I would go the listing of the "Turnigy 63-64-A 280Kv 65A Brushless Outrunner" which has nearly identical specs and just use those numbers. It was a popular motor with many reviews and lots of information. It has been out of stock for a while now, so I assume it is being replaced by the "Turnigy G160 Brushless Outrunner 290kv". The specs of the 3 motors are very similar - I would take them as a starting point. (I am using this motor for an electric mountainboard so I can't really help much, but t
Use a high temp glue or epoxy to mount the magnets. CA won't hold at high temps.
I mounted this engine cessna 2.10 mt of A.A. with 6.5 kg of weight, but it takes 8.5 kg with three propeller 16x10, with 8s lipo flight about 14 minutes very good, would recommend.
No comments. Reply..
mounted this in a 70" edge with a 20x10 prop, most of the outside diameter magnets have since fallen out, after gluing back in several times i have now decided to replace it with something else... quiet disappointed..