Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
CldMNS
Customer Type: Platinum Member
Location: MANAUS, BRAZIL
My movies
Recent product discussions
Turnigy 9XR Transmitter Mode 2 (No Module)
This transmitter does work with Turnigy 9X module?...
APC Style Propeller 6x4 (2pc)
Can i use this propeller in the RadJet 800?...
TURNIGY V-Tail Mixer. Ultra-small
Can i use this mixer to use a positive and a reverse servos? ...
Recent discussion reply
Hobbyking Radjet 800 EPO 800mm (PNF)
APC style 6x4 http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=22423...
MX2 Blue 3D 1400mm EPO (PNF)
Only if you change the speed control...
Turnigy 9X 2.4GHz 8Ch Receiver (V2)
Into transmitter menu, system, stick set, select mode 4 for better config for planes(ch1 ailerons, c...
MX2 Blue 3D 1400mm EPO (PNF)
I have one MX2 and i change to 2 blade props 13x8 and word well...
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 1) (v2 Firmware)
the battery compartment is very small, and how the AA batteries do not last I solved both problems b...
Turnigy nano-tech 2200mah 4S 25~50C Lipo Pack
I had this problem and i solve charging without balance plug and work well....
Turnigy 2200mAh 3S 30C Lipo Pack
Yeah, sure you will have problems if you do it this way, you shorten the life of your batteries and ...
Turnigy nano-tech 2200mah 4S 25~50C Lipo Pack
Depends on the size and kind of the plane if is a edf jet, sport or traine, but 5-6 mins is a expect...
Wiki-blog entries.

Share