Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!


Public Profile
strutter
Customer Type: Platinum Member
Location: little mountain, AUSTRALIA
My movies
Recent product discussions
Turnigy Graphene 2200mAh 3S 65C LiPo Pack w/ XT60
is the width 31cm ??that makes the pack square ?? should it be 21cm ??...
Turnigy LiPoly Battery IR Meter
Can any body tell me what is a good reading ? For the IR And how much the difference should be to ...
HobbyKing® ™ Altimeter
great little gadget , but can you buy the on board unit sepeate , need 2 ?? strutter ...
BMS-136MG Retract Servo (Metal Gear) 6.1kg / .31sec / 34g
Just had my second one die this caused a radio problem and destroyed a great model , ordered 2 to re...
HXT 5010 Twin bearing Digital Servo 6.9kg / 0.16sec / 39.2g
will these servos be ok running on 6.6 Lifepo4 receiver pack ? see they are OK for 6volt ?? ...
GWS PG-03 Piezo Gyro/Futaba
Hi anybody know where i can find set up instructions for the PG -03 gyro ?? Strutter...
Durafly™ D.H.100 Vampire Mk6 EDF Jet w/retracts 1100mm (PNF)
Has any body had trouble with the S/c ? on the first flight after 3 min it died ! all servos working...
HobbyKing™ HKU5 5V/5A UBEC
I have just purchased one and intend to use it with A Zippy 2100 RX pack, but it is getting quite Ho...
RCG 26cc Gas engine w/ CD-Ignition 2.6HP/1.95kw (AU Warehouse)
Why is there no spare mufflers for the RCG 26 Strutter...
Recent discussion reply
HobbyKing® Altitude/Time Limiting System for R/C Airplane
having the same problem if you find out How let us know , have tried the Fly dream site but can not ...
HXT 5010 Twin bearing Digital Servo 6.9kg / 0.16sec / 39.2g
thanks Tim I realize that the 2s life is down to about 6.8 volts almost as soon as you turn on fo...
HobbyKing® Altitude/Time Limiting System for R/C Airplane
can you get me in touch with tapio ??...
Durafly™ D.H.100 Vampire Mk6 EDF Jet w/retracts 1100mm (PNF)
Thanks Banjo ,yes tried all that but No go so fitted the Turnigy 60...
HXT900 Micro Servo 1.6kg / 0.12sec / 9g
just bought 6 more they are a great servo,using them in my MPX Twister very fast no problems at all...
Wiki-blog entries.

Share