Please confirm your location:



USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
mikec@aloha.net
Customer Type: Platinum Member
Location: Waimea, UNITED STATES MINOR OUTLYING ISLANDS
My movies
    
Recent product discussions
Turnigy Smart6 80w 7A Balance Charger with Graph Screen
i'm disappointed. i used it with my 104 watt 7 a psu and i get an error message. like high voltage...
Multistar Elite 2312 980KV Motor Set CW/CCW EZO Bearings, 4mm Main Shaft, N45SH Magnets (2 Motors)
i have multistar motors and they are smooth provided you have good escs. these motors should be an ...
Afro ESC 12Amp OPTO Ultra Lite Multi-rotor Motor Speed Controller (SimonK Firmware) Version 3
how do you set up a quad using opto escs? how about using all optos? ...
Turnigy Accucel-6 80W 10A Balancer/Charger LiHV Capable
the charger specs states 10 amp charging. should you charge batteries specifically lipos at 10 amp?...
10 Blade High-Performance 70mm EDF Ducted Fan Unit
having a terrible time balancing the fan. i think i have it balance but spinning it again and again...
Turnigy 4x6S Lithium Polymer Battery Pack Charger
please stock this charger in the USA West warehouse. thanks...
OrangeRX DSMX/DSM2 Compatible 2.4Ghz Transmitter Module (JR/Turnigy compatible) (US Warehouse)
i want to know, is this a good module?...
Turnigy 4x6S 400W Lithium Polymer Battery Charger
shouldn't the power supply provide at lease 400 watts and at least 40 amps since each channel uses u...
Turnigy 4x6S 400W Lithium Polymer Battery Charger (US Warehouse)
shouldn't the power supply provide at lease 400 watts and at least 40 amps since each channel uses ...
HobbyKing 105w 7A Compact Power Supply (100v~240v)
be nice if this psu's power were 150 to 200 watts. maybe they looking at the 80 watt 7 amp chargers...
Recent discussion reply
Minimoa Motor Glider EPO 2000mm (PNF)
yes but i would change to a 30 A. the motor will melt the mount. i've had 2 minmoas. a very good ...
X120 120W Touch Screen Smart 6S Balance Charger
yes especially if it requires 150 watts 10 amps ...
Afro ESC 12Amp OPTO Ultra Lite Multi-rotor Motor Speed Controller (SimonK Firmware) Version 3
how will you program the esc with no bec?...
Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA (US Warehouse)
i don't use it myself. but it maybe good if you're starting. spend time making sure this board is ...
Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA (US Warehouse)
mine didn't. only came with the signal warning speaker...
Turnigy 4x6S Lithium Polymer Battery Pack Charger
no real difference except this charger has a 6 amp charge rate vs the quattro's 5 amp. i like how t...
Afro ESC 12Amp OPTO Ultra Lite Multi-rotor Motor Speed Controller (SimonK Firmware) Version 3
what's the difference in performance using opto and ubecs with escs?...
3D Printing Pen w/Filament and Power Adapter
i wouldn't buy it if he only just talked about it....
Turnigy 4x6S Lithium Polymer Battery Pack Charger
50 watts...
Turnigy Smart6 80w 7A Balance Charger with Graph Screen
but you would have been fine with that little amp too, even if you charged 6 cells most charge 2-4 ...
Wiki-blog entries.

Share