Please confirm your location:




Public Profile
_Sergey_
Customer Type: Platinum Member
Location: Alpharetta, UNITED STATES
My movies
 
Recent product discussions
Recent discussion reply
Nylon XT60 Connectors Male/Female (5 pairs) GENUINE
This is 4mm connector. It can withstand 100A but it will be pushing a bit. 5 or 6mm bullet connector...
PolyMax 3.5mm Gold Connectors 10 PAIRS (20PC)
I was wondering same thing but I never had problem with them rotating....
TURNIGY K-Force 40A Brushless ESC
No, they can not be programmed with this card. They use dedicated K-Force card (HobbyWing)...
Woven Carbon Fiber Sheet 300x100 (1.0MM Thick)
Any epoxy is fine. You may want to sand off gloss from the plate before gluing or epoxy won't st...
TURNIGY 3A UBEC w/ Noise Reduction
You need to solder two wires (red and black) to the connector at ESC side....
Turnigy nano-tech 1300mah 3S 25~50C Lipo Pack
You need BEC (battery elimination circuit) or ESC that has BEC in it. DO NOT connect output of the b...
Turnigy 130A Watt Meter and Power Analyzer
It has no connectors. You need to pick one to match your battery and solder it....
TURNIGY 3A UBEC w/ Noise Reduction
3A amp is normal operation. 5A is for short time (servo jams, landing gear deploy etc)...
Turnigy nano-tech 2200mah 4S 25~50C Lipo Pack
5C max....
4mm Gold Connectors 10 pairs (20pc)
Much better! They have larger surface than DEANS, have higher AMP rating and much more convenient to...
Wiki-blog entries.

Share