|
26/07/2010
Pygar (16%)
I am waiting for this bird is in the mail. Does anyone have experience with the power setup for the HK-600GT.
I have the Align 100A ESC and the Turnigy 600H Typhoon(max 80A). Included in set is a 10 teeth 5mm pinion V.S. a 14 teeth in the original T-Rex600 ESP set.
Is Turnigy T600 (1100kv) with a 15 teeth 6mm pinion better with my ESC?
|
|
|
| |
|
Nelson
(50%)
based on 6s avg rpm is 2042 on a 15t pinion with 11000kv. any higher packs and you need to lower your kv.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Pygar
(16%)
The Align original setup has a 600M Brushless Motor(1220KV) with 14 (15 opt.) pinion. I am not much into measuring headspeed, but I tune the throttlecurve to what sounds right. I will assembly the parts I have, and consider the 600M with 14t. Thanks for answering.
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
26/07/2010
ttkoh (100%)
Hi All
Has the pin and the washout base issue been solved by HK. Also, care some of the experts here share their flying experience with this heli. Thanks.
|
|
|
|
|
|
|
|
|
23/07/2010
tunazo (34%)
What sap Hobbyking?, the delay in ordes sucks!!, many people have the same situation, please hurry up or your clients let it go!!
|
|
|
| |
|
growmaster4
(47%)
woo hoo,their in
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Pygar
(16%)
HK can now deliver this bird.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
21/07/2010
Ghostflyer1 (43%)
How Long do you expect this to be on a back order status?
Ghost
|
|
|
| |
|
geminis
(70%)
i made my buy the 1-07-2010 .. 20 days ago ... and stel waiting the stock ... when i buy the backorder status was -4 ...
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
kevin3286
(-200%)
FYI
I have been waiting since May for mine! I would suggest you cancel your order and pay a little more some where else. I am having to go through PayPal to get my money back.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
growmaster4
(47%)
hopefully its taking so long because they are addressing gall the issues with the heli,and hopefully adding the burgundy cano with the see thru windshield
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
growmaster4
(47%)
its back in stock now.....wooo hooo,cant wait to get my hands on her
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Ghostflyer1
(43%)
Friday I bought me another project to build because im bored in the evenings and Sat my phone goes DING SAT about noon my phone goes off and they are now in stock. D*&% i just spent my alotted play money for this month. Let me know what you guys think of this batch. Hopefully they have addressed the previous problems. :( Maybe next month.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
19/07/2010
geminis (70%)
STOCK ..!!!! Repose stock please i have my buy from 20 days and there is no stock. !!!!
|
|
|
| |
|
Caferacer84
(60%)
Yes please stock up im waiting to
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
growmaster4
(47%)
me too,hurry please
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
tom sanders
(30%)
i also have have been waiting over 20 days for the 600 be patient they will come rome wasnt built in a day give hk a fair go
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
18/07/2010
nick0780 (50%)
Can I use my flybarless head from my trex 600? Is the main shaft the same as a trex 600? Thanks
|
|
|
| |
|
Pygar
(16%)
It is 10mm and yes you can use T-Rex 600 flybarless on this bird.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
12/07/2010
Gaetano (-50%)
How Many Servos does this model take and should I insist on buying good/fast servos?
|
|
|
| |
|
mysticmead
(50%)
all electric 6ch Helicopters take 4 servos. This takes standard (full) sized servos and yes, get the best servos you can.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
bradford1040
(91%)
Well, you have asked a question that you should rely know. I think that you should do a lot of research on what is needed as far as torque for the control of the blades instead of getting the fastest servo's. A good smooth movement servo is also very important, that is why there are air and surface types of servo's, of co**** that does not always stand true, but for heli's only use air servo's and don't get ones that have bad reviews on here. Remember that if even one servo fails your 600~2000usd is going to be headed towards the earth at a very fast speed, and will break on impact! So don't skimp on servo's is the best advise for anyone planing on this bird! That being said there are good cheap servo's on this site that work very well, just read the reviews and learn from others mistakes!!!! They are trying to save you the money and heartache from getting a bad item, not bashing cheap items!
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
10/07/2010
Pygar (16%)
The HK and EXI helicopter have identical parts. I will get a HK600, but since the EXI600 has got a new rotorhead, I will wait for it to appear at the HK600. Does anyone have an idea about how long it will take? See inserted file.
|
|
|
| |
|
bradford1040
(91%)
There is not a new type of head it is just machined different is all, not better. The exi600 mite be more money also, once again not better. I have align and HK-heli's and copterx birds and have had exi birds to, the one truth of all the clones are that there are parts that need to be replaced out of the box, like the main and tail shafts and some clone bearings just don't hold up, but my best advise would be to you and others is to get this bird not the exi because you will want to change out the head parts ether way!
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Pygar
(16%)
Thank you for good answer. It is true, the EXI450 V2 bearings are ***r quality. One had a mix arm bolt missing and the other was way out of balance somehow. I am trying to sell the unused last two EXI450 V2 heads. I am very pleased with the KH450 V2 replacement head with 4mm feathershaft. You are right, they look identical but are very different quality wise.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
10/07/2010
prosit (39%)
Could you please stock the HK600 in the DE warehouse? I would buy one.
|
|
|
| |
|
Peter
(75%)
Yeah, I would buy one too from DE WH...
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
BPGoa
(98%)
me too
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
bovinet
(40%)
me too... ! ind i know a lot of people with the same interest buying from DE wh...
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
25/06/2010
Supafast Raptor (50%)
Hi, does any one know if you can fit in two Turnigy 3000mAh 20C (HK500GT) batteries wired in parallel for a 6S 6000mAh set-up? Does the balance of the heli work out o.k. like this?
|
|
|
| |
|
markos51
(14%)
yes no problem with balancing but 2 batteries 3 s 3000 mha parallel will give you 6000 mha but 3 s.
If you want 6 s connect in series but then you will have 3000 mah.
The more weigth you can add without a problem is 5000 25 c 6 s.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Supafast Raptor
(50%)
Thanks for reply markos51 I have four 6S 22.2v 3000mAh 20-30C HK500GT batteries, I use 2 connected in parallel (6S 6000mAh) to fly my Raptor50 nitro converted to electric. Just wondering if 2 of these batteries would fit under the 600 canopy and balance o.k. to save me
buying a single 6S 5000mAh battery to fly.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Pygar
(16%)
Its a tight fit fastening the canopy. I use 3Ah single pack 6S, and they must be positioned with care to get the canopy fastened. Fitting 2 2.2 Ah in serial is also a tight fit. I have read that there exists a modified frame allowing more battery space. Weight is about the same. I have ordered a 2.65 Ah 6S that I hope wil be better for the HK500.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
4/05/2010
miketommer (52%)
Dose anyone know if they fixed the problem with the tail gear drive slipping on this last batch of HK 600s?
|
|
|
| |
|
pippo65
(15%)
Yes, latest revision works well. Also replacement part it's ok! But I prefere Align original part for this tail transmission
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
29/04/2010
Ace6767 (77%)
Something to watch out for folks! I flown my a few times but the tail gear sytstem came loose on my second flight like the 450 used to remember! spinning on the shaft! easy fix in twenty min or less just drill a hole thru top of gear thru shaft and tap a screw with some glue presto back in the air
|
|
|
| |
|
Burnaby
(75%)
HK has to either fix the tail gear slip problem or publicize it. Yes, Problem is well known in the forums, YES HK is responsible for informing the buyers and NOT expect them to discover it by forum or crash.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Shea
(24%)
for the money it is bound to be a problem or two pr three but HK does watch these forums and correct all problems noted by numerous people the only problem is HK distributes to the world on a very large scale and they must "pre-order" all the parts to put together there helicopter and it is hard to change a part is production quickly i am sure they are addressing the issue but will not lose money to change it... for these prices i dont blame them, until then replace the few questionable parts with brand name
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
26/04/2010
pantelejev (78%)
Moin moin! 35 Tage jetzt ist der HK600GT da. Wer schneller mchte sollte auf DHL verzichten. Wie schon fter gesehen, ist bei mir auch der Akkutrger abgebrochen, wird wohl vom "Hersteller" so gemacht, denn Verpackt war alles prima.Jetzt gehts an den Zusammenbau und ich melde mich wieder. Alles in allem ** DANKE Hobby-King!
|
|
|
| |
|
Jens1988
(18%)
Hast du dein Heli schon zusammengebaut habe mir auch ein HK600 geordert.Bei mir ist ebenfallst die Akkuhalterung gebrochen. Mit was fr ein Setup fliegst du?
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
23/04/2010
Cartoon Master (23%)
mine came with 10 servo screws !!!! there must be 16 of them!!! how can i get them ???? there are no spare parts available yet, like in the 450 aloy .. where are the replacement parts ????
|
|
|
|
|
|
|
|
|
7/04/2010
jose oliveira (43%)
I bought a scorpion 4025/740 to setup mi hk 600, but unfortunately ( and apparently) it doesn't have space to this motor.It doens't fit in !!!
Can some guy explain to me how can I put this motor in this helicopter?
TRhank you
|
|
|
| |
|
nowinkk
(85%)
You need to cut the frame a little to intall the 4025/740 Scorpion motor.
|
|
|
This customer was awarded a credit for their answer.|
Was this the best answer? YES | NO
|
|
| |
|
GMAUU
(70%)
try to install the motor from upward....like the new align 700E
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
jose oliveira
(43%)
Yhank you very much
jose oliveira
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
progti
(17%)
Hello!
Someone say, you have to grind the frame to fit the motor with more than 47mm diameter.
regards
Denis
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
pippo65
(15%)
.
I have putted 1,5 mm alluminium stripes on each side of motor mount, like a spacer.
Carbon fiber are lightly flexible, so it's ok...
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
1/04/2010
pantelejev (78%)
Pantelejev Wait for this heli makes me mad. If only I knew where he is. He is paid 10 days ago. Status processing.
|
|
|
|
|
|
|
|
|
10/03/2010
IANOS (34%)
Is it possible for someone to tell me if anyone has flown the HK600GT? Could you also inform me of what kind of spare parts did you use?
1.servos (for the tail and the blades and how many)
2.Gyro
3.Brushless motor
4.Speed controller
5.Batteries
Thank you!
|
|
|
| |
|
Burnaby
(75%)
Check out the forum, helicopter haven, 600GT thread.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Pygar
(16%)
I use the turnigy 620 servos for the swash, Turnigy Typhoon 600 heliengine and Futaba 520 for the tail. Tailservo and ESC are the Align original ones.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
10/03/2010
IANOS (34%)
Is it possible for someone to tell me if anyone has flown the HK600GT? Could you also inform me of what kind of spare parts did you use?
1.servos (for the tail and the blades and how many)
2.Gyro
3.Brushless motor
4.Speed controller
5.Batteries
Thank you!
|
|
|
| |
|
GMAUU
(70%)
i used all align parts....as it is easy to get
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
2/03/2010
Thejonesfather (85%)
Jason lower shipping and you know throw blades in for my new hk600gt.. I was thinking trex but I like you and hc. And I like the thought of 700 electric. Sorry nitro people I've had nitro planes cars and boats I'm done with nitro! I hate tunning tweaking and the smell and taste of nitro u know try to purge it and well u know. I could only imagine how hard nitro in helis are to maintain with everything
***** can't wait I orderd my 600 gt get here dam it!! .. U no backorder c ya
|
|
|
|
|
|
|
|
1/03/2010
Johanneke (53%)
Jason,
Do you have an idea when you would be able to put the spare parts online.
|
|
|
| |
|
briangp
(96%)
You should go to your hobby shop and use align parts. That's the idea with this helicopter, its inexpense, so as you break parts, you slowly replace them with Rex 600 parts
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
GMAUU
(70%)
yes ...just use align parts as i did.....
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
28/02/2010
Thejonesfather (85%)
Hi I am stoked I just bought the hk600gt it better be great. I have the hk500gt right now I wish it had more carbon fiber I kinda like you know fully load air frame and I hope it's all cf and aluminum. Anyone set this thing up yet? I was going to get the trex 600 but it would be in like a year before I could afford it but I hope this is just as good. Thanx oh yeah hk500 is my first heli and hk600 will be my second crazy right? I hope I can find someone in Vegas can help me fly it. I just like to build them it's fun for me. Good luck thanks for reading and thanks hobby king for these great helis and prices keep it up and get everthing in stock! O lower shipping prices
|
|
|
|
|
|
|
|
27/02/2010
HIflyerer (94%)
Have the head pins been corrected on the second batch? I'm looking for an used head from a fbl conversion before I try to drive them out.
|
|
|
| |
|
chuck12
(91%)
What is the head pin issue?
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
HIflyerer
(94%)
The pins sticking down from the head are too short, and if you set up the swash for full negative pitch and use it, the washout base will fall off and you will crash. You can heat the head with a torch and make a tool to push the pins down to the correct length, but I'd rather not.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
briangp
(96%)
Id be interested the hear the answer to this issue. I did read about it before, but did anyone prove that this could actually happen? I haven't seen a finished one yet, and regardless Id just go buy an align head
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
edk187
(75%)
To correct this problem, just rise the shaft collar under the swash plate accordingly, so the pins cannot come out from washout base. yes, this will limit the negative pitch by a bit which is OK.
I did the same fix for my 500. Actually, this is
not a fix, it is the proper adjustment of all components.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
heliberlin
(100%)
*edk187: so you never fly inverted? Becuse you only get -4 pitch. You must correct the pins also for autorotation.
The overall quality is really bad and dnagerous to fly with. Threats are faulty. So headscrews will not kepp well. Bearings are mostly faulty. Beware of your life, folks. I son't believ anybody has acutally flonw it as it arrives from theshop. It's dangerous. Besides, main gear doen't work and will alomst block the rear gear.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
chuck12
(91%)
I moved head pins to 21mm. Heated head with butane lighter and pulled down the pins. Took about 5 min.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
chuck12
(91%)
I moved head pins to 21mm. Heated head with butane lighter and pulled down the pins. Took about 5 min.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
27/02/2010
Robbie (82%)
Where are the "linked items below" as said in the description ?
|
|
|
|
|
|
|
|
|
22/02/2010
TTrombet (47%)
Sorry if this was posted already but can you post a completion list for this heli with suggested parts..Thanks!
|
|
|
| |
|
briangp
(96%)
Look just above your post..lol
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
briangp
(96%)
Look just above your post..lol
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
TTrombet
(47%)
Yes, I saw that...I mean the actual parts with part numbers, etc. Thanks for your response.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
19/02/2010
kc10kevin (89%)
Curious. Submitted a review of this heli yesterday and it doesn't show up. Do they have to be reviewed/approved by the staff? Listed good/bad about the quality of components and censored?
Any ideas folks?
|
|
|
| |
|
briangp
(96%)
I posted something on this tab ealier as well and it didn't show... not sure the process but I bet it will show up.
Looks like we only live a short drive from each other...Cape Cod here.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
ericzhangva
(78%)
I posted reviews a couple of times in the review tab in this screen and they did not show up either. However, if you submit your review from you account (after sign-in) it will show up.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
pastoreli
(90%)
kc10kevin, would be very welcome your review to me that I am undecided between the HK600 and GAUI 550. Post here in discussion.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
kc10kevin
(89%)
Well here is close to what I wrote: (I have a Trex 600 to compare it to)
1. VERY impressed with packaging.
2. Nice that the head/fuselage was already assembled. Saves a lot of time. Some people like to the build from scratch.
3. Parts are good quality, but a little rough around the edges. CF has small flaws, CNC parts edges are not finished smooth in some areas.
4. Locktight was used on most parts. Even the Trex 600 kit did not have lock tight on a lot of parts.
5. Nice to have 3 bearing blocks like Trex earlier version. Head wobbles on 600ESP.
6. Canopy is plastic not FG.
7. Tail rotor control arm was broken in half (plastic). Ordered a one ($4).
8. Tail slider binds. Ordered a new shaft and slider replacement.
9 Overall, very impressed for the price!! I would definately buy again!
Don*t hesitate. Great machine.
Here is my setup:
GOING FOR A 12S Setup (Higher volt/lower AMP)
HK-600GT Kit
ESC: Castle Creations HV-110
Motor: Scorpion 4025-630
Cyclic Servos: BMS-621DMG+HS
Tail Servo: Turnigy BLS980
Gyro: Align GP780
Batt: 2 x Turnigy 3000mAh 6S packs
UBEC: Turnigy 8-15A
600mm CF Blades from Hobby King
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
MrNiceGuy
(72%)
No need to go with a HV-110. The HV 85 will work just fine. I'm running one on my T-rex 700E conversion. 12S, HV85, Scorpion 4035-560KV. Mine never gets too hot even when pushed hard. Yours won't be pulling as much current as mine. Just a suggestion to save you a little money and weight.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
kc10kevin
(89%)
Thanks Niceguy. I know it is overkill, but I got a great deal on one: $175 new. Thats about the same price as a new HV-85.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
briangp
(96%)
Kc10kevin, shoot me an email at 'b p u h l * hotmail****' I want to stay in touch, do you ever come up to Plymouth? CMEHobbies?
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
T-REX250-700
(39%)
* Mr.NiceGuy:
I am very interested in your T-REX 700E, because a friend of mine build frames for the 12S 700E Version. NO CONVERSION KIT!! 700e with some modifications. So what about the TURNIGY K-Force 120A-HV OPTO 5-12S Brushless? Which BEC do you use? Could you send me some informations to office*rcpiloten**** ?
Thanks Manfred
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
17/02/2010
MojoMaestro (65%)
And I bought 500mm & 550mm Carbon Z-Wave blades,I was told it could fit my EXI 500 CF but its just too dangerous. Could those blades be OK for this model.
A real Expert comment on this one, or a staff member, i dont wanna face the same issue again.
|
|
|
| |
|
bart123
(59%)
550mm will be minimum but not recommendet as this heli is relatively heavy. It's 50 class so 600 - 620mm is optimum.
|
|
|
This customer was awarded a credit for their answer.|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
17/02/2010
MojoMaestro (65%)
And Jason can get a way to make sure the funny guys that only write things like *$$#^&R&* to get discount codes, making sure they dont get it. Its like an insult to you and our community of hobbyist.
|
|
|
|
|
|
|
|
|
17/02/2010
MojoMaestro (65%)
Wow , its actualy 360$ less then the Align
CF (Carbon fiber) Version . HK Bravo!!!
Good move to do this model , after seeing the succes the EXI models have. Making a 600 is to make Quality accessible. In the name of my fellow hobbyist I Thank You HKing .
|
|
|
| |
|
MojoMaestro
(65%)
BTW I only buy clones... Kit, servos, motors, etc.
100% cloned models I have ( Class 400,450,500 & now 600) YupYup :)
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Swashplate
(75%)
I do not think you would want to run 500mm blades on a 50 size machine especially a beefy one like the 600. To get sufficient lift you would need to increase head speed significantly, something I personally would approach with great trepidation on a model of this scale.
|
|
|
This customer was awarded a credit for their answer.|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
16/02/2010
Trx1986 (67%)
When Will there be a Link to sugested parts for this hk 600. After discription of heli it says see link below for parts but there is no link.
|
|
|
| |
|
Sweden
(79%)
Yes add links to suggested parts from HC...
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
13/02/2010
Thejonesfather (85%)
Hi when will the next batch of hk600gt be In and also can you guy stock up on electronics so we don't have to wait 6-8 weeks and of cousre spare parts. Also what gyro is everyone using.
.. I'm sorry but i've been waiting and I know alot of other have been too... And it sucks to wait for motors and esc s when hk has the heli... Please try to have everything we need in stock or jason put a packege togather with all we need to fly except tx and rx thanks
|
|
|
| |
|
Jason5001
(-7%)
We're on it.
Motors are arriving in 3 weeks
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
pantelejev
(78%)
Moin moin. Der HK600GT ist schon beeindruckend. Ohne HK haette ich mir noch lange nicht dieses geile Teil leisten koennen. Das Zubehoer wurde super schnell geliefert. Leider ist das deutsche Warenhaus wenig bestuekt sonst waere es unglaublich einfach solche Teile schnell in die Luft zu bekommen. Der Wermutstropfen sind : kurze Gestaenge ( Servo - Taumelscheibe ) und das grosse Getrieberad "eiert" in alle Richtungen. Antistatik - Kabel nicht vergessen, sonst macht das Ding ungewollte Spruenge. Bis hierhin sehr zu empfehlen der Kauf bei Hobby King. Danke
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
13/02/2010
mattavoboo (25%)
when will parts be available?
|
|
|
| |
|
downloader
(75%)
I think in about 2-3 weeks.
Thanks!
|
|
|
This customer was awarded a credit for their answer.|
Was this the best answer? YES | NO
|
|
| |
|
Tom
(50%)
It's now the 2nd week in April and still no parts...what gives?
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
|
|
|
|
|
12/02/2010
tecman (22%)
price too high for Italy $ 139.
is the product less attractive to HK this year.
sold only if align mechanics probably cost less
the cost of just 600 seconds I would be HK $ 120 HK ... I saw that recently increased the prices compared to 2009.
perhaps should not buy from HK as before ...
regards
|
|
|
| |
|
mirceacul
(69%)
didn't understand anything from what you are saying! "the cost of just 600 seconds I would be HK $ 120 HK ... I saw that recently increased the prices compared to 2009" ???
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
bradford1040
(91%)
please don't take drugs before you ask questions on this site, most of us will help you if you ask. I myself have no clue on what that question is. If you re-write it we will answer you with a good answer! But please do it sober!
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
12/02/2010
sbsam (37%)
Please, HK600 Nitro!! Nitro!! will be most better thing!
|
|
|
|
|
|
|
|
|
11/02/2010
Christian (74%)
I'm waiting for the Torque Tube version.
Should be a HK-600TT version coming, atleast I'm hoping
|
|
|
| |
|
REISDESIGN
(32%)
yes! I waiting!!!
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
marcosfmm
(54%)
what is the real dirference to this one, why the TT is better
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Christian
(74%)
I like TT because it offers better tail control than a belt (Requiring good servo/gyro) and that you dont have to tension the belt as it stretches with age. The only downside I see is the fact that only a very minor ground hit with the blades will shatter the gears connecting the TT.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
bradford1040
(91%)
well this is a big argument, I like belt myself, there are /- on both sides but as far as performance there is NO and I mean no difference that anyone person can come up with for ether. There is always going to be both versions and it comes down to personal choice and what works for you!
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
11/02/2010
alergigo (68%)
it,s is compatible with trex 600?
what parts?
good good work hk,, if you don,t stop making this nice kit,s you ruin me.
|
|
|
| |
|
pantelejev
(78%)
Wait for this heli makes me mad. If only I knew where he is. He is paid 10 days ago. Status prozessing.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
11/02/2010
johndyl (85%)
i am more interested in the upgrade parts.. any idea when it will be available? will there be a GT version? with TT?
|
|
|
| |
|
downloader
(75%)
I think that this already is the GT version with carbon and all of the bling. They might sell an upgrade kit for TT.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
bradford1040
(91%)
This is the older version of the trex600 not the new esp version, but there is a T/T tail set sold buy align at this time for a avg. price of $110usd. this version of the trex600 in my opinion is the better one, the newer esp has not been a big step forward, there are some that will disagree, but you can't go wrong with this bird!
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
11/02/2010
nowinkk (85%)
Simply unresistable. I am buying 2 units for my CNY presents. Jason, do you need one?
|
|
|
| |
|
CorollaGT
(67%)
No I don't think he needs one but I sure does need one :)
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
11/02/2010
johnny974 (72%)
Hi jason5001
for the motor should have a 1200Kv normal flight 14T pinion and 15T 3D or 1600Kv motor pinion 10 normal flight is in the box and 11T Flight 3D
then be pinions and motors to choose
|
|
|
|
|
|
|
|
|
11/02/2010
sorroche (75%)
the blades tail in the kit???
|
|
|
| |
|
Jason5001
(-7%)
Yes, the tail blades are in the kit, as shown in the photo.
Thanks.
|
|
|
This customer was awarded a credit for their answer.|
Was this the best answer? YES | NO
|
|
| |
|
Johanneke
(53%)
Jason,
Do you have an idea when you would be able to put the spare parts online.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
.jpg){kind=small}
