USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!


Public Profile
soldyman
Customer Type: Platinum Member
Location: Mihai Viteazu, ROMANIA
My movies
Recent product discussions
Hobby King 30A ESC 3A UBEC
For this ESC you can use the "HobbyKing ESC Programming Card" It's wery easy to use ,but unfortunat...
HK-250GT Electric Helicopter Kit (Alloy/CF w/ Blades)
I see the motor pinion is included but for what size of motor shaft and how many teets it has? I int...
Hobbyking FP100 2.4Ghz 4CH Micro Helicopter Mode 2 (RTF)
The TX has a plug for simulator cable? It can be conected to PC for simulator? ...
HK136 - 5 in 1 Main Control Unit
Hi!This unit can be binded to the HobbyKing HK-190 2.4ghz 4Ch Fixed Pitch Helicopter transmitter?...
HobbyKing HK-190 2.4ghz 4Ch Fixed Pitch Helicopter (RTF-Mode 2)
Anybody knows if this transmitter can be conected to PC for simulator.Thanks!...
2.4Ghz SuperMicro Systems - JR Module.
Anyone knows if this module can be bind with S-Pro FP II 2.4Ghz Micro Heli? This with the Turnigy 9X...
Recent discussion reply
HobbyKing GA-250 MINI-MEMS Gyro
Hi Johnny66! I use BMS-661DMG HS Super Fast Digital Servo (MG) on tail and i'm wery satisfied.On sum...
HobbyKing GA-250 MINI-MEMS Gyro
Hi! I use this giro on HK 600 and worging so good. I allso used hk 401 on Trex 450 and Assan 410 on ...
HK-250GT Electric Helicopter Kit (Alloy/CF w/ Blades)
Thanks my friend!I allready ordered-it and added one pinion with 13T for 2.3 shaft....
HobbyKing GA-250 MINI-MEMS Gyro
It will work allso on ESC with no problem....
Turnigy G60 Brushless Outrunner 300kv (.60 Glow)
No matter the order of wires.If direction of the motor is not good then change two wires and ready....
HobbyKing HK-190 2.4ghz 4Ch Fixed Pitch Helicopter (RTF-Mode 2)
Not eaven to open the TX and solder the wires?? But where to solder the wires?...
Turnigy AA LSD 2200mah Low Self Discharge (ready to use)
Hi! NI-MH batteries should be discharged completely before recharge. For that you should use battery...
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 1) (v2 Firmware)
Hi! I am using mono 3,5 jack-jack cable,and its working well. Allso tried with 3,5 stereo jack-jack ...
Turnigy Typhoon 600H Heli Motor 1100kv (600 class)
Its for 3~6S .That means 22.2 v max. I believe it will burn out with 8S...
Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 1)
If you want to have the booth stick slide without to return to centre you just must take out one spr...
Wiki-blog entries.

Share