USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
UltraMicro
Customer Type: Platinum Member
Location: Cupertino, UNITED STATES
My movies
Recent product discussions
Mig 15 35mm EDF Micro Jet EPO (PNF)
Ha, I had that problem with my micro f-86. Get's a bit annoying after a while. There is two thins th...
Turnigy D3530/14 1100KV Brushless Outrunner Motor
I just got my 3530/14 motor and I seem to be having issues. My specs are below and they should be id...
Folding Propeller 6x4inch
What is the diameter on the larger side of the spinner (the part closer to the actual nose of the pl...
Turnigy Micro Quad V2 PNP ARF Includes KK2.0 LCD Flight Control Board
You can really use any 5030 propeller. Just make sure you have two prop counter clock wise and two c...
Slow Fly Electric Prop 1045SF (4 pc)
What's the largest shaft diameter this prop can fit? I have a 4mm prop adapter with a 6mm shaft....
Walkera QR Ladybird Ultra Micro Quadcopter RTF (Mode 2)
My ladybird running on the 2402 is getting only 100ft of range. I was planning on doing fpv with thi...
Turnigy 2815 EDF Outrunner 4800kv for 55/64mm
My motor is getting hot on no load after a full throttle run for a min. I'm using a 30A esc with a 3...
Turnigy 1811 brushless Outrunner 2900kv
Anyone tried a 2s GWS 5030 on this motor? What's the thrust in grams? Thanks...
Shark High Performance Racer/Glider 1228mm Composite (PNF)
Anybody know the shaft diameter? ...
H-King Atom Mini Glider 750mm w/Battery (PNF)
Anybody know how much weight in grams this plane can carry? I'm considering it for FPV. ...
Recent discussion reply
Floater-Jet Replacement Motor (AXN-2208-2150)
Roughly 820grams full throttle....
Mig 15 35mm EDF Micro Jet EPO (PNF)
Ha, I had that problem with my micro f-86. Get's a bit annoying after a while. There is two thins th...
Turnigy D3530/14 1100KV Brushless Outrunner Motor (US Warehouse)
Yeah I was surprised with that too. What I did was take a drill and 7mm bit, and drill the hole bigg...
Turnigy D3530/14 1100KV Brushless Outrunner Motor (US Warehouse)
Yeah those things in the pictures are the prop adapter (it fits a 7mm prop hole) and mounting screw....
Shark High Performance Racer/Glider 1228mm Composite (PNF)
Construction is fine. All surfaces are bolted on and wings have a 12mm cf spar....
Shark High Performance Racer/Glider 1228mm Composite (PNF)
not much of a glider, once you get down to roughly 30mph> the plane gets a bit twitchy. Banged it up...
Turnigy D3530/14 1100KV Brushless Outrunner Motor (US Warehouse)
Go for a 30a< because the specs are a bit off and multiple review on rcgroups show allthe way from 2...
Walkera QR Ladybird Ultra Micro Quadcopter RTF (Mode 2)
I don't know if it's binding that's the problem I have.Whenever I turn mine on it has to go through ...
Boscam 5.8Ghz 200mw FPV Wireless AV Tx & Rx Set
The tx and rx can both run on a lipo battery between 7 and 15 volts. So a 7.4v and 11.1v lipo batter...
Walkera QR Ladybird Ultra Micro Quadcopter RTF (Mode 1)
On the contrary, I own one of these ladybirds and they are uniquely sharp. It's a good trimmer. Fly ...
Wiki-blog entries.

Share