HK450 CCPM 3D Helicopter Kit (Align T-rex Compat.) Ver. 2
HK-450 CCPM 3D Electric Helicopter Kit (Align T-rex Compatible) Modeled on the famous and proven Align T-Rex 450. 90% parts are compatible with the Align T-Rex 450. This is a very popular helicopter for sport or 3D flying and with huge parts availability and a low price. Its an extremely good heli to learn new maneuvers or improve your skills. V2 heli includes 4mm feathering shaft, updated components AND more alloy!
Spec. Length:660mm Height:230mm Main Blade Length:325mm Main Rotor Diameter:700mm Tail Rotor Diameter:150mm Motor Pinion Gear:12T/13T (Not included) Main Drive Gear:150T Autorotation Tail Drive Gear:106T Tail Drive Gear:25T Weight(w/o blade):450g Flying Weight:730~760g Upgraded belt pulley gear & shaft. (No-slippage)
Required items. Brushless Outrunner Motor Servos, Gyro, Receiver and ESC Lipoly Battery (2200mAh 3S)
We have plenty of spare parts in stock for this machine.
WARNING: if you live in canada DO NOT use DHL cost of HELI: $28 cost of shipping $26 DHL will then charge you a EXTRA $22 before they will deliver. So it cost me $66 because i payed $3 extra for DHL shipping NOT HOBBYKINGS fault I have never before paid anything extra from HK useing other shipping options
Are the Tail Boom Braces too long? Mine go way back, only 55 mm from the tail assembly.
The boom braces, from center hole to center hole are 280 mm long. In the picture above it looks like there about 2/3 back. Mine just seem very long. While I'm at it, the plastic stabilizer mount you fasten the booms to is loose, even after tightening the screws, that will be the first thing I replace.
ok, maybe i was unlucky but the tail boom needed to be cut to fit the tail rotor housing (see forum topic 'belt too short??'), also the screws are way too soft, i rounded off two screws and i was CAREFUL. The main gear was very slightly bent so i've replaced this with a trex one (i might of gotten away with it but replaced just incase). That being said would i would buy another? MOST DEFINATLEY, considering the price and the fact most of the head is metal. The main shaft, head and swashplate assembly are very smooth and there's no problems with binding. The tail gear pulley is metal and again very smooth. For someone with a bit of experience this heli is a fantastic deal and i suppose for the newbie, prepare to have to 'tinker' with the kit to get it perfect all in all a good buy and sent to the U.K within three days!!, thanks HK
I´ve received it. Everything is precise and works smooth, combination of metal and plastics (plastic parts - probably composite plastic - looks worse than HK450 V1 I think). Included pair of full plastic 325mm blades, looks exactly as Align basic blades. Main frame is the same as V1, but included metal tail shaft gear. Canopy holders are metalic. All parts are tuned to black/grey colors. Good work HobbyKing, this heli is winner for its ratio between price/quality!
what can i say low price good quality i dont do 3d with these but i use them in my 450 scale heli's and they work great i outfitted it with everything from hc and i had everything but the reciever trans for 122 shipped to the states excellent i now own 3 of these great deal hobby king
Pretty nice machine.Build went well except for some slightly misaligned holes in the bottom base plate,being plastic this wasn't really a problem i managed to get the screws in.I also did notice that the metal gear pulley/shaft that drives the belt for the tail rotor is bent a noticeable bit.The head is all metal except for the blade grips themselves,for the price this is definitely worth it i cannot comment on flight performance a sit is not ready.
This kit came in a much smaller box than I 'm used to with other helicopters, but it was packaged really nicely and all was complete. I purchased all the alu parts available with it, which makes it a really nice heli!!