Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
Ronny
Customer Type: Platinum Member
Location: Österbybruk, SWEDEN
My movies
 
Recent product discussions
ST360 Quadcopter Frame w/Motors and Propellers 360mm
Why doesn´*t the video link work... Trying again......
UAV-3000 Composite FPV/UAV Aircraft 3000mm (ARF) (EU Warehouse)
Thanks HK For restocking this model!!! New UAV on order... :-)...
Hobbyking Pulse Jet Gasoline Engine "Red Head" with Ignition System
HK Where is the V1 model to attach this motor to?? Would like to buy a ARF V1 model because I don't...
UAV-3000 Composite FPV/UAV Aircraft 3000mm (ARF) (US Warehouse)
UAV-3000 Video with APM 2.5 in auto mode in windy conditions....
UAV-3000 Composite FPV/UAV Aircraft 3000mm (ARF) (EU Warehouse)
Did my maiden flight today.... My UAV-3000 has the following setup. Turnigy G60 Motor Turnigy Super...
ST360 Quadcopter Frame w/Motors and Propellers 360mm
Very NICE! & cheap little quad! With decent motors included. No whining in motors!! Maybe depending...
NEO-6M GPS Module
I use this GPS in MY Turnigy HAL with the APM 2.5. Very nice performance from this cheap GPS!!! Look...
HKPilot Mega V2.5 Flight Controller USB/GYRO/ACC/MAG/BARO
I use this board in my Turnigy HAL Hexacopter. But I bough the card from another internet shop for s...
Turnigy H.A.L. (Heavy Aerial Lift) Hexcopter Frame 775mm
Trying the link again......
Turnigy H.A.L. (Heavy Aerial Lift) Hexcopter Frame 775mm
Video of my HAL with APM 2.5 (With some explanations what it can do...)...
Recent discussion reply
HKPilot 32 Digital Air Speed Sensor And Pitot Tube Set
The original 3DR is about the same price ($54.99) so im going for the real deal......
HKPilot 32 Digital Air Speed Sensor And Pitot Tube Set
Answer is No. This sensor will only work on the 32 bit boards as the Pixhawk, PX4 and the HKPilot32...
HKPilot 32 Digital Air Speed Sensor And Pitot Tube Set
Answer is No. This sensor will only work on the 32 bit boards as the Pixhawk, PX4 and the HKPilot32...
Micro Integrated PCB w/ESCs Quadcopter Frame 235mm (KIT)
Instruction under Files tab above...Motors wires have to be soldered to PCB in the B,C,A Holes, and ...
ACK Pro Mid-Sized Ball Bearing Brushless Gimbal With Turnigy 4008 Motors (NEX5 And GF3 Sized)
No you need a brushless controller board. I think the best is the AlexMos board....
ST360 Quadcopter Frame w/Motors and Propellers 360mm
The KK2 settings are in the video and you need to calibrate the KK2 perfectly level..BUT YOU have to...
ST360 Quadcopter Frame w/Motors and Propellers 360mm
Agree! Q-Brain was not available when i built this.. My next quad will have a Q-brain!...
ST360 Quadcopter Frame w/Motors and Propellers 360mm
My setup and part list is in this video comments, also KK2 settings in the end of the video...
Turnigy G60 Brushless Outrunner 500kv (.60 Glow)
The figures are a great help. But static thrust is one thing and flying with with different weights,...
Turnigy G60 Brushless Outrunner 500kv (.60 Glow)
16 inch 3 blade is to much on this motor for full power 3d flying on another model, but perfect for ...
Wiki-blog entries.

Share