Turnigy 3D Gas Wood Propeller 17x6

 Gary 2959 points

They are listed as a 3D prop but it is usually better to go with a larger diameter,finer pitch prop for prop hanging,which size engine are you using?

 sonerai 17 points

Hi Gary,I have the JC beam mount 23cc in the SBACH 342 profile with a JXF 16x8.What would your recomendations for prop. be for this combo.

 Gary 2959 points

I personally would try the 18 x 6 and see how you get on,should give good quick throttle response which is what you need for 3D flying.

 sonerai 17 points

Thanks for your contribution Gary, will give it a try.

 Gary 2959 points

Please let me know how you get on.

 tonee123 42 points

Im in the process of a plane build using the JC 23cc on a profile aeroworks prox260, very curious how Sonerai made out with his setup and the 18x6 that Gary recominded, any tips ill take

 sonerai 17 points

Hi, I didnt have a real lot of success with the JC 23cc engine,not a real lot of low end power,would not pull out of a prop hang easily,tried a range of props, the Xoar 17x6 was the best,ended up fitting a DLE 20cc with the 17x6 works great.