testing them and the transmitter is close to reacever?
Futaba plugs can be easily converted in JR plugs. Just grab your side cutters. If you dono your's receiver plug type and to lazy to make a cut - take JR plugs. They fit Futaba and JR.
hey does anyone know if you can set this to ds mode on the hk 401b gyro? i know it says digital servo but i have already fried a so called digital servo on this setting so just seeing if anyones done it and how it worked out cheers.
oi, pode sim este servo é muito bom, eu uso no meu 450 e ele é bem rapido.
hi, yes this can be very good servant, I use on my 450 and it is pretty fast.
sim, a uso na cauda do meu 450 com um gyro turnigy 302 em modo digital, funciona muito bem.
yes, use the tail of my 450 with a Turnigy 302 gyro in digital mode, it works very well.
may Hk450gt pro arrive with 3 of this servos for cyclic, it fits perfectly even for the mounting holes, it should also fit the no pro too!
the quality is good, a bit heavier than other same size servos! must be the weight of the heat sink, feel heavy duty even if it gets a little warm!
i used that for cyclic servo, if you want 1520us 333hz tail servo similar in size, get the DS480MG, its alot faster quiter and is coreless! this tgy375mg servo has power and is good for cyclic loads! DS480 would be better sir!
Will this servo fit my Team Assoisated RC18T if not which servos will fit
Customer Reviews
Overall Rating
truemanbox
20 likes
Value
UNRATED
Quality
UNRATED
Like it?
Hi I'm an Italian modeler and OT enthusiast, I'm serchin' for a real "precision servo" in tiny package... and this little beast seems to fit the bill ! A so nice and accurate looking usually means robust construction and top performance..I've ordered two just to test ) www.link this is a tread I've opened in RC Group ..some interesting pics and video...all hardware come from HC/HK...) Ciao, Luca
1 comment. Reply..
Overall Rating
mes helico
200 likes
Value
UNRATED
Quality
UNRATED
Like it?
Ces petits servo sont exceptionnel,rapide, prcis,trs bien pour un 450 .
Pour les pilotes qui commence la voltige ou un 3D soft !!!
Trs bon rapport qualit prix merci H-K !!!
1 comment. Reply..
Overall Rating
Phelec
19 likes
Value
UNRATED
Quality
UNRATED
Like it?
I bought 5 of these servos for an EPP plane (Ursus). One is faulty. As it happened it was the first one I tried on my Turnigy servo tester just to see what they were like. It was stopping about at 2/3 of it travel and then would return back again while using the auto sweep test on the tester. It was getting hot while operating for 30 seconds. I tested the current. It rose from 250ma to 1,000ma when stopped/jammed. I opened it up and have diagnosed that there is something wrong with the output gear or the other gear that is shared on the output shaft. If the case is left slightly loose it will work. But, hey, I am not trusting it for use. I will look into warranty???
out of this world servo amazing build qualty extreamly sturdy contruction
and so so smooth to operate
i would highly recomend as these are also made in Taiwan and as far as servos go thats wer u want them coming from.
buy it dont worry and if u dont like it after wards i live in ireland and i will be HAPPY to take them of you
No comments. Reply..
Overall Rating
jbx907
182 likes
Value
UNRATED
Quality
UNRATED
Like it?
i got it today, 3 pcs and used a servo tester to check! all servo are good, its alittle heavier than similar size servos... one thing after testing it awhile, zigzag method on the servo tester, it became alittle warm, it must be the heatsink! its alittle noisy coz of metal gears, have seen glitches yet, good centering... i do another followup review when i have installed it! one thing it ferfect on HK450gt pro cyclic! fits perfect!
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
