Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!


Public Profile
__bare
Customer Type: Platinum Member
Location: vancouver, CANADA
My movies
Recent product discussions
Corona DS-843MG Digital High Torque Micro Servo 4.8kg / 0.10sec / 8.5g
Recieved a pair of these They ARE small Half the size of hex 500's But they weigh Twice as much .....
Carbon Fiber Propellers 5040 Self Tightening (CW/CCW) (1pair)
I cannot believe that's correct. Likely that's the Hole in the propeller. Not of the screw-on adapt...
Carbon Fiber Propellers 5040 Self Tightening (CW/CCW) (1pair)
Sooo what size motor shaft do these fit on to?...
Corona DS-843MG Digital High Torque Micro Servo 4.8kg / 0.10sec / 8.5g
What is their Real weight? Other ...9 Gram.. Coronas I bought were actually 12 grams. Decent servo...
Turnigy XK2030-5800KV Brushless Inrunner
It does not have any Cooling holes.. Not Clever....
Turnigy Servo Tester
Same unit as the 4.19$ one below .. except with a metal box? Does this unit operate a bl ESC?...
HobbyKing™ Servo Tester
Will this operate an ESC? Some review below claimed it wouldn't??...
Hobby King 4.3g / .5kg / .10sec Micro Servo
Recommend the SO 361 servo. Cheaper, Much better quality and same weight...
Glass Fiber Cloth 450x1000mm 18g/m2 (Super Thin)
Confused you did it ?? 18gms/meter ~ 0.5 oz/yard Point being that this stuff is of Markedly lesse...
Glass Fiber Cloth 450x1000mm 18g/m2 (Super Thin)
Thin Fragile and Frayed. everywhere. Half full of loose fibres.. Lo quality. At least that was My 3...
Recent discussion reply
Corona DS-843MG Digital High Torque Micro Servo 4.8kg / 0.10sec / 8.5g
This servo Hobby King S0361 3.6g / .45kg / .12sec Micro Servo is 25 x 20 x 10mm Very close to same ...
Hobby King S0361 3.6g / .45kg / .12sec Micro Servo
That suggests that one can dissasemble (cut the tape that holds it together) and replace the drive ...
FrSky X8R 8/16Ch S.BUS ACCST Telemetry Receiver W/Smart Port
you don't want the x series.. range is V poor...
Dr. Mad Thrust 40mm 8-Blade Alloy EDF 8000kv Motor - 330 Watt (3S)
Easily and Likely Very quickly...
2040 Brushless Inrunner Motor 4800kv
Might be... but it has NO cooling holes.. Not good...
OrangeRX RX3S 3-Axis Flight Stabilizer V2 (V2.1 firmware) (V-tail/Delta/AUX)
Brochure babble above states that it supports V tail and Delta :-)...
Turnigy™ MX-95E Digital Micro Servo 0.8kg / 0.09sec / 4.1g
Sadly the Blue Arrow Digital Metal gear servo strips out it's ali gear :-) every bit as easily as th...
Turnigy 20A BRUSHED ESC
Have you Read the manual (under Files tab above) and coprrectly set the Jumpers? Gotta do that First...
Hitec HS-65MG Micro Metal Gear Servo 1.8kg / 0.14sec / 12g
You should be at that price. These are Good servos they don't usually jitter unlerss theres a Rad...
Dr. Mad Thrust 40mm 8-Blade Alloy EDF 8000kv Motor - 330 Watt (3S)
Plug *n play. No need to fool with pole count settings...
Wiki-blog entries.

Share