Prop adapter w/ Alu Cone 3/16x32-3mm shaft (Grub Screw Type)

Total of 6 discussions.

yfl211

103 points - 9/12/2012

Does this fit a 3 mm motorshaft or a 3.16 mm motorshaft ?

AshJR7202

112 points

This is for 3 mm motor shaft and will not fit 3.16mm

glenn_mech

315 points

if you order it already theres nothing you can do except for trying...i think 0.16mm can be hold by grub screw..

jteee

241 points

To suit*
3mm Motor Shaft.
3/16x32 Propeller Shaft.
Alloy adapter with grub screw and alloy end cone.

You could try to drill out the shaft.

Podds

3 points - 4/25/2012

Newbie question: What does 3/16x23 mean? Please explain?

Dangerman

121 points

It means 3/16 inches by 23mm. I'm guessing the 3/16 (nearly 5mm) is the propeller shaft diameter and 23mm is the shaft length.

RoboSerg

20 points - 12/19/2011

Does it come with all FOUR grub screws ?

dibedu

117 points

yes. it comes complete

Heppy Ket

381 points

Complete it is, but to answer you question, there are only two grub screws.

Roromix

16 points

On the picture, there are 3 cone, but i have received only one.

Dangerman

121 points

* Roromix in the description it says "1pc only", the other two are different sizes, I'm guessing 2mm and 4mm.

jteee

241 points

As stated in Item description
To suit*
3mm Motor Shaft.
3/16x32 Propeller Shaft.
Alloy adapter with grub screw and alloy end cone.

1pc Only.

This the 3mm shaft cone.
HK sells the same adapter for different size shafts.

scaro13

20 points - 5/8/2011

Is it APC-compatible?

floydbh

94 points

you have to enlarge the role! but, it is compatible!

david in japan

136 points - 7/26/2010

will this fit gws 6 and 7 inch props?

quesnes

154 points - 6/21/2010

What is the lenght of the prop shaft plaese ?

Firedog

138 points

Length is 20mm.

jteee

241 points

As stated in item description
To suit*
3mm Motor Shaft.
3/16x32 Propeller Shaft.
Alloy adapter with grub screw and alloy end cone.

1pc Only.
Length of prop shaft is 32mm.
Firedog good answer, not.

Customer Reviews

Overall Rating		DOCA-SP 2074 likes
Value	UNRATED
Quality	UNRATED

7 thumbs up!

Bom adaptador de helices... a melhor opcao agora que a HC nao esta tendo mais prop saver.

1 comment. Reply..

Overall Rating		DOCA-SP 2074 likes
Value	UNRATED
Quality	UNRATED

6 thumbs up!

Bom adaptador de helices... funciona bem

2 comments. Reply..

Create an account

Overall Rating		airwolf 43 likes
Value	UNRATED
Quality	UNRATED

6 thumbs up!

Der Adapter ist leicht und stabil.

No comments. Reply..

Create an account

Overall Rating		Wojtass_nt 147 likes
Value	UNRATED
Quality	UNRATED

2 thumbs up!

Those shafts are not good. They are not balanced well and screves are bad quality.

3 comments. Reply..

Create an account

Overall Rating		mtdoramike 45 likes
Value	UNRATED
Quality	UNRATED

2 thumbs up!

These are good prop adapters for the money, but make sure you tighten, check and tighten again before each flight or you will lose you prop and adapter. I wound up notching the motor shaft slightly on each side for the set screws to get a better hold when tightened. This seems to have solved the problem.

No comments. Reply..

.....click here to see all reviews

Prop adapter w/ Alu Cone 3/16x32-3mm shaft (Grub Screw Type)

Propeller adapter. To suit;3mm Motor Shaft.3/16x32 Propeller Shaft.Alloy adapter with grub screw and alloy end cone. 1pc Only. PRODUCT ID: GS0162M

Propeller adapter.

To suit;
3mm Motor Shaft.
3/16x32 Propeller Shaft.
Alloy adapter with grub screw and alloy end cone.

1pc Only.

PRODUCT ID: GS0162M