Please confirm your location:




Public Profile
un4seen
Customer Type: Platinum Member
Location: Lodz, POLAND
My movies
Recent product discussions
MultiStar White Edition 9.4x4.3 Multi-Rotor Wood Props (CW/CCW Set) (DJI Style Hub)
What is the center hole diameter on these? And why the hell does "dji style" replace proper specs? N...
1/3-inch Sony CCD Video Camera 700TV Lines F1.2 (PAL)
BE WARNED. The one I received today was different - it's denoted "EFFIO 2.1" on the PCB and the PCB...
Multiwii Mini Flight Controller w/FTDI Interface
So, anyone got UART to work? I've got a Crius bluetooth, but I get no data on UART port. Also, the U...
Micro Integrated PCB w/ESCs Quadcopter Frame 235mm (KIT)
Mounting holes are 12.5mm and 20.5mm, so not really standard. 1811 motors won't fit, unless you get ...
Multiwii Mini Flight Controller w/FTDI Interface
For anyone interested: #define MINIWII works correctly. FTDI is "CP210x USB to UART Bridge", drivers...
Boscam HD19 ExplorerHD Full HD 1080p FPV Video Camera with Integral Recorder
Is it possible to change FOV in software (like in a GoPro), or at least get a narrower lens? I hate ...
Turnigy Multistar ESC Programming Card
Damn, again with the low voltage cutoff. Come on, Hobbyking, why would anyone want it on a multiroto...
Atmel Atmega Socket Firmware Flashing Tool
Hey, Hobbyking!
Now make the same for SiLabs chips so we can reflash the Plush series or the AE-...
Turnigy Talon Tricopter (V1.0) Carbon Fiber Frame
As I see, at least one person has it already flying, so:
1. Quad version has a problem with moto...
Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
I have a serious problem getting it to work and I'll be grateful for any help. I have a small quad (...
Recent discussion reply
Quanum DIY FPV Goggle Set with Monitor (KIT)
The resolution is 480x272, and the screen automatically switches from PAL to NTSC, depending on the ...
Turnigy Integrated PCB Micro-Quad V2 (Black) (KIT)
Yes, KK2 will fit, as will any board 45mm hole spacing....
Micro Integrated PCB w/ESCs Quadcopter Frame 235mm (KIT)
TGY6A.hex I use it for a while now, no issues. To anyone wanting to go 3S on this thing - while it...
Multiwii and Megapirate AIO Flight Controller w/FTDI (ATmega 2560) V2.0
benybee: Previous version had a slight manufacturing defect. One of the voltage regulators had one o...
Hobbyking S650 Glass Fiber Hexcopter Frame 655mm
Well, maybe it's time for you to expand your knowledge before you accuse others of giving bad advice...
Hobbyking S650 Glass Fiber Hexcopter Frame 655mm
Yes, it will fly and yes, there are even heavier frames. But just because it's not the worst one, do...
Hobbyking S650 Glass Fiber Hexcopter Frame 655mm
If you want a hexa, I'd advise to find a better one, at least the Turnigy Talon hex. This one is way...
D2822/17 Brushless Outrunner 1100kv
You can't use the adapter type you're looking for, these motors don't have holes on them. I actually...
ST360 Quadcopter Frame w/Motors and Propellers 360mm
It is sideways in the picture, but mounting hole pattern is perfectly symmetric, so you can install ...
ST360 Quadcopter Frame w/Motors and Propellers 360mm
With 8 inch props, these motors won't pull more than 10A/motor on max throttle and around 4A when ho...
Wiki-blog entries.

Share