More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short, less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
Unfortunately with other big brands, numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries: -Power density reaches 7.5 kw/kg. -Less Voltage sag during high rate discharge, giving more power under load. -Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly. -Greater thermal control, pack usually doesnt exceed 60degC -Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load. -Higher capacity during heavy discharge. More than 90% at 100% C rate. -Fast charge capable, up to 15C on some batteries. -Longer Cycle Life, almost double that of standard lipoly technology.
Great battery only problem only in stock once every 3 months and only seem to get 10 of them. You would think they would stock more in the USA but NOOO they can get more money making u buy it from China and HIGHER shipping charges!
I am interested in buying this battery for my as yet unpurchased Losi 22 RTR. What is the procedure for connecting the wires to the battery itself? I understand that I will have to add my own connector (in this case an EC3 to mate up with the EC3 on the Losi 22), but I am unclear what needs to be done on the other end. The picture shows just banana plugs and then corresponding holes on the battery. Do I need to tape over these connections once the banana plugs are fitted in?
So i bought this battery for my Traxxas Rustler VXL and they really surprised me. So much power throughout the whole run time it's popping wheelies all the way up to full speed dont know how it will last for the full life of the battery though :/ if anyone knows how well they hold up after alot of runs let me know please
If you are going to run this as a Dual Lipo setup, which will give you appx 16 VDC in series (Avg 4 VDC per cell). These batteries can provide 348 Amps in short bursts, and a continuous current of 174 Amps. This should be wayyyy more than enough to handle any application for your RC8B.
I bought these batteries for my savage flux hp and my savage xs it fit with both of my rc it has plenty of power to do wheelies on command.
Arrived quickly from the USA warehouse, balanced fine, charged perfect and run great in my scrt10. Great batteries and great value from HK!
No comments. Reply..
I bought 2 of these batteries for my e-maxx and they fit perfect. Both batteries balance great and I get about 1 hour of run time. This is by far the best battery I have ever bought.
1 comment. Reply..
Great value for the money. I run these in a Losi XXX-4 and my Associated TC4. The Losi has a 7000kv Sidewinder in it and the battery barely gets above air temperature. Charging them at 2C the battery never gets above 70F. I'll getting more of these.
No comments. Reply..
Great batteries, I run them in Slash 2wd, 4wd and Rustler. Plenty of power and can run all night without charging.
Very nice batteries. wired ends of the connectors were already tinned with solder and fit perfectly into my EC3 connectors. Came about half charged, and is capable of charge rates of 5C. So far I am loving this battery. Broke my trucks before batteries died. I did also sticky tape LV alarms onto these as a safe guard. Highly recommend.