GPS-6 Micro Brushed power system combo

 Arun 130 points

The maximum thrust is 18-20gms only with these... go for a brusgless setup for that much thrust for a micro plane..

 Arun 130 points

7mm motor mount..

 marinus 35 points

I think this one will work: PRODUCT ID: 9210000001 (300mah) But you would better solder a pico plug to it, you'll have more choise if you do that (that's what I did) PRODUCT ID: PICMX6

 Arun 130 points

micro jst will go fine..

 Victorvs 952 points

yea merge bine GWS 4025

 flyingflea 2 points

DN power batteries are very powerfull and will run the motor for a long tine

 KKArioKA 163 points

Hi colibri ! (from BR ? i am) You need a TX/RX set* you can get the cheapest 6ch or 4ch from hobby king brand and you are good to go. As in for servos, you need to dimension them according to the size of your project if you buy this combo, you cant use regular servos, you will have to use sub mini/micro ones. for battery charger also you need to find out what type of batteries you are planning to charge, if its up to 3 cell (11.1V) you are good with 50W 5A charger, but if you plan on bigger and heavier batteries you will need to invest on a heavier charger too. I just bought "THE WHOLE HOBBY KING SHOP" (im starting 2 planes) so i have lots of discount codes for the same products i got, INCLUDING a RADIO SYSTEM 6CH. add me on msn: rsvaiter*hotmail**** good shopping !

 Laramie 1 points

Quiubole, colibri!I seem to remember seeing that you already have a 4Ch Tx & Rx, you should be able to use your Tx with a mini-micro Rx HK has.they (HK) have good micro servoes too. like the 3.7Grm. ones. look at the "Corona" line of mini Tx's. As for the batteries & charger, I have an "Imax B8" but an ImaxB6 wounl be good too, I can recomend those chargers, that's what I use.I have tunigy batteries, they're great, & the balance connectors fit these chargers. Ell, that's my 2 cents worth, Laramie.

 UltraMicro 37 points

I bought this and am using the HK-micro 1.7g servo.

 F100CUFFLINK 886 points

ithink you have to use the micro / mini receiver

 mig.21 100 points

You can use the new HK DSM2 Micro Rx, they use the same plug. The plug is in both a molex 1.25. It will not fit in 2.4 Spectrum equipment. target=_blank>

 HERBERT W. 7 points

mig.21 - What do you mean by "The plug is in both a molex 1.25"? Did you have another example to include, or saying you have two molex 1.25 and the Rx in both used the same plug?

 mig.21 100 points

The rx and the esc have the same molex 1.25 plug.

 Aaron 2 points

I am trying to use this set up with the Orange Rx R415 dsm2 rx.. Rx requires -, , signal. I've noticed that the image above is not the same wiring as on mine. The image above shows Left to Right as [black-, red , signal] I have from left to right [red , black-, signal]. The RX wont bind and will overheat. ultramicro servos let out their magic smoke too.. be careful!

 macwarrior 36 points

same here ** those would be perfect for ultra-micro planes and helicopters using cell phone vibration motors. Can you buy those separately? HK ** make them available for sale? :P

 beyond limits 18 points

Open any product and chage the last digits on the address bar in your browser to 11885 (product=11885) and you will see the esc stand alone. Its on back order right now.

 beyond limits 18 points

Ok. The Brushed esc cost is 9.23. Why would one not buy this "Micro J3 Indoor Profile (ARF)" for 15.99 alongwith a GPS6 combo and he frame?? I bought two of them just for the motor esc :)

 Graham Daniel 495 points

Perhaps this product was only included in the catalogue to make the brushless motor and brushless ESC combinations look a lot better.

 beyond limits 18 points

Yeh right. Heres a deal for those of you who want a price on me. From me ok. Buy the Micro J3 indoor profile. You get this same setup for 5 bucks lesser.... and "I" will throw in an airframe absolutely FREE!! lol

HOBBY KING - Whats going on?

 Evan 1 points

Looks like it may be a good solution for a blade cp or cp pro tail rudder.

 colibri 4 points

Hi, i´*m new on rc, i use to build rubber FF models and want to jump to this,, so i´*m planing to buy one of these, but my question, what else i need to build a rc model, what tx, rx, sevos, batery and batery charger, preferent to buy here, thanks