Please confirm your location:




Public Profile
Norton
Customer Type: Platinum Member
Location: Poznan, POLAND
My movies
Recent product discussions
USB Simulator Cable All in One
Insane dongle. It simulates original Phoenix and G4/5 transmiter. Simulators thinks that original tr...
Recent discussion reply
Dr. MadThrust DC Smart Regulator with Electric Soldering Iron
200 is typical temp. for "standby" position. It's not burning solder and keeps temp. for fast back t...
Dr. MadThrust DC Smart Regulator with Electric Soldering Iron
It's varies depending on the soldering iron temperature. Results on 3S LiPO, C - cold (warming up), ...
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware)
You have to push range test/bind button and hold it. When You do that, TX will work on 1/10 power.
...
FrSky V8R4-II 2.4Ghz 4CH Receiver
Yes it is....
FatShark Dominator 3rd Generation modular FPV System
Yes. 100pcnt compatible....
Nylon XT60 Connectors Male/Female (5 pairs) GENUINE
You can use HXT or Gold 3,5 or 4mm. Gold 5mm can handle 140-150A currents. For extreme currents (200...
FrSky V8R4-II 2.4Ghz 4CH Receiver
There is no alternative way. You have to solder it or give it to person who can....
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware)
Yes. No problem. MENU>FUNC SETTING>V-TAIL STATE ACT ELE1 100 ELE2 100 RUD1 -100 RUD2 100...
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware)
8xAA battery or 1x3S (11.1V) LiPo...
D2822/17 Brushless Outrunner 1100kv
7x4 I recomend You APC props. And don't forget to balance it well....
Wiki-blog entries.

Share