USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
The new number one in performance and price! The new Turnigy Lipoly packs deliver full capacity at the said C rate. You wont find a better deal in Lithium Polymer batteries anywhere!
I would change the connector on your RC to 5.5mm Bullet connectors that HK sells. The stock RC connectors are usually not the best design and can heat up and damage your RC. 5.5mm Bullets are the way to go. Especially for today high amp RC's!!!
as usual they come with 5.5mm Bullet Connectors. But I would change them anyway as the used stock connectors are not of best quality and also soldering is usually not the best either!
I would change the connector on your RC to 5.5mm Bullet connectors that HK sells. The stock RC connectors are usually not the best design and can heat up and damage your RC. 5.5mm Bullets are the way to go. Especially for today high amp RC's!!!
but its not only the type of connectors but also the soldering, and thats usually not the best on Hobbyking batteries. Beside that they are great in my opinion. So I'd recommend to everyone at least to resolder the stock 5.5mm connectors on the batteries!
Pessoal meu esc suporta ate 190A de Burst. ainda tenho duvidas quanto a descarga da bateria para o ESC.
Exemplo: 5000mA * 50C = 250.000mA
Pergunta: Posso usar normalmente esta bateira, pois o ESC somente ira consumir até* 190A ou ele nao ira suportar esta Corrente?
The thickness of the wires are very problematic when soldering to deans. I feel the wires on these are way overkill.
If your drawing enough amps to melt a deans, you'll be melting other things also.
yes you will have to. Just make sure you load/charge it with the right charger and if possible balance them on 1st lode/charge its best if you balance them
Lipo packs NEVER come to you charged. ALWAYS balance charge lipo batteries to extend their life. Lipos can be charged with out balancing, but like i said i balance charge EVERY time to extend the life period of the packs. Each cell should be right around 3.85-3.87 when you recieve them. NEVER discharge a lipo battery below 3.2v per cell.
the best thing to do is order it. you can always cancel a back ordered item. I ordered a charger on 5/18/2011 (back ordered) and it showed up today 5/25/2011.
no, the manufacturers are different, therefore different batteries, do not mix them up if thats what you are trying to do, also Turnigy provides a lot more punch, I have both , thumbs up for Turnigy!
Fits nicely into 1:10 PE Slash 4x4. A bit of dremeling and the wires are not a problem. Make sure to sand and round off your cuts to prevent wire rub! I have added some 10mm shrink tube around the base of the wires for added protection! You cannot beat the price. Two batteries with a bit of velcro between fit well with the expanded Traxxas battery strap.
Very, very Powerful! Have it on my FLM E-Maxx 3905 which is a heavy Beast who need a max of punch!!! One of the Best 40c you can buy for this unbeatable price and this will not be my last purchase of Turnigy products! All details are 100pcnt right, 8AWG wires & 5mm connectors: nothing to say!!! -> Achetez sans souci: vous ne serez pas du et pour ce prix vous ne trouverez rien d'quivalent! Toutes les donnes sont exactes, les cbles en 8AWG & connecteurs de 5mm de diamtre (comme les cbles), rien redire!!! -> Die beste Lipo die ich bisher gefunden habe!!! Alle Daten sind richtig )
No comments. Reply..
Overall Rating
Customer
40 likes
Value
UNRATED
Quality
UNRATED
3 thumbs up!
Shipping sucks!!! Mine have been in processing for a week now. What happened to shipped within 48hrs???? They told me I need to be patient. I didn't know it took a week to put some lipos in a box. I am not impressed!!!!
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg){kind=small}
