Please confirm your location:



USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
chanyote66
Customer Type: Platinum Member
Location: Oak Ridge, UNITED STATES
My movies
Recent product discussions
Turnigy Reaktor 2 x 300W 20A Balance Charger
I am very hesitant to get one of these after my terrible experience with the ECO6-10 charger that ho...
Turnigy Multistar 4822-390Kv 22Pole Multi-Rotor Outrunner (US Warehouse)
Ok... Ill see if i can post specs (from ******* website) 50% throttle Volt - Prop - Amp - Thrust (...
TURNIGY MEGA 400W V2 Lithium Polymer Battery Charger (Version 2) (US Warehouse)
Does anyone know what the max charge rate is for Storage mode? I have 5000mah 4S Lipos and my curren...
D2826-6 2200kv Outrunner Motor (US Warehouse)
I was thinking of building a micro jet and throwing on a 4.75x4.75 prop using a 4s... has anyone tri...
D2826-6 2200kv Outrunner Motor (US Warehouse)
Has anyone else had heat issues with this motor? I have tried: 7x5.5 Master Airscrew at half throttl...
D2826-6 2200kv Outrunner Motor (US Warehouse)
I have this and a 30-35A ESC on a 2200mah 3s turning a 7x4 prop. It gets extremely hot! is this beca...
Hobbyking SS Series 18-20A ESC (US Warehouse)
Has anyone combined the FET's of two of these for a higher amperage? I have 4 that I got For a Quadr...
Recent discussion reply
HobbyKing™ ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger w/ acc. (AR Warehouse)
this charger says 10 amp... you will be lucky to charge at 120 watt at most without it overheating.....
Turnigy Reaktor 2 x 300W 20A Balance Charger (AR Warehouse)
yes. this will charge/discharge as needed to get the battery to storage levels...
Turnigy Reaktor 2 x 300W 20A Balance Charger (AR Warehouse)
no. if you wanted a external board I would look for a parallel board that supports 6s. currently you...
HobbyKing™ ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger w/ acc. (US Warehouse)
yes, you would have to make a cable from the banana plugs (main connectors) to your 1s cell...
Turnigy Multistar 4822-390Kv 22Pole Multi-Rotor Outrunner
the screaming is timing issues. I ran one of these on a t-motor Pro ESC and it was fine, but when ru...
Turnigy Reaktor 2 x 300W 20A Balance Charger
not quite correct... with a 350 watt power supply you can only charge at up to 300W (charger needs ...
2040 Brushless Inrunner Motor 4800kv (AR Warehouse)
select your currency at the top right of the page....
HobbyKing™ ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger w/ acc. (AU Warehouse)
I have (well had) 4... one about caught fire since its thermal protection did not switch. luckily I ...
Turnigy Multistar 4822-390Kv 22Pole Multi-Rotor Outrunner (US Warehouse)
Uploaded a file of it....
Turnigy Multistar 4822-390Kv 22Pole Multi-Rotor Outrunner (US Warehouse)
*F0X TECH...
Wiki-blog entries.

Share