Please confirm your location:




Public Profile
BuggyTM
Customer Type: Platinum Member
Location: Köln, GERMANY
My movies
Recent product discussions
Turnigy Trailblazer 1/8 4WD Brushless Monster Truck ARR (USA Warehouse)
http://www.youtube.com/watch?v=jKXoehMX3Ik ...
Turnigy Trailblazer 1/8 4WD Brushless Monster Truck ARR (AUS Warehouse)
http://www.youtube.com/watch?v=jKXoehMX3Ik ...
Turnigy Trailblazer 1/8 4WD Brushless Monster Truck RTR (USA Warehouse)
http://www.youtube.com/watch?v=jKXoehMX3Ik ...
Turnigy Trailblazer 1/8 4WD Brushless Monster Truck ARR (DE Warehouse)
Hier ein Video von mir:...
Turnigy Trailblazer 1/8 4WD Brushless Monster Truck RTR (DE Warehouse)
Hier ein Video von mir: http://www.youtube.com/watch?v=jKXoehMX3Ik...
Turnigy 2211 Brushless Indoor Motor 2300kv
What is the size of the mount? What is the size screwcenter to screwcenter? ...
18-11 2000kv Micro Brushless Outrunner (10g)
What is the diameter for the screws in the mounting plate?...
Hobby King 2.4Ghz Receiver 6Ch V2
Is it possible to get a SUM-Signal in this Receiver?...
Recent discussion reply
Turnigy nano-tech 300mah 1S 35~70C Lipo Pack (Fits Nine Eagles Solo-Pro 100)
Yes it will fit perfect! BUT U HAVE TO CHANGE THE POLES ON THE CONNECTOR!!!! CHANGE WITH - OR U SE...
ZIPPY Flightmax 1800mAh 9.9V 5C LiFePo4 TX Pack (DE Warehouse)
Yes it will fit perfect. U have to change the connector, but the Battery will fit. I use it in my 9...
HobbyKing 12A BlueSeries Brushless Speed Controller
Its the best ESC in the 10-12A Class. I like the 16k switching frequency! No high frequency sounds f...
Hobby King 2.4Ghz Receiver 6Ch V2
Yes, if u are able to solder directly to the pcb. There is a RSSI-Pin on the Receiverchip!...
Turnigy nano-tech 1000mah 2S 25~50C Lipo Pack
think about the C Rates: the 2s 1000maH with its 25-50C can Handle 50Amax.* the 3S 850mah with its 2...
1/18 Brushless 4WD Stadium Truck w/ 18Amp System (DE Warehouse)
I run it on 3S :D its very very fast with it. i got no heat problems on the motor. ...
On Board Lipoly Low Voltage Alarm (2s~4s)
This is the "normal" funktion of this LiPo-Beeper. Each Cell in the Batterrie has its pair o...
Hobby King 2.4Ghz Receiver 6Ch V2
1.Plug the Bind-Plug in the Bat/Bind Port. 2.Power the Receiver on any Channel by ESC or Batt.-Holde...
18-11 2000kv Micro Brushless Outrunner (10g)
try these: Prop adapter w/ Alu Cone 3/16x32-2mm shaft (Grub Screw Type) I'll use them on my mini...
18-11 2000kv Micro Brushless Outrunner (10g)
I bought 6 of them. 2 had very much vibrations. after changing of the bearings they are quiet. Good ...
Wiki-blog entries.

Share