Flat 26AWG servo wire 1mtr (R/B/W)

 __dawg 16 points

found answer thanks

 srobi 1 points

If you need you can buy more than 1 meter and won't be cut

 PCH56 67 points

And so what's the answer ? This could be useful for other... like me!

 PCH56 67 points

Get the answer as well: by the meter!! www.link

 e_lm_70 487 points

Yes, if you order 3 meter ... you will not get 3 cables of 1 meter each ... but only 1 cable long 3 meter ... but ... I will not be so sure that if somebody order 50 meter, he will get 1 cable that is 50 meter long *-p

 DennisT1 163 points

Suggest substituting SKU: AM-1306-26. Yellow instead of white signal wire* no functional difference. Alternately, you could upgrade to 22AWG in your choice of color. Those are all in stock at this time.

 smartguy 278 points

i have bought this but i remove it and replace with the AM-1306-26 and today my packege arrived to my country

 Snehal Samar 4 points

Use servo wire instead for that 26 awg wire if the item is back ordered. the one used to extend servo wire in hxt 900..this may save your time. ASk the customer care to edit your order.

 waterlogged 2842 points

I just ordered 5 metres 4 days ago and it's in stock. Be quick before it's sold out.

 DennisT1 163 points

No idea on ETA, but there is several similar items you could use in its place* for example with yellow instead of white wire or 22awg wire in either color combination.

 pousa 6 points

Muito bom cabo, atendeu as minhas espectativas.

 RexSe7en 14 points

Best servo wire there is! Looks clean and is inexpensive!

 Shimano 11 points

They are great quality. You cant buy the wire and crimp pin set to make them any cheaper than they are here! I only wish they would make another category of extension wires with heavier gauge wire for High Voltage servo's

 wolfes1126 3365 points

Hi Alexei14,
Just order them while on Backorder, i got mine orderd on Backorder, and they arrived/got packaged and shipped within 2 Weeks, If you Preorder and pay you be 1 of the 1st to get them when they arrive
Licke this Info? Please let me get rewarded. Thank you

 DennisT1 163 points

Try this one: AM-1306-26. Same thing with yellow instead of white signal wire. Alternately, if color is an issue but not weight, the 22AWG is in stock in your colors. Little heavier, not quite as cheap, but stronger.

 dino4433 50 points

In urgent time, use s**** printer cables, just strip off 3 from the ribbon wire and mark each for color coding,make sure you don't get mixed up.

 Joe 23 points

they usually will be restocked within 30 days. U can use another 22awg wire in its place just run 3 together.

 Shonen 69 points

just solder it...

 Radioactive 107 points

Yep, totaly agree!!

 Fusion 481 points

Just solder them, The crimping tools are expensive but i agree it would be good if HK could do us one but not too cheap on the quality please.

 KESTAS 29 points

yes of course

 tedesco 12 points

Unfortunately HK does not sell the crimping tool. I use to solder the cable in the connector, taking care to remove the excess part on the sides and using very small amounts of soldering wire.

 SZannis 18 points

Soldered one yesterday. It is not the easiest soldering job that I have done. It needs patience.

 Hamdhan 155 points

They do sell it

 tramsgar 251 points

Get the 347000001, it is an excellent tool for the purpose and a very good investment.

 Fusion 481 points

2 years later... glad you are listening to us eventually HK. I will buy one in my next order. Thanks for the heads up guys/gals.

 SZannis 18 points

It seems that I will buy one sometime.

 Shonen 69 points

yes, it's stranded. 26AWG is 'officially' rated at 2.2amps max in installations, although in RC we can get away with a bit more since there's airflow over our wires. I'd keep it under 5A or so though.

 KESTAS 29 points

no its straight

 tedesco 12 points

Yes, its stranded. It's acceptable to use this cable to 1.5A at 6V. Some guys use it to 2.5A at 6V, but it became hot in this situation.

 hess2007 401 points

It's better the yarn, because connectors can go wrong contacts

 slimage 70 points

thats what I do my EDF 16 has no room for plugs just solder straight to servo

 Cedric-Be 37 points

Yes, for sure

 KESTAS 29 points

On my opinion it better

 OldSkoolKool 2841 points

You will get 1 piece of 26awg servo wire 5 meters long.

Travis
02/06/09

 Patrik 12 points

5m in one piece