Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
Gary49
Customer Type: Platinum Member
Location: Elmsett, UNITED KINGDOM
My movies
Recent product discussions
3D Spinner for DLE30 (33x33x26mm) Red
I can only count 4 bolt holes!!!...
Turnigy 110w Heat Sealing Iron with Sock and Stand 220 - 240v (UK Plug)
Sorry, got no influence on what stock goes where but Hobbyking are trying to get these sort of produ...
Turnigy Aquastar 200A Watercooled Sensorless ESC
These should now be the upgraded version, the problem was that they were flashed with the incorrect...
Turnigy 110w Heat Sealing Iron with Sock and Stand 220 - 240v (UK Plug)
Your'e wish is our command, take a look under new items "Parts and All". ...
325mm Plastic Main Blades for 4 Blade Head (1pair)
I have checked with the supplier of these blades and they are designed only for 4 bladed heads, have...
Turnigy Aerodrive SK3 - 3536-1400kv Brushless Outrunner Motor (US Warehouse)
With a 4s and a 9x6 you will be drawing 50amps so you will need to uprade the ESC but this will take...
Durafly™ Zephyr 1533mm - Replacement V-Tail (UK Warehouse)
Not sure if you have noticed that these are now available in the UK....
Skywalker Caged Quadcopter with 2.4GHz Transmitter (Mode 2) (RTF)
Just received mine, first flight it flew very well but the elevator stick (forwards/backwards) contr...
Turnigy LED Servo Tester for 4 Servo's
When you push the mode button the LED readout changes as follows* In Neutral mode the screen and tes...
NTM Prop Drive Series 35-48A 1100kv / 640w (AU Warehouse)
Meant to also say that although on a 4s it is within the max amps for the motor a co**** pitch prop ...
Recent discussion reply
AA~AAA NiMH Battery Holder with 4mm Banana Plug Charge Lead
They are charged in series....
AA~AAA NiMH Battery Holder with 4mm Banana Plug Charge Lead
Just managed to get hold of one and try it, it must have 4 batteries installed to work, it will not ...
AA~AAA NiMH Battery Holder with 4mm Banana Plug Charge Lead
It does charge them in series, ie if you put 4 x 1.2v batteries in they will need charging as a 4.8v...
AA~AAA NiMH Battery Holder with 4mm Banana Plug Charge Lead
Yes, that will be fine as long as you set your charger accordingly....
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware) (USA Warehouse)
Yes you can, this one fits ok;ZIPPY Flightmax 2500mAh Transmitter Pack (Futaba/JR) SKU: ZIP25003S3C...
Hobbyking E-Fair Balsa Glider 1540mm (ARF) (UK Warehouse)
A few parts related, sorry, no suitable folding props available in the UK at the moment, hopefully s...
HobbyKing 20A BlueSeries Brushless Speed Controller (UK Warehouse)
The one you have chosen or this one TURNIGY Basic 25A v3.1 Speed Controller (UK Warehouse) would b...
D2822/14 Brushless Outrunner 1450kv
This will be ok, will draw about 12amps....
Turnigy SCT V2 2WD 1/10 Brushless Short Course Truck (KIT)
Pretty sure it comes witha 13th pinion....
Linkage Stopper D2.1mm (10sets)
We are working on this, please give us another try sometime....
Wiki-blog entries.

Share