Please confirm your location:




Public Profile
cocopl
Customer Type: Platinum Member
Location: Jerzmanowa, POLAND
My movies
Recent product discussions
Recent discussion reply
SkyZone 5.8Ghz 200mw FPV Wireless AV Tx & Rx Set
Run at 2-3s lipo . 1000mah3s cam tx osd gives 1hour operating time ....
TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo 3kg / .06sec / 21g
If you use cross horn ball linkage placed at second hole .Same as mks ds95...
Turnigy 2213 22turn 924kv 17A Outrunner
yes it is compatibile . Set timings at midle ....
Turnigy 2213 22turn 924kv 17A Outrunner
Kv is good for 10x4,5 props and 3s lipo . ...
Turnigy Aerodrive SK3 2830 Series Replacement Shaft Set
Towerpro shafts ....
D26013MG 29.7g / 2.4kg / .08sec High Speed Micro Servo
Servo is fast as in the specifications, no problem running on 6V. There is no backlash in the gears....
NTM Prop Drive 28-36 750KV / 265W
It's good motor for phoenix 2000 at 4s lipo ....
Hobbyking OSD System (Full Combo): Main Board, Power Module, USB/GPS/IR/TEMP Modules w/Remote
its compatybile at all TX and cameras ....
8043SF Prop (5pcs/bag)
weight its about 6g ,good balanced , are a little stiffer than GWS but more slender than the APC. Th...
NTM Prop Drive 28-36 750KV / 265W
You need 20A speed controler . APC SF 11x4,7 gives 1240g trust at 18,5A on 4s Its optimal prop....
Wiki-blog entries.

Share