Please confirm your location:




Public Profile
gmango
Customer Type: Platinum Member
Location: Woodbridge, AUSTRALIA
My movies
Recent product discussions
Turnigy 1811 brushless Outrunner 2900kv
Are there any other prop adapters that would work with this motor? the supplied adaptors are rubbish...
Hex locknuts M2 50pc
does M2 means that the hole diameter is 2mm?...
Hobbyking Fiberglass Quadcopter Frame 500mm
Weight would be nice.. not shipping weight, just the frames weight. that's just basic info that you ...
HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)
Just a warning to people looking to flash their board. I have discovered some sort of a bug with kkm...
HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)
Ive just flashed my board with xcopter 4.7 firmware. all plugs are connected correctly (as per RCExp...
HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)
ive got my first quad just about ready to fly using the v2.1 firmware (just to see what it is like) ...
Turnigy 1811 brushless Outrunner 2900kv
what is the diameter of the spinner?...
HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)
not directly related to this item. but im sure anyone who owns this would know the answer. How do y...
Hobby King 2.4Ghz Receiver 6Ch V2
Hi, a Noob question here. for power to the Rx, can I just draw power straight from my 3s battery by ...
HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)
heres a really simple/stupid question. of all the firmware available in the KKMulticopterFlashTool, ...
Recent discussion reply
Turnigy Integrated PCB Micro-Quad (KIT)
the measurement is diagonal, from motor shaft to motor shaft. ...
Turnigy Integrated PCB Micro-Quad (KIT)
They recommend the Turnigy 1811 brushless Outrunner 2900kv with a 5030 prop. so i'm guessing tha...
Hex locknuts M2 50pc
Thanks :)...
Hobbyking i86 Multi-Rotor Control Board
the only thing in it that would suggest a slightly more stable platform is the Mems gyros that it us...
Hobbyking i86 Multi-Rotor Control Board
by incorporating the 3 axis into the one chip you also have the added advantage of the board being m...
Hobbyking SK450 Glass Fiber Quadcopter Frame 450mm
yeah plenty of other stores supplying boards with built in accelerometers and even barometers for ab...
Hobbyking Fiberglass Quadcopter Frame 500mm
awesome thanks for that *)...
HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)
Nice one Ron...
HobbyKing Mini Quadcopter Frame V1 - 539mm
It is easier than a 4 channel heli but its still takes a bit of getting used to if you have never fl...
NTM Prop Drive Series 28-30A 750kv / 140w
*Blackjack220 your motors dont get too hot? ive got a 1.2kg quad as well and I'm using 9x5 3 bla...
Wiki-blog entries.

Share