Hextronik MG-14 14g/2.2kg/0.11sec aircraft servo (USA Warehouse)

Total of 4 discussions.

Ken

7 points - 5/3/2012

If i bought a extended servo arm intended for a HiTec 65-MG, would it fit on these servos?

NHPILOT

103 points

I actually tried a HiTec servo arm on mine and it did not fit.

BEST ANSWER CREDIT AWARDED

Tryin2fly

263 points - 4/14/2012

I think I ask this before but are ALL the gears metal? I have used alot of the now 380 BMS used to be Bluebird really a good servo but it has one plastic gear that lets go after awhile(Looong while)but replacements r always BK lookin for a new All around standered to replace them with
Thanks

chanyote66

60 points

Yes, all gears are metal

BEST ANSWER CREDIT AWARDED

Tryin2fly

263 points - 3/5/2012

Hey would these be a good choice for HK 500 heli? Thanks

joshua

2 points

Because of the size of the 500 a 14g servo will most likely be a bit small the torque put on the motor even though it is a metal gear survo

serial0l0

18 points

How about for a HK450GT Pro? Thanks.

james

5 points

SMPRC

103 points

If the stated Deadband is really 10uS then it is NOT a good heli servo nor airplane servo either IMHO). I suppose if all you do is 'bang sticks' when flying, you'll probably not notice the lack of response to small stick inputs. Too bad

Fragmaster

1 points - 2/14/2012

Are all of the gears in this servo metal? I don't want to find out that only the horn gear is metal.

Rubnorris

126 points

Yes, I have some and they can take some abuse. Very strong!

BEST ANSWER CREDIT AWARDED

cperritte01

17 points

Yes, I opened one of mine to check when I purchased these and they are all metal gears, a combination of alloy and brass gears.

Customer Reviews

Overall Rating		rtwannab 5 likes
Value
Quality

Like it?

Great little servos. They can take a good amount of abuse and keep on tickin. Running these little bad boys in my VW monster beetle as well as my custom built 4 channel delta wings. I will be getting quite a few more of these.

No comments. Reply..

Overall Rating		Terry 12 likes
Value
Quality

Like it?

Bought 4, used in 48" EPP plane. Outstanding!! Excellent centering, strong and quick. Just ordered 16 more!!!

No comments. Reply..

Overall Rating		james 4 likes
Value
Quality

Like it?

put these (3) servos on the cyclic for HK 450 GT PRO they work great fast and accurate have a little noise but not like you hear them in the air they work great I WILL BE buying more without a doubt cost about the same as HI TEC HS- 55 from my local hobby shop but they have plastic gears and are even more noisy and not as quick I couldn't be happier with them!

1 comment. Reply..

Create an account

Overall Rating		Ghost Plane 13 likes
Value
Quality

Like it?

Great servos. Put them in my Sbach 342-30e. Pretty fast little servos. I'd buy more.

No comments. Reply..

Overall Rating		chuckstarck 20 likes
Value
Quality

Like it?

What a strong servo. I Just had to take one apart and was I surprised. Metal gear servo, ALL METAL GEARS, ALL OF THEM. There is always a nylon/plastic/whatever one in the bunch, not here. It pinched me with the servo cycler, a standard normal size servo would stop, this one just went on and pinched me hard.

No comments. Reply..

.....click here to see all reviews

Hextronik MG-14 14g/2.2kg/0.11sec aircraft servo (USA Warehouse)

Hextronik MG-14 Metal gear servo MG-14 Weight: 14gDimension: 23*12.2*29mmStall torque: 2.2kg/cm(4.8V )Â2.5kg/cm(6V)Operating speed: 0.11sec/60degree(4.8v), 0.10sec/60degree(6v)Operating voltage: 4.8-6.0VDead band width: 10us PRODUCT ID: MG14

Hextronik MG-14 Metal gear servo

MG-14
Weight: 14g
Dimension: **2312.229mm
Stall torque: 2.2kg/cm(4.8V )Â2.5kg/cm(6V)
Operating speed: 0.11sec/60degree(4.8v), 0.10sec/60degree(6v)
Operating voltage: 4.8-6.0V
Dead band width: 10us**

PRODUCT ID: MG14