Corona DS339HV Digital Metal Gear Servo 5.1kg/ 32g/ 0.13 Sec

 dylan12088 2 points

Hi, yes It does!

 mick fly 46 points

Hi there. measure the size of the one you are replacing, match the size and get metal gears and hi torque for buggy's. hope this helps.

 crazycarmaniac 159 points

i recently got my buggy to exceed 140 kmh and steering has gone down the drain at thjose speeds it the reason I need a stronger servo

 carlos 19 points

peudes usar estos para un 500 sin mayor problema, yo pretendo poner estos servos en un 600 con mootr 55 y espero que nohaya problema ya que he visto helis volar con servos standar completamente

 Gary 2963 points

Cannot see a problem with these,torque is fine,anything over 4.5kg is good,may have to ease the servo holes a touch as these are a tiny bit longer than some of the servo's recommended for a 500.

 Zerolizer 8 points

no, this is too big. you want a mini/park servo like the TGY-306G.

 Zerolizer 8 points

correction....this will fit the 450 pro tail servo mount, but it is too slow. you want something that is .09s or faster. the servo I mentioned above(TGY-306G) will work fine but is smaller than the stock mount. (the bolt holes line up and work, just a slight bit too short to reach the other side. Having the TGY-306G bolted on one side holds well so far...helps that its a metal case servo) the black tail servo mount sold under parts for the 450 pro here would fix the size issue for the TGY-306G.(if it is a problem for you or anyone that may have bought a servo the size of the TGY-306G. hope that helps, and sorry for the miss information on the first reply.

 Boon34 13 points

Thank you very much

 merv,watson 18 points

there is an adjustable arm in the pack that comes with the servo, that should give what you need.

 THERAMMSTEINER 6 points

yeah there is..

 Michael T. 17 points

...The Corona servo is 25 splined just like the Futaba servo. Should have no problem finding those on-line. HobbyKing sells them as well...

 THERAMMSTEINER 6 points

it is so small servo... not for 1/10 cars... it is for helis or smth..

 Diogen151 82 points

238 is lighter and is easy to fit in small plane. 339 have harsh gear movement, so I prefer 238 .

 CAN 400 points

I prefer 238 also for about 4-5kg torque working,, but if you want stronger than this is not ur want u must look more strong than 238, this is not.

 Diogen151 82 points

this is good choice for throttle servo, use plastic link to avoid interferrence!

 SLIDERTOUITA 11 points

it's the best servo i tested with more than one plane aerobatic scale and war bird.good quality for a little price

 Richie's Rc 33 points

Hi, These servos are not standard size and are smaller and you could do with a bit more torque. Check these at the same price. Corona 538MG Digital Metal Gear Servo 7.0kg/ 53g/ 0.13sec. Hope this helps