S3674-2370 Brushless Inrunner 2370kv (19.5T)

 darren 10 points

wicked!! loads of torque due to motor lenth $ kv !!!

 jeffrey 669 points

Yes the hobbyking 150A esc will work with this motor.This is a good motor for the price.I have several in my boats.Hope this helps.

 marty 1 points

depends on how much you pay for shipping, i,ve had some deliveres in 3 days and others taking 2 weeks

 jeffrey 669 points

I will say it is more like 1400 to 1500 watts.I have 6 of these black beasts.I have them in boats and trucks.Boats take the most amps and watts and this one will hang with $150 ones for a fraction of the price.I will say that it needs proper cooling because it does get hot if you push it,gearing or prop size.Prop size on 4s no bigger than 45mm 2 blade.Hope this helps.

 DjFlipnautikz 5 points

This is motor well do great in the e-revo, don't know exactly though if it is 4-pole. i would like to know as well.

 jeffrey 669 points

It will work in your E Revo but it is a 2 pole motor.Even though it is a 2 pole it does have massive power,over 2 horse power.You can't beat the price.Gets warm on 4s so if you run this motor ,get a fan for it.Hope this helps.JK.

 jeffrey 669 points

Yes it is a very powerful motor (1600watts)It will work in your truggy.Use a fan and don't go over 4s and you will be fine.Temps should be checked depending on your gearing.Great motor ,have run them in my trucks and boats.Does get hot if you push it.Hope this helps.

 Luiz 42 points

Thank man!

 DjFlipnautikz 5 points

Yea it will work. but like they said always keep an eye on the temps.

 Luiz 42 points

Thanks!

 jeffrey 669 points

Yes it will do the job,massive power.Make sure you put a fan on it because it does get hot on 4s.You mwill be pleased with the power.Your Revo will fly on 4s.As for the esc it will work but the Turnigy car esc's tend to be better quality.And converting to brushless is great,I have been running nitro for over 20 years,cars,trucks,boats,and planes and I now only electric,you can't beat the power and NO mess.Hope this helps.JK.

 reflexsa 1 points

Yes thanks, this does help.
I was planning on getting a fan and hs anyway :-)

I shall try on 4s, if it's not going well I will go less cells and change the gearing.

Thanks for the advice on the esc, any specific turnigy model I should look at?

The os motor I have runs like a dream, but as I said noise and mess... I also had a taste of brushless recently and was impressed!

 jeffrey 669 points

Hi,The turnigy Trackstar 120 amp Short course Truck,Product number 9052000011 is a great choice.I know it says short course truck but is plenty powerful enough for the revo.Check out the reveiws on it ,it also has a 720amp burst.Also in the reveiws they talk about how much better it is than the HK version.Hope this helps.JK.

 reflexsa 1 points

Thanks for the advice. I purchased one of these motors and the Trackstar ESC you suggested. The Revo absolutely flys now, motor does get slightly warm, but not to bad.

 jeffrey 669 points

Glad I could help.Great motor for the money..

 jeffrey 669 points

They usually just go,you have probably got it hot and the magnets are fried.HK has a brushless motor checker that you can order.Check your solder connections, your ESC to motor connectors,if they are a year old they need replacing if your running them hot,they will have more resistance and not carry as much voltage.That could be it.

 Alexander 1 points

Yeah it gets hot, but i had a castle creations fan on it as well as a small heat sink

 Victorvs 952 points

yea, buy and test it

 jeffrey 669 points

I have two of them,they do make 1600 watts,they also heat up. So I would not run over 4s on them.I have them in boats with water cooling.If you are going to ues them in a truck or car make sure you use a fan.These are nice motors and you can't beat the price.Only have 4mm connectors.I have replaced them with 5.5 bullet connectors.Mine in my boats have been running for over a year with proper cooling.Hope this helps.

 jeffrey 669 points

I am not familar with the trooper but if it has a 540 size motor it will work.Same mounting holes as 540 size motor.It has alot of power and is good up to 4s lipo.It has a 5mm shaft and not a .125 shaft like 540 size motors,so you will have to get the correct pinion gear for you application.Hope this helps.JK.

 Matthew 10 points

Its a 2 pole 7 turn, same as a LBA3674/7T

 jeffrey 669 points

This motor is a little big for the slash 2 wheel drive and too low kv for 2s.Im running a 3900Kv with 3s.It would not be much more than stock with that set up and this motor has a 5mm shaft so you can't use your stock pinion gears with 1/8 shaft. However the esc you should get is the Turnigy 60amp esc,its a great esc with many program features and as for the motor I would recommend the ez-run 3900kv,its cheaper and you will not be disapointed and your pinoin gears will fit and it will also work

 james 5 points

It looks and feels like a 550 motor, but it's listed as a 540.

I've purchased this motor for a slash 4x4 basher upgrade (saving money instead of Mamba Max) and it needs at least 3s lipo, 4s lipo to run fast. However, it did keep up at the track with my friend's Mamba Max Pro setup, although this motor got hot faster.

 jeffrey 669 points

I have one of these in my boat and I always used Feagio all XL,s. This motor runs circles around the Feagio. Much more power.I have cooked 4 Feagio,s and this one is still running like a champ.I know its not in a truck but a Boat has a constant drag and is rough on motors.Im running 6s and it does get hot but not too hot(big watercool jacket).I would reccomend a fan,you can get one if you order this motor,HK has got them for about 5 bucks.Hope this helps.

 jeffrey 669 points

Everybody wants one.They can not keep them in stock.

 ESCORIA 13 points

This kind of motors has a lot of orders and, I think, Hobby King can't send all demand

 numse 154 points

Fik en for ca 3 uger siden. Du skal väre hurtig på afträkkeren, de er borte på et par minuter/timer.
Hygge Henrik

 UndercoverAddict 18 points

It's a good motor, but it runs pretty hot compared to the motors that cost 4 times more.

 perrochicho 3 points

yos que cosa mas buena hobbyking

 Ivan 2 points

i've tried it in my e-revo. Slightly less performance compared to neu motor 2200kv. But its way hotter than the neu motor. Worth the price of it.

 jeffrey 669 points

I would stay with 4s.I tried 5s got too hot,and will heat up bearings.Great Motor.

 sparkie 325 points

Very easy to find out how many poles. Mark the shaft (not permantly), Rotate through a full 360 degrees counting each detent. It will always be an even number. Once you have that number, divide by 2 and that is your number of poles.

 Pijoy 5 points

The problem is that I do not have this engine, I want to just buy it. Purchasing addictive than the number of turns because my controller requires it.

 sikeston34m 64 points

I believe you are asking how many turns this is, but it is a 2 pole motor.

ESC's have a switching limitation on rmp's where the pole count is a factor. You should be fine with this one as long as your esc can handle the amp load.

 H-KING_SCOTT 5160 points

This motor is good for 2s to 4s lipo.

 MasterB 105 points

It is a 2 pole motor

 mike123141 260 points

If you look at the Car Power System under the brushless motor selection, you'll see this motor paired with a 150A ESC. This appears to be the same motor only by itself. That system can handle 6s, so I would assume this can handle 6s.

 mikhail 43 points

6s would be really pushing it. even 5s would be a bit fast for it but should be fine as long as you have enough cooling

 benjamin 25 points

with this kind of motor 35-40 rpm are a max. so with 2370 Kv, you reach the limit with about 15 volts, 4S seems to be the good limit to avoid thermal issues

 Duane 5 points

I just bought one. It is a Suxfly B36-74. It looks like they also call it a B540XXL on their website. I hope this helps in looking up specifications.

 MasterB 105 points

This motor can handle 4S (14.8V)

 eggnuts 2 points

I buy this one..n im use to my pursuit boat from Hobby king.. Esc 180A hobbywing, prop 445 octura, lipo use 4s, lipo 6A Hit 90-100 km/H