HobbyKing Online R/C Hobby Store : TIG 600mm Carbon Fiber Z-Weave

View all comments | (8 threads)

Ask a question

15/03/2010
TrevJonez (80%)
what is with the white on the picture is that on both sides? is it removable?

Petr (7%)
Hi "the white" is a painting on top side. Bottom is black (carbon fiber pattern)

strong (25%)
The white is only on the topside. It cannot be removed as far as I can see, because it looks like it's painted.

4/12/2009
nowinkk (85%)
Why is this 600mm blade more expensive than its 690mm elder brother that has just come into picture?

21/11/2009
Burnaby (75%)
Just got my set which did not come with the washer/spacers in the pic. Do they come with them?

strong (25%)
Mine also did not come with washers/spacers. I use them on a T-rex 600NP, which doesn't need the washers/spacers as shown in the pic.

7/07/2009
dangerous (62%)
later i used for my raptor 50 but now i put on my TreX600 2000 rpm over, very stability for fly 3D.

4/05/2009
Rullegris (43%)
would be nice to know the max headspeed they can handle, as mentioned the old ones were not secure.

ketnet (72%)
2200 rpm... a bit overrated...
shorter flight time and almost no added value to 2100 or even 2050.
A friend of mine flies them at 2200 rpm so no problem i would say.
I fly them at 1850, more then enough for me now.

dangerous (62%)
i always fly 3D for my raptor and very stabel but i am not sure howmuch about rpm.

Rullegris (43%)
What headspeeds do you run them with, can they handle 2200 rpm?

the old hobbycity 600mm blades kinda fell off in the air, smashing the heliocopter to pieces...

Sauter (70%)
is dis Blade for T-rex600E

ppxav (86%)
seems it fit the rex 600E
cheers
xav

strong (25%)
I used them on a t-rex 600NP, so I guess You can use them on a t-rex 600E aswell.

Click here to see all comments