Please confirm your location:




Public Profile
Beaufighter
Customer Type: Platinum Member
Location: Dal, NORWAY
My movies
Recent product discussions
3 Blade EP Propeller 9x7.5 / 229x191mm
There are some 3 bladed spinners in aluminium, but they are for very large sized props. You can use ...
Prop spinner 89mm / 3.5" (Four Slots)
I guess you would nned it for a 4 bladed prop?...
Recent discussion reply
Contra Rotating CR50M Brushless Outrunner Motor inc Radial Motor Mount
It does not say anywhere that you can have 26V AND 100A, it says max 100A/ 26V/ 1500W. If you intend...
Minim OSD v1.1
You can probably power it by the 5V from the BEC, but as there is a voltage regulator on the 12V inp...
Minim OSD v1.1
Sorry, see that now.. It uses the 12V to power analog side. Power it directly from flight battery, o...
Minim OSD v1.1
From the video-side you should only need Video and GND. The (up to) 12V is just a "pass through" to ...
Minim OSD v1.1
This is an OSD (On Screen Display), meaning a video overlay. You run your video signal from the came...
Q Brain 4 x 20A Brushless Quadcopter ESC 2-4S 3A SBEC
Member since early hobbycity, just after the namechange from united hobbies, so a few years.. My use...
Q Brain 4 x 20A Brushless Quadcopter ESC 2-4S 3A SBEC
Since there are 4 separate controls, nothing is stopping you from using M3 for motor 1 etc....
Turnigy nano-tech 3300mah 3S 25~50C Lipo Pack
Unit weight is 263g, shipping weight is 351g....
Master Airscrew propeller 5x3
The prop does not know if it is fitted in the front or the behind. In the time of glow motors, you n...
Turnigy 1800mAh 2S 12C Lipo Receiver Pack
Frsky RX usually accepts up to 10V standard, and 16V on HV (high voltage) series. Servos that operat...
Wiki-blog entries.

Share