Location: UNITED STATES
HobbyKing RC Model HomePage RC Radio Control Help and Support RC Hobby Forum Contact our RC Hobby Support Staff About HobbyKing
RC Model Planes RC Model Cars RC Model Helicopters RC MultiRotor and Quadcopters RC Boats RC Electronics
AIRPLANES AIRPLANE ACCESSORIES POWER SYSTEMS RADIO SYSTEMS
TELEMETRY & FPV
 
 
 
 
 
CARS CAR ACCESSORIES POWER SYSTEMS RADIOS
 
 
BOATS BOAT ACCESSORIES POWER SYSTEMS RADIOS
HELICOPTERS HELI ACCESSORIES POWER SYSTEMS RADIOS
 
 
 
MULTIROTORS ACCESSORIES POWER SYSTEMS RADIOS
ELECTRONICS ELEC. ACCESSORIES
EMAIL  PASS 
TOTAL $0.00 QTY 
Planes & Parts
Helicopters & Parts
Multi-Rotors & Parts
Cars & Parts
Boats & Parts
Bikes & Parts
Scale R/C Tanks
FPV & Telemetry
Batteries & Accessories
Chargers & Accessories
Electric Motors
Speed Controllers
Robotics & DIY
Servos & Parts
Radios & Receivers
Gas/Glow Engines & parts
UBEC & Regulator
Power Systems
Hardware & accessories.
Tools
Clothing, Gift & Acc.
Sale/Liquidation

Language
Currency
USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
__lsd
Customer Type: Platinum Member
Location: Corpus Christi, UNITED STATES
My movies
Recent product discussions
NTM Prop Drive Series 28-30A 750kv / 140w
Get em for 12.10 a piece *******www . hobby king . com/buddy . asp?code=3E28F4E9-F635-456E-99D2-BA2...
FatShark Dominator 3rd Generation modular FPV System
Get em for $269 Buddy code... 1067255A-CAA0-4CD9-9143-F69496435FB8 ...
Hobbyking Sbach 340 Orange-Black Gas 30cc 1850mm (ARF) (AUS Warehouse)
need this one in the US ...
MX2 Green 3D 1400mm EPO (PNF)
What is the recommended method for straightening bent parts? Got mine today. Left wing is slightly b...
2.4GHZ 1000mW Tx/Rx & 1/3-inch CCD Camera NTSC
Is there a manual for this? I need to know the exact frequency for each channel so I can build some ...
Recent discussion reply
MX2 Green 3D 1400mm EPO (PNF)
12x750 oops ,could of swore I had the calipers set on a 100 but they where on 150.http://www.hobbyki...
MX2 Green 3D 1400mm EPO (PNF)
12x500 mm...
MX2 Green 3D 1400mm EPO (PNF)
55 inch WS, Futaba receiver will work with the servos. The ESC has a built in bec, so you don't need...
MX2 Green 3D 1400mm EPO (PNF)
I meant 13x7 sorry. The stock 3 blade is a 12x9 btw. ...
MX2 Green 3D 1400mm EPO (PNF)
I'm running an apc 13x8 with a 4s1p 2200 45c and it works nicely for 3d....
MX2 Green 3D 1400mm EPO (PNF)
Well, I got the kinks out by pouring hot (near boiling) water on it. The foam beads swelled a bit, b...
MX2 Green 3D 1400mm EPO (PNF)
the underside has the same checker board pattern with out the white....
FrSky FF-1 2.4Ghz Combo Pack for Futaba w/ Module & RX
Yes, 7U refers to the whole 7 series of transmitters. I have 3 of these. One in a Hitec, one in a 9z...
2.4GHZ 1000mW Tx/Rx & 1/3-inch CCD Camera NTSC
I've been told that a 2450MHz would be the best bet. I'm going to try a 120 degree V on 2450 and see...
2.4GHZ 1000mW Tx/Rx & 1/3-inch CCD Camera NTSC
I realize it doesn't come with one. I was wondering if there is one at all. Maybe online some where?...
Wiki-blog entries.
 

Share

Copyright Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved