Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!


Public Profile
majik01
Customer Type: Platinum Member
Location: Hillsborough, UNITED STATES
My movies
          
Recent product discussions
Flyline Room Raiders - Combat Spitfire
Mode for rudder instead of elevator control. Mode the controller right stick so it becomes left / ri...
Quanum ELITE TX CAMERA COMBO Micro Cam VTX 25mW 40CH 5.8GHz (NTSC)
What could be simpler than this ... "Just plug into a little 1S Lipoly battery or onto your 5V rail ...
Turnigy Graphene 1300mAh 3S 65C LiPo Pack w/ XT60
Looks like the bee's knees for my 250 quad ... not for racing of course....
Quanum ELITE TX CAMERA COMBO Micro Cam VTX 25mW 40CH 5.8GHz (NTSC)
With a 1S power requirement, this would be perfect for "toy" quadcopters that only use a 1S ... 100 ...
Case Set For MultiWii PRO Flight Controller And MTK GPS Module
Perfect timing. Now my Pro boards will finally get cases....
MicroAces Focke Wulf 190 Micro Airplane Depron Standard Kit (ARF) (EU Warehouse)
Can HK please include all the available parts as combo items? ...
Quanum DIY FPV Goggle V2Pro Upgrade Glove (Red/Black)
Does this set include the black rigid foam housing ? Very nice if it did ... ...
Quanum Single Stick 3 Axis Gimbal Upgrade for Turnigy 9XR/9XRPro Tx's
Does anybody know if this optional upgrade is available for the Taranis? It can be moded but I was j...
Turnigy nano-tech 260mAh 1S 35-70C Lipo Pack (QR Ladybird/Genius CP/Mini CP) (AR Warehouse)
In case you are wondering, this will also work for the JJRC H22 models. Needs some foam to keep it s...
H.King Rattler 1/8 4WD Buggy (RTR) (AR Warehouse)
The Rattler arrived ... had some issues with one of the shocks popping it's cover but was sorted out...
Recent discussion reply
Quanum DIY FPV Goggle V2Pro Upgrade Glove (Red/Black)
I was able to DIY a 3.5 x magnifying lens so I can use the googles without eyeglasses or get crossey...
Quanum DIY FPV Goggle V2Pro Upgrade Glove (Red/Black)
The V 1 Googles fits very loosely inside this V2 Glove .. will it work - of course but your set up w...
Quanum DIY FPV Goggle V2Pro Upgrade Glove (Urban Digital Camo)
The Googles are meant to house the 5" monitor so you will only see a portion of the entire screen. T...
Quanum DIY FPV Goggle V2 w/5 inch LCD Monitor (Kit)
Pray tell the name/model of your HDMI receiver? If it was designed for FPV, I'm sure it would have a...
UDI-RC Free Loop U27 Mini-Quad
"Three flying modes, from beginner through to expert" .... Gyro gains can be adjusted for flying sty...
Easy Fly Glider EPO (P&P)
Interesting that it has a five star rating ... maybe it's just my imagination. FYI I own and fly on...
Turnigy 2610 EDF Outrunner 5000kv for 55/64mm
The EDF unit you will need to buy is one that has the proper prop adapter (either 3 / 2.3 mm hole) ...
Quanum Single Stick 3 Axis Gimbal Upgrade for Turnigy 9XR/9XRPro Tx's
Noircogi - can you post pictures of your Taranis? Following your post gives a good head's up on wh...
CX-31 UFO 6-Axis Gyro 3D Multirotor with Headless Mode RTF 2.4GHz (Mode 2 Tx)
Came here for the CX-31 and saw some beautiful clouds instead ......
Eagle EPP Slow Flyer 1430mm w/Motor (KIT)
Any four channel receivers can do V-Tail mixing - it is the radio that sends the mixing signal for ...
Wiki-blog entries.

Share