Location: UNITED STATES
HobbyKing RC Model HomePage RC Radio Control Help and Support RC Hobby Forum Contact our RC Hobby Support Staff About HobbyKing
RC Model Planes RC Model Cars RC Model Helicopters RC MultiRotor and Quadcopters RC Boats RC Electronics
AIRPLANES AIRPLANE ACCESSORIES POWER SYSTEMS RADIO SYSTEMS
TELEMETRY & FPV
 
 
 
 
 
CARS CAR ACCESSORIES POWER SYSTEMS RADIOS
 
 
BOATS BOAT ACCESSORIES POWER SYSTEMS RADIOS
HELICOPTERS HELI ACCESSORIES POWER SYSTEMS RADIOS
 
 
 
MULTIROTORS ACCESSORIES POWER SYSTEMS RADIOS
ELECTRONICS ELEC. ACCESSORIES
EMAIL  PASS 
TOTAL $0.00 QTY 
Planes & Parts
Helicopters & Parts
Multi-Rotors & Parts
Cars & Parts
Boats & Parts
Bikes & Parts
Scale R/C Tanks
FPV & Telemetry
Batteries & Accessories
Chargers & Accessories
Electric Motors
Speed Controllers
Robotics & DIY
Servos & Parts
Radios & Receivers
Gas/Glow Engines & parts
UBEC & Regulator
Power Systems
Hardware & accessories.
Tools
Clothing, Gift & Acc.
Sale/Liquidation

Language
Currency
USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
shelterock
Customer Type: Platinum Member
Location: Shelter Island, UNITED STATES
My movies
Recent product discussions
Turnigy Talon Tricopter (V1.0) Carbon Fiber Frame
Here's my setup. NTM 2826 1000kV, F30A with SimonK firmware, GWS 9x5x3 props counter-rotating, HK MG...
Turnigy Talon Octocopter Plate Set.
If you buy 1 Quad and add the parts you're at $135. If you buy 2 quads, which provide all the parts ...
TP Slow Fly propeller 1047 (10x4.7) GWS style
How many pieces are there in this bag?...
Recent discussion reply
F9F-8 Cougar Composite 90mm EDF Jet 1100mm (ARF)
Scott, Can we get a decent picture of the bottom of the wing and an understanding of how the wing is...
Hobbyking X900 Tricopter Glass Fiber Multi-Rotor Frame (USA warehouse)
the 306 is fast but has a fragile constitution.Talon Tris flown with 306 saw rapid failure if landed...
The Retro Series - Pioneer 1020mm EPO (PNF) (USA Warehouse)
Finding the right C rating is important. a 1300mah pack at 10C delivers 13amps. 1.3a x 10C. not enou...
Turnigy Talon Tricopter (V1.0) Carbon Fiber Frame
She's great, I had 10x6x3 GWS props on these NTM 2826-1000kV motors and was pulling 300Wats, 20 amps...
Turnigy Talon Tricopter (V1.0) Carbon Fiber Frame
I have this and all up weight is 850g with NTM2826 KK2 and props. Battery puts it under the weight o...
Turnigy Talon Tricopter (V1.0) Carbon Fiber Frame
Sweet, would like to see a video or photos of that. We're on rcgroups. Check out the talon thread. ...
Turnigy Talon Tricopter (V1.0) Carbon Fiber Frame
I haven't mounted the 380mm. I don't think you need higher gains with longer arms. Longer is inheren...
Turnigy Talon Tricopter (V1.0) Carbon Fiber Frame
I took the 320mm Quad arms and cut the pivot grooves and it flew great right to the scene of the cra...
Turnigy Talon Tricopter (V1.0) Carbon Fiber Frame
The spinning 260 is not a servo problem. It sounds as if your Rabbit board has a reversed gyro. Any ...
Turnigy Talon Octocopter Plate Set.
I did the hexa talon plus parts and that adds up to $132. So 2 quads and a set of octoplates is the ...
Wiki-blog entries.
 

Share

Copyright Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved