USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
danxee
Customer Type: Gold Level Member
Location: Nizhniy Novgorod, RUSSIAN FEDERATION
My movies
Recent product discussions
Hobby King 401B AVCS Digital Head Lock Gyro
Read all 312 discussions and found no answer to my q. Can I use this gyro to do camera gimbal stabi...
HobbyKing E-OSD
Can I hook this thing up into a balance plug of my 6S Lipo? I need to measure voltage and thinking o...
Super Simple Mini OSD
My previous question turned into stars... I repeat: Can I connect this OSD to balance plug of my 63...
Super Simple Mini OSD
****...
12V 4.5A UBEC 2-5S Lipoly (7.2-21V)
So guys will it work properly with 6S Lipo? 6S gives us 22.2V which is in range (below 23V), but the...
Master Airscrew propeller 14x7
Is this suitable for the big (1000mm) octocopter? ***********ecalc.ch/xcoptercalc_e.htm says it can ...
Recent discussion reply
Hobby King 401B AVCS Digital Head Lock Gyro
"The multicopter controllers are going to be more accurate" - This is not obvious at all. For them t...
FC 28-22 Brushless Outrunner 1200kv
Also be advised that this motor has H1.5 screws that fixing the motor mount and these screws will ge...
12V 4.5A UBEC 2-5S Lipoly (7.2-21V)
I decided to use this DC-DC buck converter instead: DC/DC LM2596 4-35V to 1.25-30V Buck Converter 5m...
HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)
This depends on the reversal of the gyros. CW = 100pcnt if corresponding gyro is NOT reversed, o...
Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2)
This happens sometimes when settings are invalid in yout t6config. Try loading the factory default s...
Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2)
Try this as a start: Type=ACRO, EndPoint=all 100, stick=model2, mix.=switch:off for ...
HobbyKing ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger w/ acc.
To connect this charger to PC for LogView, you need to buy Hobby King 2.4Ghz 6Ch Tx USB Cable, cut i...
HobbyKing ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger w/ acc.
Balance cycle may finish if your "Safety timer" is expired - it has a default value of 120 mins. Che...
HobbyKing ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger w/ acc.
If one of the cells is 1.5v less voltage, that means either: - it is faulty (unlikely as you have se...
HobbyKing Quadcopter Frame V1
I went to my local DIY store and purchased a wood rod (30mm x 15mm) for making the frame and also a ...
Wiki-blog entries.

Share