USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
EDWARD
Customer Type: Platinum Member
Location: CORONA, UNITED STATES
My movies
Recent product discussions
Harrier 70mm EDF Jet - 780mm (ARF)
come on HK, $40 plus $50 to US, for bare airframe without motor/servos? This would be a nice additio...
Mini F-18 EDF Fighter Jet (EPO) (Kit)
This mini F-18 had very good review and I wish HK would stock it in USAWarehouse....
HK2836 EDF Outrunner 3500kv for 64mm
I am running this motor with HKEDF64 fan unit. the five blade impellor is well balanced, running pre...
Hobbyking 64mm Alloy EDF 4000kv - 850w (4s - Outrunner Version)
Hi Hobbyking, nice unit! Maybe your site can offer replacement impellor and adaptor? I am really int...
XK2860-B-5050KV Brushless Inrunner
Anyone tried this motor for 70mm EDF? The rated amp seems it can handle more than 4s... Would give q...
Durafly 310 1100mm replacement Propeller (1pr)
Does anyone know the size and pitch of this pair of prop? Maybe I can use them for B-17......
Control Arms 43x13x24x3mm (5pcs/bag)
Did anyone use set screw to secure landing gear leg with this steering arm? Couldn't see it from the...
NTM Prop Drive Series 35-36B 1400Kv / 495W
After running my older version of this motor (1300kv) for over a hundred flights, it seems having ba...
Electric Retract with Reversible Mount (1pc) 18.8g
I bought several of these and used them as the main gear for 70mm EDF (3-4 lbs, tricycle gear). Now ...
Turnigy 450/500 H2223 Brushless outrunner 4400KV
Anyone install this motor in a 70mm fan running 4s? How much is the amp and wattage? How warm did th...
Recent discussion reply
HXT900 Replacement Gear Set
As far as I know this is the only replacement gear set for servos. For less than a dollar it is wort...
Servoless Steerable Nose Retract for Small Models 33mm x 35mm Mount
You need to open the case of the retract unit with screw driver and remove the retaining C-clip that...
HK15168 Coreless Analog Micro Servo 8g / 1.2kg / 0.12s
Fun cub is larger foamie so a little beefier servo would be better. Try some turnigy metal gear 9g s...
Turnigy L2855-2100 EDF Outrunner (900w)
try this: put your throttle stick at max before turning on the radio* then turn on the radio* then c...
Turnigy L2855-2100 EDF Outrunner (900w)
try this: put your throttle stick at max before turning on the radio* then turn on the radio* then c...
Mini F-86 EDF Fighter Jet (EPO) (Kit) (US Warehouse)
I have quite a few EDFs, from this 50mm to 90mm. Maybe this little 50mm EDF is not quite for EDF beg...
Servoless Steerable Nose Retract for Small Models 33mm x 35mm Mount
You will need either take apart the retract unit or use a adaptor with two set screws to connect the...
Servoless Steerable Nose Retract for Small Models 33mm x 35mm Mount
This will fit but is a little too light duty considering the higher speed and weight of Habu. Try HK...
HK2836 EDF Outrunner 3500kv for 64mm
on 4s 64mm EDF this drew around 35A. Depending on how much weight you plan to gain. This motor with ...
HK15168 Coreless Analog Micro Servo 8g / 1.2kg / 0.12s
The voltage for the servo comes from the receiver, around 5V regardless of your battery voltage. As ...
Wiki-blog entries.

Share