Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!


Public Profile
Boaterguy
Customer Type: Platinum Member
Location: Ottawa,, CANADA
My movies
Recent product discussions
Distribution Board and Lighting Control Board
This is exactly the design I submitted for the hobbyking design competition about a year ago....
Multistar Vortex 285 Special Edition Racing Quad (P&P)
Is a picture of a quad smoking really a good way to promote how robust and reliable it is?...
Hobbyking SK450 Replacement Arm Set - Black (2pcs/bag)
What are the dimensions of the holes for the motor mount?...
AfroFlight Naze32 Acro FunFly Controller
Are the pads on the board for additional IC's? What can be added?...
PPM Encoder Module HKPilot 32
PPM is not processed faster than PWM in flight controllers, it takes longer to process, after which ...
Hobbyking SK450 Replacement Arm Set - Bright Green (2pcs/bag)
What is the thread of the inserts?...
Multistar High Capacity 3S 5200mAh Multi-Rotor Lipo Pack
That's a 52 amp constant discharge rate. While that is fairly high, a 2200 at this size will have a ...
Turnigy 1811 brushless Outrunner 2900kv
Are the prop adapters still included?...
Black Hawk Models Lil' (Com) Bat Control Line Balsa 457mm (Kit)
Has anyone tried making this into an actual combat wing with elevons?...
FrSky FAS-40 Ampere Telemetry Sensor (Max 40A)
Do I just plug this into the smart port and it works? Is there any required setup?...
Recent discussion reply
Turnigy™ TSS-10HM DS Micro Servo 2.2kg / 0.12sec / 10g
What do you mean by reverse configuration? If you swap the outer two wires on the potentiometer and ...
Turnigy™ TSS-10HM DS Micro Servo 2.2kg / 0.12sec / 10g
I realize you're talking heli and not multi - disregard...
Turnigy™ TSS-10HM DS Micro Servo 2.2kg / 0.12sec / 10g
This is a servo?...
Hobbyking SK450 Replacement Arm Set - Bright Green (2pcs/bag)
I don't have the arms with me, they're on the way and I want to get hardware ahead of time....
T-Rex Metal Robot Tank Chassis (1pc)
You need a brushed motor controller, turnigy has 20 and 30 amp versions. I got a 20 and it didn't wo...
900MHZ 200mW Tx/Rx & 1/3-inch CCD Camera PAL 420TVL
It's SMA...
900MHZ 200mW Tx/Rx & 1/3-inch CCD Camera PAL 420TVL
It is an SMA connector....
SK450 Dead Cat "Defibrillator" Power and A/V Distribution Board and Power Shield
There is no charging taking place, it is just a power distribution board with a 5V regulator on boar...
Dr. Mad Thrust 70mm 11-Blade Alloy EDF 1900kv Motor - 1900watt (6S) (Counter Rotating)
In a twin EDF system, it would offset the torque....
HobbyKing® ™ Go Discover FPV Plane EPO 1600mm (KIT)
I think a big 3S (5000 - 8000 mah) with a dt1000 spinning a 12-13" prop would be good, or even a dt7...
Wiki-blog entries.

Share