Please confirm your location:




Public Profile
shadowless
Customer Type: Platinum Member
Location: Sunnyside, UNITED STATES
My movies
Recent product discussions
SkyZone TS353 5.8G 400mW FPV Transmitter
Does this one has a SMA or RP-SMA? Is it male or female port?...
Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
Is there an arduino firmware that will work on this?...
2.4Ghz 4 Channel AV Transmitter 200mW FPV
Does it work with a LAWMATE 2.4GHZ WIRELESS AV RECEIVER?...
TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo 3kg / .06sec / 21g
Does this servo jitter? ...
Recent discussion reply
NTM Prop Drive Series 28-30A 750kv / 140w
I use medium...
NTM Prop Drive Series 28-30A 750kv / 140w
I use 10x47 on 3s. I tried 9x5 too. 10x47 seems to be smoother and quieter....
TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo 3kg / .06sec / 21g
seems like you are the only one talking abt it....
TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo 3kg / .06sec / 21g
Wonder what's wrong with your setup. ...
NTM Prop Drive Series 28-30A 750kv / 140w
I use this motor with 1050 gws prop and 3s 4400mah battery. It flies fine with gopro hard mounted. ...
Turnigy TGY-778MG Alloy Case Digital Slim Wing Servo (Metal Gear) 5.5kg / .10sec / 23g
Camera gimbal need fast and smooth servo and with no slop. Many of the cheap servos are hit or miss....
NTM Prop Drive Series 28-30A 750kv / 140w
what is your voltage monitor setting?...
NTM Prop Drive Series 28-30A 750kv / 140w
what timing do you use? medium or low? ...
Hobbyking SS Series 25-30A ESC
One of my ESC puff smoke when I was trying to program it. I removed the heat shrink to check and to ...
Wiki-blog entries.

Share