|
8/29/2010
kizza42 (85%)
Does it have prop brake?
|
|
|
 |
|
|
 |
|
8/24/2010
pilotrcuk (50%)
Hi, does anyone know if the current version of this controller (and other K-Force ESCs) support the data logging, which is accessible through the 2 in 1 Professional Programming Box? I know the 150A 6S ESC does NOT support this, but I believe the others in the range originally did, though I don't see that on the spec above.
|
|
|
|
|
|
|
|
8/21/2010
ePower (84%)
What kind of adapter do I need to use the pc USB port to program the Turnigy K-Force series?
Standard USB cable or a special Turnigy adapter?
|
|
|
|
|
|
|
|
|
8/21/2010
pavcon (29%)
HAs anyone tried this ESC witha high RPM motor like the hoffman Magnetics the BEast and a 5S ? ? ?
|
|
|
|
|
|
|
|
|
8/6/2010
Sir Blacky (84%)
Hello
i want to buy this esc but i dont need the bec.
can i turn off the bec? What must i do for it?
greeting
|
|
|
|
|
|
|
|
6/22/2010
wan42060 (67%)
Just ordered this esc, but wonder how I should set i up for my trex600 esp when it arrives.
with timings ect...
any surgestions?
regards
Wan42060
|
|
|
| |
|
express315
(79%)
It may survive on Trex600 but you will be limited
to a mild sport flying, no hard manevers.
Start with 15 degrees on timing.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
5/6/2010
jacost (50%)
Hi , wonder if anyone could give some advice concerning the turnigy K-force 100amp speed control. I just got the controller, and for 2 flights it performed as expected, now suddenly it won't give full throttle! When you give full throttle the motor will start to pulse, and you can only regain some throttle if you pull the stick right down. Now it works only up to 70% throttle even when cold and with fresh turnigy 3300mah 30c 4cell pack. As long as you use only 70% throttle, it works fine. The set-up is as follows: Het typhoon 1w-30 motor in a HET 6904 fan, drawing 85 amps at full throttle. now the controller can only draw 55 amps, anything more than that and it starts pulsing! I have tried variuos settings ei: timing, PWM, throttle range, all to no avail! Please help!
|
|
|
| |
|
socomon
(67%)
It is hitting low voltage cut-off. Check what voltage the LVC is set to and check your batteries to be sure they are up to the amp load you are drawing.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
jacost
(50%)
I have set the LVC to soft cut, and the cut-off to middle. The battery holds it voltage at 13.4v at full load.I have also set the cell count to 4 on the controller. The controller work fine for two flights!- With same batteries!
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
jacost
(50%)
have send it back for replacement, new one on its way. Hobbyking warranty works!
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
5/4/2010
mat-industries (60%)
Sorry for this question, but i have recived the esc, and it looks very good. But i have only one 3pin connector as bec. How i connect this esc with a PC to programm it ???? Any suggestions ??? I have the new one with the blue case. Thanks for help.
regards Martin
|
|
|
| |
|
marell01
(68%)
You need the programbox to do that. You can find it here *******hobbycity****/hobbyking/store/uh_viewItem.asp?idProduct=8996&Product_Name=Turnigy_2_in_1_Professional_Program_Box_for_Brushless_ESC_
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
3/25/2010
alergigo (63%)
25 march and thanks god it ,s arrive.
let see how works!!!!
|
|
|
|
|
|
|
|
|
3/24/2010
pilotrcuk (50%)
Hi, there were some hardware issues with these (and the HobbyWing Platinum series - same thing) last year. HobbyWing have reintroducted this line and called them Platinum Pro, and now feature a blue anodized case for ease of telling the difference. Have Turnigy done the same thing, has the hardware been updated in line with the HW controllers? Can you gaurantee us that your new stock is the new product? Is the case different? Thank you!!
|
|
|
| |
|
McDon
(60%)
Yes, just got 3 last week and the case is anodized blue on all. I am still flying old stock with black case in a 6s 1400watt setup and using onboard bec with 5 standard size servos, with no problems. All the talk of fires had my feathers in a twist, but not experienced any problems.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
express315
(79%)
Beside the blue heatsink when you connect the ESC to PC
it is recognized as HW3.0 hardware with 1.5 firmfare.
while previous versions (Black) were HW2.0 hardware with
1.3 firmware, which I personally liked better.
|
|
|
This customer was awarded a credit for their answer.|
Was this the best answer? YES | NO
|
|
| |
|
pilotrcuk
(50%)
Thanks express315. Can the firmware be flashed back to v1.3 on the newer hardware?
Can I use the HW verison of the Programming 2 in 1 box/interface with these?
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
3/24/2010
rami2r (65%)
Guys, why would not this work on rc cars? I mean if I dont want reverse, I think it would work right? as long as it is proportional it should work. please help....
|
|
|
|
|
|
|
|
|
3/17/2010
alergigo (63%)
17 march and this is NOT COMING
we will get crazy or what!!!
|
|
|
| |
|
alergigo
(63%)
23 march,and still don,t have any information about when they will get it again.
hk just said, please wait more. if not you can cancel your order..
se esta convirtiendo en esto obby city. el no poder decirme mas o menos un dia. no es normal que lleven 3 meses... me cago en su madre. 3 meses llevo esperando, para un variador,
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
2/16/2010
alergigo (63%)
maybe i don,t have the news update, but, you still working with this ESC HOBBY KING?
when will arrive this esc again hobby king???
please i need a answer, because i,m waiting for 2 MONTHS, and i have a lot of items waiting.
COME ONNNN!!!!!!!!!!!
16 FEBRUARY 2010
|
|
|
| |
|
alergigo
(63%)
1 march and still don,t have a answer about this item,, not good support in this one. it looks like they have it forget.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
alergigo
(63%)
7 march 2010
and no information about what,s going on with this item..
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
1/31/2010
alergigo (63%)
for 1 mont ago and it isnt arrive
when will be availabe again
31-01-2009
thanks hk
|
|
|
| |
|
alergigo
(63%)
please hk!!! can you tell us when will be stock again
waiting for a little
thankss and fly
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
alergigo
(63%)
10fbruary 2010, and waiting for a answer please hk!!!
waiting for 1.5 months
are you going to have it again?
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
1/14/2010
evonut (60%)
hey guys i have a 1/16 erevo was wondering if this esc will work on a rc car thanks
|
|
|
|
|
|
|
|
|
1/14/2010
evonut (60%)
hey guys i have a 1/16 erevo was wondering if this esc will work on a rc car thanks
|
|
|
|
|
|
|
|
|
12/31/2009
marioverburg (55%)
When wil the 60 and 80 Amp version be back again.
|
|
|
|
|
|
|
|
7/25/2009
Alt-F4 (82%)
You can download the manual here:
www hobbywing com/upload/manual/HW-01-PL.pdf
|
|
|
|
|
|
|
|
|
6/27/2009
NEPTUNESP2H (47%)
Hi, I have one of these and it works ok when connecting it to the RX via the throttle cable, but do i need to cut the positive to use a separate battery for the RX?
NEPTUNES
|
|
|
| |
|
Jason5001
(4%)
No need to cut, just carefully unplug from the connector.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Radio man
(30%)
If you don't cut or remove the red cable, the esc will be fried.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
alergigo
(63%)
hello, i will like to buy and use this esc with separated batery for rx like NEPTUNESP2HA.
But if we take out the red cable from esc that goes to rx, it,s is 100% safe?
Jason5001, can you explain just a little, why we must separate the red cable (red,white and black from esc that goes to the rx)if we want to use a eparate batery!!!and why we will fried the esc if we don,t get out the red one..
somebody check that the real weight are 82 grams?
happy new year for everyone!!!!
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
express315
(79%)
Keep v1.03 firmware otherwise you loose 24 khz PWM choice. In v1.05 it is limited to 12 khz only.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
evonut
(60%)
hey guys i have a 1/16 erevo was wondering if this esc will work on a rc car thanks
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
evonut
(60%)
hey guys i have a 1/16 erevo was wondering if this esc will work on a rc car thanks
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
evonut
(60%)
hey guys i have a 1/16 erevo was wondering if this esc will work on a rc car thanks
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Helicoy
(42%)
This will work for 8S Lipo ?
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
