USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Nice motor this one! Tested it on my F86 Sabre and it has a very nice performance with the 64mm Fan with Carbon tube (note the blades). The speed is fast enough and it climbs on vertical. The efficient looks good too for an edf system. Regards
Hi I'm looking to make my own flying wing I plan on CNC cutting the airfoil from solid foam what weight shouild I keep it under to use this motor?
Cheers
i bought this motor to run on a 30A ESC for my F-14. Motor is rated at 27.5A, so assuming that i dont full throttle it should be ok. After installation i put in a turnigy watt meter, at 6/10 of throttle it was showing 31A which is more than what my esc can handle.My question is if motor is rated at 27.5A it shouldn't draw current greater than what its rated??? im running it on 3s 2200mah, so can anyone shed a light on this plz.
I have been doing tests on these motors. Check the forum for my EDF motor stats post. In my opinion this motor would burn up very quickly on that setup it would even be above the max amps for that esc.
just reviewed the a10 warthog kit and found out that this motor will not fit to the 50mm EDF included in the kit, you will need a 22 size motor to fit on a 50mm edf and this is a 26 size motor. hope it helps... :)
The stock motor of my Art tech eurofighter is toast. Would this be a good replacement? Also, does it come with a "plug" that fits in the rotor? Or how else do I fit the slim shaft in the rotor?
I have a F-18 blue angel EDF. Now it has a 4300 inrunner with a 5 blade fan unit. It's 64mm. Do you think this motor will work and give me more power i'm strugleing to keep the speed on turns. Thanks
Yes this motor will be quite suitable for this plane. I have already replied to your other query about this. I reckommend the 4800 KV version but you may have a ***r performance LIPO.
Well, I'm baffled.
All good reviews, and I apparently get a defective motor???
Set up to test on a 64mm, 5 blade edf. 40A esc, 30C 3s Rhino 2150mah battery.
Motor burnt out at 27A, 315 watts.
Thanks for nothing??
I have a PZ Habu that's motor went south. If I run this one on 3S it should spin the Habus fan close to the same as the stock lower KV motor at 4S correct? I know it will draw more amps etc. but my math is correct right?
used this to beef up my maxjet f-35's stock motor. nice motor well made and a nice jump in power and speed. its a 64mm 6 blade edf no problem for this motor on a 40 amp esc
mon jetiger a ador, un excellent remplaant pour le moteur d'origine
2 comments. Reply..
Overall Rating
____FX
6 likes
Value
UNRATED
Quality
UNRATED
Like it?
very good product for edf 64mm on my f16 jet. It produced close to 600g of thrust. good work hobbyking. I recomend
No comments. Reply..
Overall Rating
classic EP
5 likes
Value
UNRATED
Quality
UNRATED
Like it?
I'm currantly running this motor in the fly cat model in the supplied 54mm edf. The model preforms well although this set up is a power hungary deal and fly times on a 1500mah battery are limited to around 3 minutes. I'm about to try the zippy 1800mah battery as suggested for the model, hopefully looking at 8 min flights. all in all I'm happy with the motor, the price was great, and delivery time was impessinly short arriving in Australia within a week of ordering.
No comments. Reply..
Overall Rating
rockape51
4 likes
Value
UNRATED
Quality
UNRATED
Like it?
Excellent motor bought to upgrade the Mini F16 with a Wemotech microfan. Motor mounts perfectly in edf unit.
3 stars as it is advertised as shipping with both 2.3 and 3.0mm shafts. It has arrived with only the 3.0mm shaft and now I have to go searching for a 3.0mm adaptor for the microfan....very, very, very, very, very annoying and inconvenient may i say. If i had known only the 3.0mm shaft would arrive I would have purchased the EDF unit with the 3.0mm adaptor!
Akin to false advertising - if you advertise that the motor comes with both shaft sizes - SHIP IT WITH BOTH SHAFT SIZES!!!!!!!!!!!!!!
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
.jpg){kind=small}
