USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
Pushrod
Customer Type: Platinum Member
Location: Rathnew, IRELAND
My movies
Recent product discussions
Turnigy Park480 Brushless Outrunner 1020kv
This motor is a little heavy, the plane i put this into was tail heavy so instead of adding more wei...
HK-15178B Digital MG Servo 13.5g / 1.5kg / 0.08s
Did this item come in to stock recently i was keeping an eye on them, the stock level was -1 and now...
Extra 300 Balsa 944mm (ARF)
This is the hyperion model. I bought a hyperion version about a year ago and only built a few it as ...
Turnigy Typhoon 450H 2215H Heli Motor 3550kv (450 class)
What lenght is the motor shaft...
Durafly P-51 1100mm replacement Propeller
Why does HK not just order a 1000 of these and that way they might have some stock and might keep cu...
Prop adapter w/ Steel Nut 1/4x28-M4mm shaft (Grub Screw Type)
Does this prop adapter have the threaded hole on the end of the shaft for a spinner....
Durafly P-51D Mustang w/flaps/retracts/lights 1100mm (PNF)
Is this P-51D a jit item...
HobbyKing 1500mAH LiFe 3S 9.9v Transmitter pack.
Will this fit the Futaba 7c and will the polarity be correct...
Recent discussion reply
Durafly F4U Corsair w/flaps/retracts/lights 1100mm (PNF)
they should be fine you will be ok forr space but you might have to add a little weight to the tail ...
HK-450 PRO Flybarless DFC Rotor Head Assembly
Once it is a flybarless controller it will work with any flybarless head. The DFC head is closer to ...
HK15148 Analog Servo 17g / 2.5kg / 0.14s
You can use a z bend in the pushrod or you can buy Linkage Stoppers D2.1mm (10sets)
SKU: 016-005...
Evotite CA460 Foam Safe Super Glue (Medium)
I take it you have not used this glue then Hamdhan because you cant just hold the parts together for...
Evotite CA460 Foam Safe Super Glue (Medium)
No you do not have to use a kicker but glue dries slow and when dry it is hard and brittle, if you u...
Turnigy Park480 Brushless Outrunner 1020kv
This motor will be good for your application. The motor will have more power than your stock but i d...
Otter 40A 2-3S Brushless ESC w/ 4A BEC (w/ Governor)
I am using this as a substitute in my 450 pro, Hard 3D no problem, i know the extra 2 blades on the ...
MX2 - Spare 3 Blade Prop
MX2 - Spare 3 Blade Prop = 12x9...
Aluminum Prop Spinner 58mm / 2.25inch diameter / 2 Blade
If the hole in the spinner is the same size or smaller you should be ok, if its bigger you may have ...
Sbach 342 1000mm (ARF)
I would stay away from the turniy G range it would carry to much power for this plane it would not f...
Wiki-blog entries.

Share