The 1/18 Scale 4WD RTR On-Road Drift Car makes racing easy to get into for anyone. With great features such as a 4WD transmission, oil-filled shocks and fully adjustable suspension, this car is ready for the track!
This car is completely ready to run with the included 2.4gHz radio system pre-installed, motor/esc and 1100mah NIMH battery pack w/charger. All that is needed is to charge the battery and your ready to hit the drift course!
Features: -Full time 4WD system -Oil filled shocks -Fully adjustable independent suspension -2.4gHz radio system -Battery/charger included
The 1/18 Scale 4WD RTR On-Road Drift Car makes racing easy to get into for anyone. With great features such as a 4WD transmission, oil-filled shocks and fully adjustable suspension, this car is ready for the track!
This car is completely ready to run with the included 2.4gHz radio system pre-installed, motor/esc and 1100mah NIMH battery pack w/charger. All that is needed is to charge the battery and your ready to hit the drift course!
Features: -Full time 4WD system -Oil filled shocks -Fully adjustable independent suspension -2.4gHz radio system -Battery/charger included
The Zlin-Z50 is a top quality and highly capable aerobatic model that is exceptionally scale, designed to accept either glow or electric power, the Zlin is the perfect club size model, easy to transport and field assemble, yet large enough to have real presense in the air and on the ground.
The first thing that strikes you on inspection is the superb build quality, the Zlin has been exceptionally well designed & built, it offers a very low flying weight with no compromise given to durability, for instance, the vertical stabilizer has been made from glassfiber to withstand the strain imposed by the sizable elevators, even when pushed through the most punishing aerobatic maneuvers. The other thing that stands out is the scale look of the Zlin, models of this class are often slab sided with little attention to detail, but not the Zlin. The covering is superb as is the paint finish on the cowl, the 1 pc wing is bolt on for easy transport and the supplied hardware 1st class. Other indications of the sheer quality of this kit are the proper canopy hatch, the supplied instrument panel and the scale struts for the horizontal stabilizer.
Through a combination of light weight, generous control surfaces, exceptional build quality and great design, the Zlin performs every inch as good as it looks. A highly scale aerobatic model of this quality and class is a rare thing and all of the combined features of this great looking Zlin at this price are unheard of ........until now!
Features: Exceptional build quality and covering Nicely detailed scale model Excellent aerobatic performance Removable wing for easy transportation Quality hardware supplied Robust wide track undercarriage for excellent ground handling Glassfibre vertical stabilizer Designed for glow or electric power Pull/pull rudder and ball linked control rods
Requires: Your own 4~6 Channel TX/RX 4~5 standard Servos 50mm Brushless Outrunner Motor or 0.70 glow engine 3300mAh~4500 5s Lipoly Battery 70mm Spinner 60A ESC RX Battery or UBEC
This superbly detailed Micro F4U Corsair is made from tough EPO foam and is very scale given its tiny dimensions.
Being Ready to Fly, this "Bent Winged Bird" can be assembled in minutes, the motor, ESC & servos are all pre-installed, the pre-installed reciever is pre-bound to the included 4 channel 2.4ghz Transmitter, the tail-feathers, very scale under-carriage and prop are also pre-fitted and decals pre-applied, leaving you to just attach the wing, pop some AA batteries into the transmitter, charge the included Lipoly using the included balance charger and go flying!
Control is full 4 channel and there is a servo for each control surface for precise control, there is also plenty of power from the brushless outrunner motor, which swings a very scale 3 blade prop. This amazingly scale little Corsair looks great both on the ground and in the air and is a must for your warbird collection!
Zippy Compact, the latest addition to our Zippy battery series offers excellent performance and high quality in a "Compact" size. These packs provide the same capacity and discharge rate as our Flightmax line, but give you alternative sizes for applications that require a specific shape.
Great for models with limited battery compartment space!
Zippy batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!
The 1/18 Scale 4WD RTR Racing Buggy makes off road racing easy to get into for anyone. With great features such as a 4WD transmission, oil-filled shocks and fully adjustable suspension, this buggy is ready for the track!
This buggy is completely ready to run with the included 2.4gHz radio system pre-installed, motor/esc and 1100mah NIMH battery pack w/charger. All that is needed is to charge the battery and your ready to hit the dirt!
Features: -Full time 4WD system -Oil filled shocks -Fully adjustable independent suspension -2.4gHz radio system -Battery/charger included
The 1/18 4WD RTR Short Course Truck makes off road racing easy to get into for anyone. With great features such as a 4WD transmission, oil-filled shocks and fully adjustable suspension, this truck is ready for the track!
This truck is completely ready to run with the included 2.4gHz radio system pre-installed, motor/esc and 1100mah NIMH battery pack w/charger. All that is needed is to charge the battery and your ready to hit the dirt!
Features: -Full time 4WD system -Oil filled shocks -Fully adjustable independent suspension -2.4gHz radio system -Battery/charger included
Zippy Compact, the latest addition to our Zippy battery series offers excellent performance and high quality in a "Compact" size. These packs provide the same capacity and discharge rate as our Flightmax line, but give you alternative sizes for applications that require a specific shape.
Great for models with limited battery compartment space!
Zippy batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!
Zippy Compact, the latest addition to our Zippy battery series offers excellent performance and high quality in a "Compact" size. These packs provide the same capacity and discharge rate as our Flightmax line, but give you alternative sizes for applications that require a specific shape.
Great for models with limited battery compartment space!
Zippy batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!
You are not likely to find a foamy jet any bigger than this! This huge Mig is made from EPO foam and is super detailed, there can be no doubt, this jet is going to look so impressive making fast ''n'' low passes down your flying field!
Included in the kit is a 92mm EDF unit and a full set of scale Oleo legs & fixed gear mounts although it would be simple to convert this model to electric retracts and use the supplied undercarriage legs. Also included is an LED Lighting set, comprehensive hardware kit and waterslide decals for the final touch. The build is going to be fairly involved but straightforward, a full set of instructions are included.
This is a limited stock item, so you only have one chance to buy this huge model at such a low price, when they are gone, they are gone!
Features: Tough EPO foam Huge size Excellent value for money Highly detailed Great flying performance
Requires: Your own 6 channel TX/RX 1600kv Brushless EDF Motor 80A ESC OPTO UBEC 4500mAh 6s Lipoly Battery Retracts with 4mm mount shaft (optional) 9g servo x 8
The Do 335 Pfiel (Arrow) was one of many brilliant German designs that simply came too late in WW2 to make an impact, it was fast enough to be capable of outrunning RAF Tempests in the only recorded engagement of the war by allied fighters, the factory was over-run by US forces in 1945 by which time a mere handfull had been completed.
This brilliantly different and fun model is made from tough EPO foam and features a heavily braced wing, being plug and fly, the twin brushless outrunner motors in a push/pull arrangement, ESC''s and servo''s are all pre-installed, assembly is fast and simple and the wing is removable for easy transportation.
The flight performance of the Do335 is just brilliant, it is suprisingly fast and aerobatic, the noise from the twin motors just adds to the effect. The nosewheel is steerable and the Pfiel has full four channel control, this is a geat performing model of one of WW2''s most fascinating piston engined aircraft, it''s as cheap as chips and flies brilliantly, a must for Parkflier Warbird fans!
Features: Tough EPO construction Ply Spar Wing Full 4 Channel control Unique looks Excellent flight performance Fast and easy to assemble Tons of power from twin push/pull brushless motors
Specs: Wing Span: 935mm Length: 940mm Flying Weight: 740g Motor: 2 x 28mm Brushless Outrunner ESC: 2 x 18A w/BEC Servo: 9g x 4
Zippy Compact, the latest addition to our Zippy battery series offers excellent performance and high quality in a "Compact" size. These packs provide the same capacity and discharge rate as our Flightmax line, but give you alternative sizes for applications that require a specific shape.
Great for models with limited battery compartment space!
Zippy batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!
Zippy Compact, the latest addition to our Zippy battery series offers excellent performance and high quality in a "Compact" size. These packs provide the same capacity and discharge rate as our Flightmax line, but give you alternative sizes for applications that require a specific shape.
Great for models with limited battery compartment space!
Zippy batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!
Zippy Compact, the latest addition to our Zippy battery series offers excellent performance and high quality in a "Compact" size. These packs provide the same capacity and discharge rate as our Flightmax line, but give you alternative sizes for applications that require a specific shape.
Great for models with limited battery compartment space!
Zippy batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!
There is plenty of rad in the RadJet-800! With it''s amazing price, EPO foam and being Bind and Fly, this brilliant model has no trouble earning the RadJet moniker. This version of the Radjet comes complete with a pre-installed 6 channel DSM2 reciever, once assembled, all you have to do is Bind....and fly!
The Radjet 800 has been tested and flown to within an inch of it''s life and it performed flawlessly, not only in terms of light performance but also reliability and believe me, we tried hard to kill the test version! It''s a simple build with the motor, ESC an servo''s pre-installed, even the decals are pre-applied! It has several impressively simple and practical features such as the plastic skid on the length of the underside of the fuselage that will protect your Radjet from the usual tears and gouges, servo arm protectors on the wings, effective cooling for the ESC & Lipoly and so on.....and it''s how much?
But, it doesn''t stop there, oh no! What''s it like to fly? Utterly brilliant! The light flying weight means that the outrunner motor gives tons of performance, the Radjet will pull massive loops and is capable of some pretty precise aerobatics, it''s quick, no doubt about it but throttle back and it becomes a total pussycat, fly it like you stole it or glide around, either way it''s a hoot! So to sum up, it looks great, it''s easy to assemble, flies brilliantly, is reliable, fast and cheap....Radjet? You better believe it!
The Slick 360 is one of the hottest looking aerobatic aircraft around but like all models in this class, looks alone are not enough, so it''s a good thing that the Hobbyking Slick has been designed with one thing in mind, extreme 3D aerobatics!
The quality of this Slick is simply as good as it gets, the airframe has been constructed to keep the flying weight minimal but strong enough to take the punishment of extreme aerobatics, the superb quality covering has been expertly applied and for the final touch, the cowl, canopy and wheel pants are finished in a deep gloss paint. The hardware is excellent & also chosen to keep flying weight to an absolute minimum and of course the model features plug in wing & CF wing tube as you would expect for easy transportation.
The H-King Slick 360 performs every inch as good as it looks, naturaly it makes for a great sport plane but it would be fair to say that hardcore 3D is what the Slick has been designed for. The precision of the airframe, stunning looks, top line quality and amazing feather weight specs make the Slick 360 a must have plane for all aerobatic and 3D pilots!
Features: Amazing looks Top quality construction and covering Easy and fast to build Ultra light weight but strong airframe Superbly applied, high quality covering Full airfoil empenage Excellent colour scheme for easy orientation Stunning 3D capability Quick field assembly, easy to transport
Requires: Your own 4~6 Channel TX/RX 35mm Brushless Outrunner Motor 40A~60A ESC 4 x Digital High Torque 12g servo 2200mAh~2650mAh 4s Lipoly Battery 50mm Spinner UBEC (Optional)
The new number one in performance and price! The new Turnigy Lipoly packs deliver full capacity at the said C rate. You wont find a better deal in Lithium Polymer batteries anywhere!
This lipo is designed for use in 450 class helicopters such as the HK450 PRO, TREX450 PRO, Rave 450, Beam E4 etc...
By running a lower KV motor (around 1700KV), you can achieve longer flight times and extremely high performance (when compared to a standard 3S setup) due to the increased efficiency of a higher voltage setup in your 450 class helicopter!
The new number one in performance and price! The new Turnigy Lipoly packs deliver full capacity at the said C rate. You wont find a better deal in Lithium Polymer batteries anywhere!
This lipo is designed for use in 450 class helicopters such as the HK450 PRO, TREX450 PRO, Rave 450, Beam E4 etc...
By running a lower KV motor (around 1700KV), you can achieve longer flight times and extremely high performance (when compared to a standard 3S setup) due to the increased efficiency of a higher voltage setup in your 450 class helicopter!
The H-King Windragon is great fun for both new and experienced pilots, it is tough and simple yet brilliantly thought out, the Windragon even comes with 2 wings, one with hi-dihedral wingtips & no ailerons which offers super stable, high lift, self correcting tendencies allowing the new RC pilot to master basic three channel control with an easy to fly, fun model. Once confident and ready to move on to full four channel control, it takes seconds to change to the sport wing, which features ailerons and a more sporty airfoil, a brilliant step system to mastering RC flight!
The fuselage is blow molded nylon, with EPO wings and tail-feathers, making the Windragon resistant to all but the very worse crashes. Assembly could not be simpler, the Brushless outrunner motor, ESC and all servo''s are pre-installed, the tail plane simply screws on, the undercarriage is plug in and the wing is secured by crash resistant rubber bands, the Windragon can be assembled in double quick time!
There is no doubt, for a pod ''n'' boom model, the Windragon looks great, designed primarily as a purpose built trainer, it is easy, cheap and simple to assemble and fly. It looks good yet is as tough as old boots, the Windragon is a huge amount of fun, regardless of your flying experience and it won''t break the bank!
Features: Crash resistant blow molded nylon fuselage Tough EPO flying surfaces Carbon Fibre boom Powerful brushless outrunner motor Hinged canopy for security and easy battery access Wing secured with rubber bands for crash resistance Plug in Under-carriage Spare prop and wing bands included 2 wings included, beginner wing & sport wing
Zippy Compact, the latest addition to our Zippy battery series offers excellent performance and high quality in a "Compact" size. These packs provide the same capacity and discharge rate as our Flightmax line, but give you alternative sizes for applications that require a specific shape.
Great for models with limited battery compartment space!
Zippy batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!
Zippy Compact, the latest addition to our Zippy battery series offers excellent performance and high quality in a "Compact" size. These packs provide the same capacity and discharge rate as our Flightmax line, but give you alternative sizes for applications that require a specific shape.
Great for models with limited battery compartment space!
Zippy batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!
The Deamon 2000 is one of a devilishly good range of exclusive Hobbyking Performance gliders that offer you quality, looks and speed at a saintly good price.
The Deamon has a nicely finished composite fuselage and expertly built and covered balsa wings and tailplane. As you would expect, the wing is removable for easy transportation & fast field assembly, also the Deamon uses a V-tail configuration for excellent speed and handling. There is a comprehensive hardware kit supplied and for the final touch, the canopy is carbon fiber.
There is no doubt, the Deamon 2000 has been designed for performance, with the right set up, this model offers excellent speed and the airframe offers superb handling, this is a nice quality ARF model that any RC Pilot would be proud to own, performance was never so affordable!
Features: V-Tail configuration Removable wing for easy transport CF canopy and wing tube Easy build with instructions included Excellent quality Composite fuselage Excellent flight performance
Requires: Your own 4 Channel TX/RX with v-tail mixing 28mm Brushless Inrunner Motor up to 1800kv 4 x 9g servo 1600~1800mAh 3s Lipoly Battery 30mm Folding prop spinner 40A ESC w/BEC
The Specter 1800 is one of a devilishly good range of exclusive Hobbyking Performance gliders that offer you quality, looks and speed at a saintly good price.
The Specter has a nicely finished composite fuselage and expertly built and covered balsa wings and tailplane. As you would expect, the wing is removable for easy transportation & fast field assembly, also the Specter uses a V-tail configuration for excellent speed and handling. There is a comprehensive hardware kit supplied and for the final touch, the canopy is carbon fiber.
There is no doubt, the Specter 1800 has been designed for performance, with the right set up, this model offers excellent speed and the airframe offers superb handling, this is a nice quality ARF model that any RC Pilot would be proud to own, performance was never so affordable!
Features: V-Tail configuration Removable wing for easy transport CF canopy and wing tube Easy build with instructions included Excellent quality Composite fuselage Excellent flight performance
Requires: Your own 4 Channel TX/RX with v-tail mixing 28mm Brushless Inrunner Motor up to 1800kv 4 x 9g servo 1600~1800mAh 3s Lipoly Battery 30mm Folding prop spinner 40A ESC w/BEC
The Wraith 1200 is one of a devilishly good range of exclusive Hobbyking Performance gliders that offer you quality, looks and speed at a saintly good price.
The Wraith has a nicely finished composite fuselage and expertly built and covered balsa wings and tailplane. As you would expect, the wing is removable for easy transportation & fast field assembly, also the Wraith uses a V-tail configuration for excellent speed and handling. There is a comprehensive hardware kit supplied and for the final touch, the canopy is carbon fiber.
There is no doubt, the Wraith has been designed for performance, this is a nice quality ARF model that any RC Pilot would be proud to own, performance was never so affordable!
Features: V-Tail configuration Removable wing for easy transport CF canopy and wing tube Easy build with instructions included Excellent quality Composite fuselage Excellent flight performance
The H-King Darkwing is a huge composite flying wing designed specifically for FPV, with it''s sleek design and menacing lines, this is one fantastic looking model!
The central fuselage section and winglets are made from sturdy fiberglass, while the wing is sheeted, traditional construction balsa for durability. Despite it''s size, the Darkwing is practical with both wings being plug in, this model can be field assembled in minutes and is easy to transport. Being a delta, it is of course a simple 2 servo affair, there is a massive amount of space in under the large canopy for Lipoly''s and FPV equipment, the motor mount is also very substantial, obviously motor choice will depend on payload. The Darkwing has no undercarriage and will require a launch ramp, alternatively, conversion to fixed or even retracting undercarriage will be reasonably simple for the experienced modeller.
The Darkwing will undoubtedly make for a fantastic sport flying model courtesy of it''s efficient and sleek aerodynamic design, but at it''s heart, this is a futuristic looking FPV platform that features a high payload capability and has excellent stall & glide characteristics. The sheer size and menacing lines of the Darkwing will cause jaws to drop wherever you fly, this is one radical looking model that is perfect for the high tech world of FPV.
Features: Amazing high tech look Tough glassfiber fuselage Massive payload capability Easy and fast field assembly Plug in wings for easy transportation Low build cost
Requires: Your own 4 channel TX/RX with delta mixing 42mm Brushless Outrunner motor 60A~80A ESC 2 x Standard size MG servo 3700mAh~5000mAh 4s Lipoly battery FPV Equipment
The Sbach 342 has to be one of, if not THE most popular aerobatic model around, this great size version is perfect for those pilots wanting to build a large Sbach without upsetting the wife and bank manager! Whilst not aimed at the hardcore 3D pilot, this is a very capable aerobatic model that will last for years and provide plenty of thrills for club sport pilots.
Size wise, this model is perfect for the club flyer, the Sbach has tons of presense but is easily transported and assembled at the field. The airframe is a traditional construction and has a balsa sheeted/foam spine and a fiberglass vertical stabilizer for strength, the covering is well applied, the supplied hardware is susprisingly good given the price and the model is really practical with plug in wings and a large canopy secured by screws. The empenage is full airfoil and is also traditionally built with an emphasis on durability without adding excessive tail weight.
There can be no doubt, the ultra-light construction of some 3D ARF''s makes them "one crash" models that can be off-putting to sport pilots, this Sbach 342 offers you a geat size, durable and capable aerobatic model that will give many hours of flying pleasure and has the kind of finish, accuracy and performance that only balsa models can offer!
Features: Good quality traditional balsa construction Comprehensive hardware included Nice size model perfect for club strips Glassfiber vertical stabilizer Fast and simple airfield assembly Sheeted Fuselage with foam for strength Pull/pull rudder Comprehensive lazer cut decal set Round plastic pivot hinges on all control surfaces
The YAK54 includes a large 37 series outrunner and 60A ESC. With a wingspan of 1.5M and an area of 43dm2, it''s a huge 3D Foamie that is sure to impress! The YAK54 includes many quality details such as panel lines and rivets, cockpit & pilot, a twin servo controlled elevator (just like giant scale), big scale servo''s for each aileron and a big powerful prop hanging outrunner. The main wing includes a large carbon spar, and bolts together tightly while being easy to remove for transportation. The tail slots together in 3 pieces with two bolts and epoxy for a much needed extra strong hold. The cowl and engine detail are moulded in foam (no ice-cream container cowl here). You have never seen a foamie model of this size and detail before. It''s HUGE! You will need a 3300mAh 4S pack to fly this model well.
The Hobbyking Alloy EDF series are pre-assembled and dynamically balanced making them simple and easy to fit, no unit assembly is required. As well as high power, these fans have excellent cooling and run so smoothly, the sound is amazing, there is also no housing distortion unlike plastic fans. This nice quality, powerful fan is a great way to upgrade your foamy 64mm jet to a missile in around an hour!
Features: Pre-assembled Factory dynamically balanced High power with superior cooling High quality construction Fully servicable Fast to fit No housing distortion
Specs: Rotor Diameter: 64mm 5 Blade Outer Diameter: 66mm Weight: 145g with 3.5mm Connectors Motor: 2836L Brushless outrunner 4000kv Max RPM: 60,000 Continous Power: 650w Max Power: 850w Max Amps: 43A Max Thrust: 1.06kg Timing: High
The HobbyKing Yak54 30cc Large Scale 3D aircraft is constructed from plywood and Balsa with a fiber glass cowl and tough plastic wheel spats. Finished with attention to detail the model is covered in quality covering film that has been nicely applied.
The airframe has been constructed very much with 3D in mind and is both light, yet strong, the attractive colour scheme is simple and ideal for orientation, the hardware includes heavy duty control horns to cope with the stresses of a high performance aerobatic model and of course the rudder is a pull/pull arrangement.
This model is a stand out performer, we were impressed with the finish and the quality of the hardware pack for a model of this price. Yak''s make for superb scale aerobatic/sport models but make no mistake, this is a 3D model that is capable of torque rolls, yo-yos, harriers and waterfalls without missing a beat!
The Zlin-42 is a Czech built tandem seat trainer that is used for VFR training, basic instrument training and also as a glider tug, the type also saw service with former Eastern Bloc airforces as a trainer. The Zlin-42 was also used as a basic aerobatic trainer and even saw some combat in Sri Lanka!
This is a nicely built and hugely practical, real world, every day sport fly model that will last for years. The robust tricycle under-carriage makes the Zlin 42 easy to handle on the ground and capable of handling almost any strip. The removable 2 pc plug in wing makes for easy transportation and fast field assembly, likewise, the massive canopy offers easy access and also makes the Zlin an ideal candidate for an electric conversion. The hardware is all top notch and includes a fuel tank and engine mount. The covering is first class and the colour scheme ideal for orientation.
The robust but lightweight construction of this model makes for an excellent sport fly model that will turn in a few aerobatic moves when you want it to, yet the generous size, thick wing & light wing loading gives you a model that is equaly happy flown slowly without getting out of shape. This is a nice size, real world sport fly model that can be enjoyed when all the hanger queens are tucked safely away and the fact that it can be built for real world money is a definate bonus!
This superb Turboraven really looks the part and is something quite different from the usual sport models, being built for both glow or electric power, nobody get''s left out!
The construction of this ARF is first class, being both strong and light, the covering is also excellent and has been expertly applied. The glassfiber cowl and wheel pants have a deep gloss paint finish and the comprehensive, quality hardware package compliments the quality of the airframe. The 2 pc plug in wing is ideal for easy transportation and field assembly and mounts onto a CF tube. Rudder is pull/pull for precision and an alloy servo extension is included.
The Turboraven is a high performance aerobatic model and regardless of EP or IC power, this is a model that the RC pilot will never tire of, capable of high speed with the right set up, combined with an excellent aerobatic ability, this is a great looking, practical every-day sport model that will really stand out at your airfield!
Specs: Wingspan: 1580mm Length: 1440mm Flying Weight: 3000g Engine: 0.60 2 stroke or EP equivalent (not included)
Includes: Engine Mount Fuel Tank All hardware Instructions
Requires: Your own 4~6 Channel TX/RX 0.60 Glow Engine or equivalent EP Motor 5 x Standard Size Servo (4 x for EP) RX Battery and/or UBEC 80A ESC (EP) 4000mAh~5000mAh 6s Lipoly Battery (EP) 64mm Spinner
The Hobbyking Alloy EDF series are pre-assembled and dynamically balanced making them simple and easy to fit, no unit assembly is required. As well as high power, these fans have excellent cooling and run so smoothly, the sound is amazing, there is also no housing distortion unlike plastic fans. This high quality, powerful fan is the perect way to convert your foamy 64mm jet from "also ran" to missile in around an hour!
Features: Pre-assembled Factory dynamically balanced High power with superior cooling High quality construction Fully servicable Fast to fit No housing distortion
Specs: Rotor Diameter: 64mm 5 Blade Outer Diameter: 67mm Weight: 176g with 3.5mm Connectors Motor: 28mm Brushless Inrunner 4300kv Max RPM: 52,000 Max Power: 750w Max Amps: 48A Max Thrust: 1.2kg
In air racing terms, there were planes built for going fast, there where planes built for going really fast, then there was the Nemesis. Few can dispute the heart pounding speeds that this tiny single prop aircraft managed to achieve. The star of many shows, the original Nemesis won just about every race it was entered in for its 9 years on the Pylon racing circuit, thus etching its reputation in the hearts and minds of every pylon racer that ever took to the skies.
Exquisitely finished with quality covering film this balsa and ply wood built up model is ready to break records at your flying field. Included in the kit is a full set of top quality hardware, nothing to throw out and replace on this build. Suited to a .60size glow engine or equivalent EP system this model will turn heads and and become a proud conversation topic on the flight line at your local club.
Note: This is a glow engine model, some modelling experiance will be required for an EP conversion. A CD-Rom is included with the model that contains a detailed building guide for a glow setup.
This great looking balsa Spad offers a simple but satisfying build for the WW1 enthusiast, the end result being a sturdy and great flying model of a classic fighter.
The model is well built and nicely covered, all hardware is supplied as are the scale details like the machine guns and exhausts. This great priced model also offers an in-expensive build, which set up with the right motor will have superb slow fly capability coupled with plenty of power on tap for aerobatics when needed. This model has everything to offer the enthusiast, great price, great looks and great performance!
The alloy Dynamic Power Series fans are of the very highest quality. The construction of this ready to fit and fly unit offers a combination of huge power with reliability and efficiency. The unit is factory dynamically balanced resulting in a turbine-like smoothness. This superb EDF is totally Pre-assembled complete with motor, simply fit to your model, set the ESC motor timing to high and tear up the sky!
Specs: EDF Inner Diameter: 120mm Outer Diameter: 125mm Construction: Alloy Weight: 1050g (complete unit with 4mm connectors) Max RPM: 38,000 Motor Type: 4035 4 Pole 980kv Max Power: 5000w Continuous Power: 4800w Max Voltage: 44.4v (12S) Max Amps: 110A Max Thrust: 7kg
The alloy Dynamic Power Series fans are of the very highest quality. The construction of this ready to fit and fly unit offers a combination of huge power with reliability and efficiency. The unit is factory dynamically balanced resulting in a turbine-like smoothness. This superb EDF is totally Pre-assembled complete with motor, simply fit to your model, set the ESC motor timing to high and tear up the sky!
Specs: EDF Rotor Diameter: 86mm Outer Diameter: 94mm Construction: Alloy Weight: 549g (complete unit with 4mm connectors) Max RPM: 45,000 Motor Type: 4074 1300kv Max Power: 3400w Continuous Power: 3000w Max Voltage: 37v (10S) Max Amps: 92A Max Thrust: 4.9kg
The alloy Dynamic Power Series fans are of the very highest quality. The construction of this ready to fit and fly unit offers a combination of huge power with reliability and efficiency. The unit is factory dynamically balanced resulting in a turbine-like smoothness. This superb EDF is totally Pre-assembled complete with motor, simply fit to your model, set the ESC motor timing to high and tear up the sky!
Specs: EDF Rotor Diameter: 86mm Outer Diameter: 94mm Construction: Alloy Weight: 546g (complete unit with 4mm connectors) Max RPM: 43,000 Motor Type: 3674 1280kv Max Power: 2400w Max Voltage: 29.6v (8S) Max Amps: 68A Max Thrust: 3.3kg
The classic lines and proven capability of the Yak 54 combine to make it one of the most popular aerobatic models, the Hobbyking Yak certainly looks the part and make no mistake, 3D flying is what this superb model is all about!
The quality of this Yak 54 is simply as good as it gets, the airframe has been constructed to keep the flying weight minimal but strong enough to take the punishment of extreme aerobatics, the superb quality covering has been expertly applied and for the final touch, the cowl, canopy and wheel pants are finished in a deep gloss paint. The hardware is excellent & also chosen to keep flying weight to an absolute minimum and of course the model features plug in wing & CF wing tube as you would expect for easy transportation.
The H-King Yak 54 performs every inch as good as it looks, naturaly it makes for a great sport plane but it would be fair to say that hardcore 3D is what the Yak has been designed for. The precision of the airframe, stunning looks, top line quality and amazing feather weight specs make the Yak 54 a must have plane for all aerobatic and 3D pilots!
Features: Attractive scheme that is great for orientation Top quality construction and covering Easy and fast to build Ultra light weight but strong airframe Superbly applied, high quality covering Full airfoil empenage Ball link piano wire control rods & pull/pull rudder Stunning 3D capability Quick field assembly, easy to transport
Requires: Your own 4~6 Channel TX/RX 42mm Brushless Outrunner Motor 60A~80A ESC 4 x Digital High Torque Park~Std servo 3300mAh~4500mAh 4s~5s Lipoly Battery 50mm Spinner UBEC
The high performance HK-500GT(TT) is 3D flight ready. 99% of parts are compatible with the Align T-rex 500
Much bigger than it''s smaller 450 brother, the 500GT(TT) is an exciting helicopter to see in action and even more exciting to fly. It''s 2024 alloy head ensures hard core 3D pilots wont be dissapointed in the performance and the beautifully painted cowl and Titanium anodized components make this a visually stunning helicopter with performance to back it up! You wont find unecissary or poorly fitting ''bling'' alloy components on this heli.
All parts are 100% compatible with T-Rex 500 Included are main and tail blades & Carbon Fiber boom supports.
We guarantee you wont find a better priced heli of this quality anywhere!
Features. Light weight design provides awesome flight performance and extreme 3D capability. Rotor head/tail with thrust bearings. Direct-to-swash CCPM linkage. Center of gravity of battery tray designed close to the rotor head. High efficiency Torque-Tube driven tail.
Fully driven tail auto rotation system. Tail servo boom mount. Carbon Fibre boom support rods. High rigidity 2024 alloy main frame.
Specification:
Length: 840mm
Height: 310mm
Main rotor diameter: 970mm
Tail rotor diameter: 200mm
Motor pinion gear: 13T
Main drive gear: 162T
Tail drive gear: 31T
Drive gear ratio: 1:12.46:4.68
Weight(without power system): 1370g
Flying weight: Approx 1700g
Required items. Brushless Outrunner Motor Servos : See linked items below. Radio Gear : Gyro/Rx ESC : 80A or greater. Battery: 2 x 2200mAh 3S 20C or greater.
This great looking and cheap Phantom will take almost no time to assemble, most servos are pre-installed as is the ESC and fan. The F-4 has has an all moving tail, pilot figures and plenty of scale detail, making it amazing value! The Phantom is not only cheap to buy, it is cheap to get airbourne, brilliant fun and a brilliant price!
Features: Great scale look Easy to assemble All moving tail Cheap to get airborne Nosewheel steering Simple to follow instructions Includes glue & tools Inlcudes pilot figures
Specs: Wingspan: 550mm Length: 780mm Weight: 590g EDF Unit: 64mm with brushless outrunner motor ESC: 30A Servos: 4 x 9g
Required: your own 4 channel TX & RX 1300mAh 3s Lipoly battery
So, you want a fast parkflyer!? Forget boring scale details and shelf queen good looks this A-1 Skyraider is built for speed and all out fun! Dog fight with friends on 3S or use a 4S pack for heart pounding high speed passes, either way the Fun fighters have you covered. The combination of the light weight EPO airframe, a high power brushless motor and a simple aileron and elevator setup place these models amongst the most exhilarating park flyers to hit the market this year. Dont be left out of the fun!
This model comes plug and fly and only requires a few minutes of assembly time and flies like its on rails thanks to the one piece molding technique used in the construction. All you will require to have the A-1 Skyraider in the air is a 3~4S 850mAh 20C Lipoly battery and your own transmitter and receiver (Tx/Rx)
The Junkers JU-52, or "Iron Annie" as it was nicknamed was originally developed as an Airliner and transport and served in Germany from 1932 until 1945, unsuprisingly, it was pushed into military service and was even used as a medium bomber for a short period. So succesful was the JU-52 that licence built version''s were still being used as a civil and military carrier right up to the 1980''s. The H-King JU-52 is a model of the Lufthansa operated aircraft regularly seen at airshows around Europe and is painted in the historical 1936 Deutsche Lufthansa scheme.
This superb scale Plug and Fly model is simple to assemble with the motor, ESC and all servo''s pre-fitted. The single motor has more than enough power, the out-board props are just for effect and spin easily, the prop wash from the main motor is enough to spin them up, this configuration was chosen to keep the model simple, light and capable of excellent flight times. The JU-52 is very practical, it features a 2 pc removable wing that is simple to wire up as there isn''t a spiders web of ESC wires to hook up, a steerable tailwheel for excellent ground handling, rubber tyres for durability and most importantly, it is made from tough EPO foam.
The finish on H-King JU-52 is excellent, the full corrugated effect skin adding to it''s scale appearance. Scale flight is what this superb looking model is all about and this is where the Junkers excels, a combination of 4 channel control and light wingloading means this model can be flown slowly but with authority, it is another unique and exclusive model from Hobbyking for the scale enthusiast that will stand out at any flying field!
This superb Micro Fournier is made from tough EPO foam and is a super fast build, the servo''s, motor and ESC are all pre-fitted, decals are pre-applied, even the tail is pre-fitted, to get into the air and flying, you simply bolt on the wing, set up your radio and fly!
There is loads of power from the brushless motor for easy hand-launching and flown WOT, this super scale micro zips along, however, courtesy of the large wing area, the Fournier is quite happy flown slowly, it will even handle a little wind. The Fournier features full 4 channel control and is a great subject for a scale micro model with a difference, the RF-4D is a great park flier!
The Sbach 342 has to be one of, if not THE most popular aerobatic model around, this nicely priced version is perfect for those pilots wanting to build a sport fly Sbach without upsetting the wife and bank manager!
Size wise, this model is perfect for the club flyer, big enough to have some presense but small enough to be easily transported and cheap to build. The airframe is well made and the covering well applied, the supplied hardware is susprisingly good given the price and the model is really practical with plug in wings and a large canopy secured by very strong magnets.
Easy to assemble as well is really cheap to build, this Sbach 342 is a great sport aerobatic model that will give hours of flying pleasure and has the kind of finish and durability that only balsa models can offer!
Features: Good quality traditional balsa construction Comprehensive hardware included Nice size model Cheap to build Fast and simple airfield assembly
Turnigy Full Metal Servoless Retract with Oleo Legs (80 degree - Pair) 1.20 class - High quality servoless retract system for large models, features all metal construction for precision, reliability and durability, also features auto cut off for protection against excessive current draw. Also included are a set of quality Oleo legs and plastic wheels with rubber tyres......finally, a reliable alternative to air & mechanical operated retract systems on larger models!
Pin size: 5mm Wheels: 70mm Weight: 276g Max Model Weight: 7500g Operating Voltage: 4.8v~6v Axle: 4mm
The Centurion Mini Brushless Catamaran Boat is an off-shore racer style boat that is big on features. With its water cooled 30A brushless power system, powerful 17g servo, CNC aluminum alloy rudder, and stainless steel turn fins, this mini race boat is no joke!
Everything is pre-installed including the rudder servo, making this truly an almost ready to run boat. Simply add your own 2ch radio system & 11.1V 2200mAh lipoly battery and your ready to run!
Features: -50km/h Top Speed -B2445 3000KV Water Cooled Brushless motor -30A Water Cooled Brushless ESC w/BEC -Powerful 17g Servo -CNC Aluminum Alloy Rudder -Left & Right Stainless Steel Turn Fins -2 Blade Nylon Propeller -2.3mm Flex Cable Drive System -Plywood Boat Stand
This great looking and cheap Warthog will take almost no time to assemble, all but one servo''s are pre-installed as are the ESC''s, the fans are also pre-installed and simply plug into the ESC''s when attaching the 1pc engine pod, the A-10 is not only cheap to buy, it is cheap to get in the air and is going to look great straffing your airstrip!
Features: Great scale look Easy to assemble Cheap to get airborne Nosewheel steering Simple to follow instructions Includes glue & tools Inlcudes pilot figure
Specs: Wingspan: 968mm Length: 872mm Weight: 450g EDF Unit: 2 x 55mm with brushless outrunner motor ESC: 2 x 20A Servos: 3x9g
Required: your own 4 channel TX & RX 1300mAh 3s Lipoly battery
Full Metal Servoless Retract 1.20 class - High quality servoless retract system for large models, features all metal construction for precision, reliability and durability, also features auto cut off for protection against excessive current draw.......finally, a reliable alternative to air & mechanical operated retract systems on larger models!
Pin size: 5mm Weight: 214g Max Model Weight: 7500g Working Voltage: 4.8v~6v
Full Metal Servoless Retract with Oleo Legs (Tricycle - 90 degree) 1.20 class - High quality servoless retract system for large models, features all metal construction for precision, reliability and durability, also features auto cut off for protection against excessive current draw. Also included are a set of quality Oleo legs and plastic wheels with rubber tyres......finally, a reliable alternative to air & mechanical operated retract systems on larger models!
Pin size: 5mm Wheels: 70mm (Mains) 64mm (Nosewheel) Weight: 397g Max Model Weight: 7500g Operating Voltage: 4.8v~6v
A high thrust and well designed Electric Ducted Fan unit for high power applications, the 12 blade arrangement makes for a quiet fan unit with an amazing sound, this is the closest you will ever get to the sound of a Turbine!
Made with 30% FRP, the indivdual blades are not only able to absorb high power, high rpm motor set up''s, this arrangement also allows for precise blade alignment and rotor balance. The blade locking arrangement is precise and simple to assemble, two rotor adapters are included, one for 5mm motor shafts and one for 8mm shafts, suitable motors are 36mm~39mm diameter. If you have noise concerns at your flying field or are just looking for that realistic Whoooshing sound, this is the fan for you!
Specs: Outside Diameter: 92mm Rotor Diameter: 89mm blade Material: carbon fiber reinforced Nylon rotor Shaft adaptor to motor: 5mm or 8mm Max RPM: 45000 RPM
* Please note, some 39-40mm motors may require material to be removed from the shroud or motor casing for a perfect fit.
With its easy starting characteristics and reliable low-maintenance running the RCG 30cc is an excellent engine. RCG engines have proven themselves the world over for quality and reliability.
Spec. Displacement: 30cc Weight: 980g (Including ignition and muffler) Carburettor: Walbro type Prop Speed: 1500 ~ 9000rpm Max power: 3.9hp / 2.9kw Suggested prop: 18x8, 18x10, 19x8, 20x8 (standard two blade prop) Ignition: DC-CDI (computer controlled auto advance electric ignition system) Power Supply: 4.8-6v Lubrication oil: 2 cycle engine oil Mixture: 25:1 to 40:1 Bore/Stroke: 36mm x 30mm
HobbyKing has a very good relationship with RCG, ensuring all our engines are top quality and well machined. Warranty repairs and returns are also resolved swiftly.
A high thrust and well designed Electric Ducted Fan unit for high power applications, the 10 blade arrangement makes for a quiet fan unit with an amazing sound, this is the closest you will ever get to the sound of a Turbine!
Made with 30% FRP and dynamically balanced, for use with high performance 28mm EDF motors, either 3.17m or 4mm shaft. For the best results from this fan, we reccomend the Turnigy 2855 EDF motors.
Specs: Outside Diameter: 72mm Rotor Diameter: 68mm blade Meterial: carbon fiber reinforced Nylon rotor Shaft adaptor to motor: 3.17mm or 4mm Max RPM: 45000 RPM
This is one big foam Warbird! Being Plug N Fly it is a fast build model packed with enough features and scale detail to make this one bird you will be proud to own.
Made from EPO foam, this model is practical despite it''s size, a one peice removable wing makes for easy transport, even the tail can be un-screwed if desired. The pre-fitted servo''s and electric retracts are all pre-labelled making field assembly fast and simple. It uses the kind of 4s packs that are becoming very common now on large foamie''s, chances are, you already have a few in your flightbox. The Pre-Fitted motor has plenty of power for those scale Warbird aerobatics or just straffing your flying field!
Scale detail is just superb, as are the pre-applied decals, features include pre-installed electric retracts/tailwheel, there is the very scale 4 bladed prop & spinner, navigation lights, adjustable radiator outlet, drop tanks, moulded exhaust stubs and guns. The flaps keep the landing speed right down, this model has no nasty Warbird tip stall tendencies, it just floats in like a trainer. If you have ever fancied owning a Warbird but were put off by all the stories you have heard about them being "difficult" to fly, this is the model for you!
Specs: Wingspan: 1600mm Length: 1400mm Flying Weight: 2800g Motor: 45-58 Brushless ESC: 80A w/BEC Prop: 16x6 Four Blade Servo: 9g x 4, 17g x 2 Retracts: Electric Servoless Type 6 Channel (thottle, aileron, elevator, rudder, retract, flaps)
Includes: All Hardware Instruction Book Glue
Requires: Your Own 6 Channel TX/RX 3200mAh ~ 4000mAh 4s Lipoly Battery
* Please note, due to the size of this model, it will be shipped double boxed to arrive in good conition.
Just one quick glance at this superbly crafted Yak 54 is all it takes to be impressed by it''s quality, look harder and you will see that this model is a serious performer.
The Balsa/ply construction is of the best quality and close attention to weight saving, without compromising strength, has been achieved. More clues as to the quality of this model are given away by the carbon fibre under-carriage and wing tube.
Built with 3D in mind, the hardware is heavy duty, servo horn extensions are provided, rudder is pull/pull, but this model would be just as happy sport flying, so you don''t need to be a hard-core 3D pilot to appreciate and enjoy this truly stunning scale aerobatic model. For 3D you need a 30cc Gas engine, or equivalent electric power train, a 26cc Gas engine will give you a nice sport flyer.
The B-17 Flying Fortress was one of the most famous bombers of WW2, although it served in every theatre, it was the ETO in particular that this sturdy and well armed heavy bomber made its name, operating with the USAF 8th Bomber Group from UK airfields.
The Flying Fortress name came from its heavy defensive capability, the B-17 was bristling with defensive 0.50 caliber machine guns, and it won much affection from its crews due to its ability to soak up heavy battle damage and still get crews home.
Despite its size, this is a practical scale model, construction is from tough EPO, the pre-fitted adjustable retracts are electric and feature alloy oleo struts & a locking bar to ensure no under-carriage collapse, no matter how hard the landing! The scale split flaps ensure ultra slow landings and the one piece wing makes transportation really easy. There is plenty of power from the supplied brushless motors to help you get airborne from almost any airstrip.
One of the most outstanding features of this B-17 is the attention to scale detail, it is easily the most scale foamy Fortress around. This model B-17 is easy to fly, packed with scale detail and is practical, there is something very special about flying 4 engined heavy bomber and this one is no exception!
Specs: Material:EPO Wingspan: 1600mm Length: 1170mm Flying Weight: 2350g Motors: 3130 1350kv Brushless Outrunner x 4 ESC: 30A w/BEC x 4 Servo: 9g x 6, 17g x 1 6 Channel (throttle, aileron, elevator, rudder, flaps, retracts)
Includes: All Hardware Electric Retracts Scale Props/Spinners (3 x RH rotation, 3 x LH rotation) Photo Instruction Book
Requires: Your Own 6 Channel TX/RX 1800mAh~2200mAh 3S Lipoly Battery x 2
This superb Yak 54 is a beautifully designed, built and covered ultra-light aerobatic model that any pilot would be proud to own, good looks aside, this is a balsa high performance 3D plane at an amazing price!
The "30" class is a great size as they are offer ease of transport and are inexpensive to build yet fly like a large model. This Yak offers a satisfying yet quick build with everything fitting "just so", the wings are of course plug in and you have a choice of two motor mounts to choose from. All hardware is excellent quality and includes a CF wing tube, FG horns, cowling blank and so on, a full instruction book is included as are decals.
Flight performance with the right set up is simply brilliant, for 3D flying you will need to use a 4s power train, 3s will be fine for sport flying. Digital high torque micro servo''s are a must to get the best from this model, particlarly given the size of the control surfaces. The colour scheme is attractive and ideal for orientation, this is a very high quality kit at a brilliant price that will give the 3D pilot and the Sport pilot many hours of fun and enjoyment.
On the 7th September 1953, legendary WW2 Fighter ace, Neville Duke flew a specially prepared bright red Hawker Hunter to a new world air speed record of 727.63mph, Duke was awarded the OBE for his work as Hawkers chief test pilot and for his contribution to the development of supersonic flight, a very risky business back in the 1950''s! The bright red Hunter became a favourite at UK air shows where Duke would fly the Hunter to supersonic speed, thrilling crowds with sonic booms before such things were deemed a nuisance and were resigned to a by-gone era!
This superb Hunter features a nice quality fiberglass fuselage and sheeted wings/horizontal stabilizers, ideal for strength and high speed, both are superbly finished in a deep gloss red. The Hunter is 5 channel, featuring a rudder and split flaps, it is also supplied with fixed landing gear, but could be converted to retracts without too much work. The removable fan cover is secured with magnets and an efflux tube is included as well as a comprehensive hardware kit. The included high power 90mm EDF unit will require a 6s capable motor at least to get the best from this stunning looking 1950''s cold war warrior.
The Hunter features a generous size wing and tail which combined with it''s slippery shape give you a nicely balanced, very capable jet with an impressive flight envelope. With the right set up, this superb jet will be capable of blisteringly high speed yet the flaps keep landing speeds sensible. For that final touch, we have a full scale cockpit and pilot available (not included: See related items below) which will really finish off this unique, superb flying and very attractive model of one of the pioneers of the "jet age".
Requires: Your Own 6 Channel TX/RX 8 x MG High Torque Mini Servo 35mm Inrunner/outunner motor with 5mm shaft for 6s (Min) UBEC 5000mAh 6s Lipoly Battery (Min) 80A~100A ESC OPTO
A genuine 3D capable Micro? You better believe it! The Durafly Slick 360 has a spec sheet that is hard to beat, 2s power, real servos and a brushless motor put it head and shoulders above the rest!
The lightweight construction of this model, coupled with large control surfaces make it a brilliant 3D micro. Many models of this size are often limited by linear servos or cheap components, but not the slick! featuring pre-installed, fully proportional HK-5320 Digital servos, a Turnigy ESC and an AP05-3000kv brushless motor The build quality is just fantastic. Fully hinged ailerons are another example of why the slick stands out from the crowd. This is a fast model to put together, the motor and ESC are pre-installed, leaving you to glue on the wing and cowl then go and fly!
Performance is of course what 3D models are all about and this Slick is no slouch! Power is delivered courtesy of the powerful Turnigy Brushless motor running on 2s, for reliability a Turnigy ESC is pre-fitted and the servo/ESC connectors are all compatible with the 4 Channel Orange Micro RX (R415). This model might be cheap to put in the air, but make no mistake, this is one seriously capable 3D Micro, just make sure you take a handful of Lipoly batteries with you when you go and fly, hovering this Slick 360 round the basketball court gets addictive!
Whether your looking to step up from a coaxial helicopter or learning to fly from scratch, the Solo Pro 270 fixed pitch 2.4ghz micro heli is the perfect package. Featuring stable flight characteristics and full 4 channel control ,this fixed pitch helicopter is a great way to learn to fly more advanced maneuvers than a coaxial helicopter can offer.
The helicopter comes completely assembled. All you need to do is charge the included battery via the built-in charge port on transmitter and you will be ready to fly.
The included high quality J4 2.4ghz transmitter with digital trims features an easy to read LCD display and offers interference free flying. The J4 is also both mode 1 and mode 2 capable (mode 2 default) selectable by user.
Whether your looking to step up from a coaxial helicopter or learning to fly from scratch, the Solo Pro 270 fixed pitch 2.4ghz micro heli is the perfect package. Featuring stable flight characteristics and full 4 channel control ,this fixed pitch helicopter is a great way to learn to fly more advanced maneuvers than a coaxial helicopter can offer.
The helicopter comes completely assembled. All you need to do is charge the included battery via the built-in charge port on transmitter and you will be ready to fly.
The included high quality J4 2.4ghz transmitter with digital trims features an easy to read LCD display and offers interference free flying. The J4 is also both mode 1 and mode 2 capable (mode 2 default) selectable by user.
All hobbyKing.com® content is copyright 1999 - 2011 by hobbyKing.com® and hexTronik Ltd. except where otherwise indicated.
The HobbyKing.com® logo and name are both trademarks of hexTronik Limited.
7
4 
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
