Location: UNITED STATES
HobbyKing RC Model HomePage RC Radio Control Help and Support RC Hobby Forum Contact our RC Hobby Support Staff About HobbyKing
RC Model Planes RC Model Cars RC Model Helicopters RC MultiRotor and Quadcopters RC Boats RC Electronics
AIRPLANES AIRPLANE ACCESSORIES POWER SYSTEMS RADIO SYSTEMS
TELEMETRY & FPV
 
 
 
 
 
CARS CAR ACCESSORIES POWER SYSTEMS RADIOS
 
 
BOATS BOAT ACCESSORIES POWER SYSTEMS RADIOS
HELICOPTERS HELI ACCESSORIES POWER SYSTEMS RADIOS
 
 
 
MULTIROTORS ACCESSORIES POWER SYSTEMS RADIOS
ELECTRONICS ELEC. ACCESSORIES
EMAIL  PASS 
TOTAL $0.00 QTY 0
Planes & Parts
Helicopters & Parts
Multi-Rotors & Parts
Cars & Parts
Boats & Parts
Bikes & Parts
Scale R/C Tanks
FPV & Telemetry
Batteries & Accessories
Chargers & Accessories
Electric Motors
Speed Controllers
Robotics & DIY
Servos & Parts
Radios & Receivers
Gas/Glow Engines & parts
UBEC & Regulator
Power Systems
Hardware & accessories.
Tools
Clothing, Gift & Acc.
Sale/Liquidation

Language
Currency
USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Planes & Parts > All Models
> Planes & Parts > Beginner/Trainer
> Planes & Parts > Parkfly & Indoor

  RATED:

EPO 182 With LED Lighting (PNP) (UK Warehouse)

EPO 182 With LED Lighting (PNP) (UK Warehouse)
EPO 182 With LED Lighting (PNP) (UK Warehouse)


This tough EPO Mini 182 PNP is packed with features that will appeal to both the new and experienced pilot. The powerful motor and large SF prop combo give the 182 plenty of power when needed but also excellent slow fly capability and the pre-fitted flaps will ensure low landing speeds. Other features that make this neat scale model easy to live with include a linked steerable noseleg, which is sprung to help with less than perfect landings and a huge magnetic battery hatch.
 
The Model requires no glue to finish, simply bolt on the tail and main wing, connect the flaps, ailerons and wing nav lights (the nose-lights are pre-installed) and you are ready to go! Simply connect to a 6 channel reciever and install your choice of Lipoly battery.
 
In addition to all the scale detail, Oleo front landing gear, landing & nav lights and flaps, you can also install the optional float set for yet another dimension to your flying!
 
Spec.
Material: EPO
WingSpan: 928mm
Length: 723mm 
Propeller: 8060
Wing load: 45.6g sp.dm 
Flying Weight: 584g
Motor: CF2812 1400kv Brushless outrunner 
ESC: 20A w/BEC
Servos: 9g x 4
 
Features:
Flaps
Nav Lights
Sprung Front Oleo Leg
5~6 Channel (elevator, rudder, aileron, throttle, flaps, lights)
 
Required.
Your own 6 Channel TX/RX
1300mAh 3s Lipoly Battery 
*Note: Floats sold separately.

PRODUCT ID: CES182-PNP

This product available from a warehouse near you!

2 1:IC/2:Elec 4 Channel 928mm (36.54in) 723mm (28.46in) 584g (1.2848lb)
2081g Back warehouse: 0 0 $95.68
Email Buddy Issue Price War
battery
  • Turnigy nano-tech 1300mAh 3S 45~90C Lipo Pack (UK Warehouse)

    Combo Price: $13.19   IN STOCK

  • Turnigy nano-tech 1300mah 3S 25~50C Lipo Pack (UK Warehouse)

    Combo Price: $9.97   BACKORDER



Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
 Customer rated 4 crowns   
 
Be the first to ask a question.
Customer Reviews
Overall Rating
mightybubble
3 likes
Value
Quality
Like it?
ok received this today, arrived well packed and undamaged. on first inspection the white wire to the ESC is split in several places. the plastic holes inthe top of the cabin that you plug the front of the main wing into is off centre so needs to be removed and reset. couldn't get a wing honding bolt in due to excess glue possibly same with one of the bolts for the main landing gear. the boots that you fit the wheels into do nut like up properly with the undercarriage so you'll have to remove and re-glue the wooden mounting plate. ESC also comes with female xt60 connector so turnigy1300mah 3s wont work unless you change connector. apart from that a nice looking plane and cant wait to see how well it fly's.


No comments. Reply..

Overall Rating
Ditcha
23 likes
Value
Quality
Like it?
Ok came fitted with a male XT60 no big deal just swapped it out mystery as to why they have done this. As for the plane erm some good points and some very bad ones.The good to me anyway the led nav lights are a very nice touch and work well,magnetic nose cowl handy nice finish to fuselage and main wing ,Looks realy nice and scale ,carbon fiber strip in main wing. The Bad servos on wing chatter like crazy easy swapped I guess one was not glued in anyway so I would check this,only two nuts supplied to hold prop on you need 3 ,Horrible foam nosecone that does not fit anyway,Paper thin elevator you can almost see through it ,not sure about the nose gear looks like it would rip out on a grass landing we shall see .Flight Characteristics not a supercub mini for sure I could not recomend for a novice but is fun to fly and I guess thats what its all about 3.5 out of 5


1 comment. Reply..

Overall Rating3/29/2013
Gordon
1 likes
Value
Quality
Like it?
This plane is amazing. Looks great, lots of scale details. No faults, and made of strong epo! Many say the ESC comes with the wrong xt60 connector, but mine came corrected. I would highly recommend this products to beginners and all the way up to experienced pilots!


No comments. Reply..

.....click here to see all reviews
 
Aff. Link

Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved