USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
I brought 1 of this servo for testing, during second time i use,the plastic gear slip,connot funtion at all. just want to check with hobby king,is there any spar part for the gear (plastic or metal)?? i prefer change it to metalif u got. (brought this servo just use for two times))
would this work with any gyro ? im intending to buy one for my raptor 30 which i will be using a CSM 540 gyro but not sure if this would work with it ?
It will work for 4.8v and more speed for 6V ! good for tail Helico !
Customer Reviews
Overall Rating
Gunnar
likes
Value
UNRATED
Quality
UNRATED
14 thumbs up!
Recived my batch of suposedly HXT 9866 Digital Metal Gear 45g / 7.2kg / .09sec, hard to tell as no marking at all on servos, but seems decently fast on 4,8volts. No slop at all in this servo when new to speak of. Useing it for cyclic in .40sized heli, and it seems to have no problems doing this task, both resolution, centering, speed, and torqe are above all whats needed.
Comes with one 'car' T-horn and one 4-way X horn, 4 grommets and wood screws. Servo horns are pre drilled with diffrent sizes, makeing my usage impossible as holes i wanted to use to big(used futaba horns instead=ok) Servo wire are more like 200mm then 300, worked for me, this is a car servo? looks so.
Important note: All screws holding servo together are not completly screwed all the way in, there is ~0,5-1mm space left for the screws to be screwed in! servo might seperate in use if not done! All servos i recived was like this. Servo seems to be 'glued' also to make it splash water resistant.
relly Good/great servo all in all.
1 comment. Reply..
Overall Rating
Bjorn Friberg
193 likes
Value
UNRATED
Quality
UNRATED
12 thumbs up!
Got 5 servo to my JR Vibe 50 heli, one get very hot with a delay when reaching the center position, send it back for replacement. The other four was ok, very precise and strong. All of them was VERY noisy at the first 30 min. but after a while the noise gradually stopped and now it is only a week bzzz from one of them. Check the four screws at the bottom, none was not completely screwed to the bottom at any servo.
No comments. Reply..
Overall Rating
Ramon Molto Salvador
likes
Value
UNRATED
Quality
UNRATED
11 thumbs up!
I've mounted 2 for elevator and 2 for rudder in a GreatPlanes Yak 54 2,05 m and they seem work very well right now.
No comments. Reply..
Overall Rating
Ernesto Gil Tesa
likes
Value
UNRATED
Quality
UNRATED
10 thumbs up!
Es un servo fantastico, funciona a la perfeccion en la cola de mi raptor 50 titan en combinacion con el giroscopo de futaba 401.
No comments. Reply..
Overall Rating
Ralph van Zandt
likes
Value
UNRATED
Quality
UNRATED
10 thumbs up!
Very good servo, very fast, although a little noisy....Placed it in a Raptorv2 on the swash and pitch and they work like a charm...A big plus concidering the price ....
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
