USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
Whitman Flyer
Customer Type: Platinum Member
Location: MANHASSET, UNITED STATES
My movies
Recent product discussions
HobbyKing GA-250 MINI-MEMS Gyro (USA warehouse)
The price has gone up 15% since I first starting using these a year ago. That is disappointing. I us...
HobbyKing GA-250 MINI-MEMS Gyro
Why did the price go up on these in the last week? They used to be $9 and change....
Corona DS-319HV Digital Metal Gear Servo 4.2kg / 34g / 0.05s
Not a discussion, a statement. These do not work with the GA-250 GYROS at all. One of my servos got ...
TGY-390DMH High Performance MG Digital Servo (Extra Strong) 5.4kg / .11sec / 22.5g
What is the stall current draw? Is it more than 1 amp per servo? Has anyone tested these? Thanks. Ch...
TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo 3kg / .06sec / 21g
What is the stall current draw? Is it more than 1 amp per servo? Has anyone tested these? Thanks. Ch...
Turnigy G60 Brushless Outrunner 500kv (.60 Glow)
Hobbyking? When will you offer this in the USA Warehouse? Thank you....
Recent discussion reply
HobbyKing GA-250 MINI-MEMS Gyro
Could be. On the OrangeRx Receiver's they put a disclaimer that the price varies as a function of pr...
HobbyKing GA-250 MINI-MEMS Gyro
Jaki79: You are running the TGY306's? I run those with the GA-250 on several planes and they work fi...
HobbyKing GA-250 MINI-MEMS Gyro
Assuming you have the gyro assigned to the Aux Switch, you would rapidly toggle the AUX switch to ex...
HobbyKing GA-250 MINI-MEMS Gyro
Which menu? On your transmitter or the blinking lights "menu" on the GA-250? Do you have the rudder ...
HobbyKing GA-250 MINI-MEMS Gyro
EFURCHE, yes you can. I have this setup on my planes. Just plug the red wire into the gear or aux po...
HobbyKing GA-250 MINI-MEMS Gyro
It's a 70hz servo and that is HK's recommendation when I asked them. BUT I run mine on 6 volts and 2...
Turnigy G60 Brushless Outrunner 500kv (.60 Glow)
I used to have a **** 55" edge 540 with a G46 550kv and a 16x10 and it was fine. BUT I have seen the...
Turnigy G60 Brushless Outrunner 500kv (.60 Glow)
I tested it yesterday for the first time on the plane. I have yet to maiden it. But with 70 amp Turn...
Turnigy G60 Brushless Outrunner 500kv (.60 Glow)
I have an EF 540T 60" and the motor fits perfectly....
Futaba Servo Arm Set
No, these are too big. You need to buy the extra-long Dubro arms or the original Hitec arms....
Wiki-blog entries.

Share