Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!

Public Profile
Customer Type: Gold Level Member
Location: Kingston, UNITED STATES
My movies
Recent product discussions
Recent discussion reply
NTM Rotor Drive 450 Series 1700KV / 930W
Try and reverse motor direction in esc programming. Also check to see if anything is blocking the in...
Corona R8FA 2.4Ghz Fasst Compatible Reciver (USA Warehouse)
FASST is a Futaba 2.4g spread spectrum communication system. Most Futaba radios use this (not all th...
Corona R4FA 2.4Ghz FASST Compatible Receiver
Yes. This will work with any futaba fasst system....
Futaba 6EX 2.4GHZ FAAST Radio System w/R617FS Receiver (Mode 2)
No, Futaba radios require Futaba receivers or Futaba compatible receivers. The fbl100 uses a differe...
Corona R6FA-SB 2.4Ghz FASST Compatible S.BUS Receiver
Go to the "files" tab on this page and download the manual. I was able to get it to bind and change ...
10A Dual Brushless ESC for Micro Heli (Suits FBL100, MCPX, SoloPro 100)
No gyro or received in this unit. It's an esc only....
Turnigy™ TGY-306G Ultra Fast/High Torque DS/MG Alloy Cased Servo 3kg / 0.06sec / 21g
Couldn't find the link to the adapter plate. The servo bolts to the plate and you then bolt the plat...
Turnigy™ TGY-306G Ultra Fast/High Torque DS/MG Alloy Cased Servo 3kg / 0.06sec / 21g
There is an adapter plate that will allow you to fit a micro servo in place of the mini sized servo ...
JST-SH Servo Plug Set (Futaba) Gold Plated (10pairs/set)
Use a proper crimping tool. Like this one:
GT450PRO One Way Bearing (1pc)
Length: 11.85mm Outer Diameter: 10.03mm Inner Diameter: 6.38mm Measured with digital caliper. The in...
Wiki-blog entries.